First, check whether the problem in your study is the internet connection or the Wi-Fi, and try moving the existing router to a better position if needed. If you need more coverage, a wired access point or wired mesh node is a good option if you can run a cable. Without a cable, wireless mesh can work as long as the nodes have a strong enough signal between them. Also consider the number of nodes, connections and any recurring costs, rather than looking only at the advertised Wi-Fi speed.
Who is this advice for?
Student in a distant study
Wants reliable Wi-Fi in the furthest room, particularly for studying and video calls. The router’s position and the connection to an extra Wi-Fi node are important. The Dutch Consumers’ Association points out that distance and obstacles such as walls and ceilings can weaken the signal.
Manager of a shared home network
Wants to use several laptops and phones at once, and work out whether the internet connection, router or Wi-Fi is the bottleneck.
Budget-conscious housemate
Wants to check first whether moving the router or adding a single Wi-Fi node in the right place will be enough. With a kit, the number of nodes and any subscription costs for extra features also matter.
What should you look for when choosing?
Start by measuring and checking where the connection is failing. Then decide whether to move the router, add a wired node or use wireless mesh.
| Factor to consider |
What should you check? |
Which consumers is this for? |
| Coverage in the study |
Compare Wi-Fi in the room with a wired connection test at the router. Check whether you can run an Ethernet cable to an extra node. |
Anyone studying or making video calls in the furthest room will want reliable Wi-Fi there; around 42% of consumers rank coverage in that room as their top priority when buying. |
| Using multiple devices at once |
First, test the internet connection using a wired connection. If you’re using wireless mesh, also check how the nodes connect to each other. |
Anyone sharing the network for activities such as studying and video calls will want to know whether the internet connection or the wireless link between nodes is the limiting factor; around 25% of consumers prioritise being able to use multiple devices at once. |
| Total cost |
Compare the number of nodes and any cables you’ll need. Check whether the extra features you want require a subscription. |
Anyone looking to avoid unnecessary purchases will want to know whether moving the router or adding one node could be enough; around 17% of consumers rank purchase and running costs as their top priority when buying. |
| Management and security |
Check for the management features you want, such as a guest network and access to updates. Also make sure the chosen kit will work with your existing router in your preferred setup. |
Anyone managing a shared network will want to be able to manage settings and housemates’ access clearly; around 16% of consumers prioritise management and security. |
A wired access point provides Wi-Fi in an additional location without needing a wireless connection between nodes. Mesh can be useful if you need coverage in several rooms. Without a cable, an extra mesh node still needs to be placed somewhere it can make a reliable connection to another node. Simply replacing the router in the same unsuitable location does not guarantee better coverage through walls or ceilings.
Common buying mistakes
-
Choosing the fastest Wi-Fi for coverage in the furthest room
A speed rating alone doesn’t tell you what kind of connection you’ll get in a distant room. Distance, walls and the connection between mesh nodes all play a part.
Measure the connection where you study, and check the route between the nodes if you’re considering mesh, before comparing models by their speed ratings.
This helps you avoid choosing a more powerful router or kit when moving your existing router or adding a node in the right place could solve the problem.
-
Putting a wireless mesh node in a dead zone
An extra node still needs a working connection to the rest of the network. A node placed where there’s already no reliable signal can’t restore that connection by itself.
Start with a midway location where the node can still connect to another Wi-Fi node. If the layout of your home rules out a suitable wireless location, consider a wired connection.
-
Confusing model variants or kit sizes
A PoE version, a standard model and a kit with a different number of nodes may differ in their power supply and installation requirements.
Check the full model name, power method and number of included nodes in the product information for the exact model.
You may need a different power setup or an additional Wi-Fi node if the version you choose isn’t suitable for your installation.
-
Assuming all extra management features are included
For the TP-Link Deco X50 tested by Tweakers, a subscription was noted as necessary for advanced security and parental control features. This applies to the tested version and not automatically to other models or brands.
Before you buy, distinguish between the features you need and optional services, and check the terms for the exact version.
The advanced features mentioned may require a recurring subscription.
Brands to consider
TP-Link
Deco mesh systems are an option if you need Wi-Fi nodes in several rooms. Compare standard X50 versions separately from the X50-PoE.
- Tweakers found the tested Deco X50 3-pack easy to set up.
- Tweakers found that performance dropped at more distant wireless nodes and noted subscription costs for advanced features. This applies to the tested version, not automatically to the X50-PoE.
ASUS
The ZenWiFi BD4 may suit a wired setup, while the BT8 is worth comparing for a more demanding wireless setup. The kits come in different sizes.
- Tweakers measured good performance with wired nodes on the BD4 3-pack.
- Performance was weaker over wireless backhaul on the tested BD4 3-pack. ASUS lists access point mode and two 2.5G ports per node for the BD4; this information does not prove how other ZenWiFi models perform.
FRITZ!
The FRITZ!Mesh Set 1700 can extend an existing FRITZ!Box setup. FRITZ! also says it can be connected via LAN behind a router from another brand.
- FRITZ! lists a gigabit LAN connection on each repeater.
- According to the setup instructions, the kit gets its own Mesh Master when used behind a router from another brand. Check that the network layout is suitable for your existing setup.
Linksys
Linksys describes the Velop Pro 6E as a system that supports both wireless and wired connections between nodes. This may be useful if cabling varies from room to room.
- The manufacturer lists support for 2.4, 5 and 6GHz.
- The speeds and coverage quoted by the manufacturer don’t guarantee a particular range in a home with thick walls.
Products for this situation
This selection includes mesh kits with multiple Wi-Fi nodes and a standalone router. Assess them based on whether you can use a wired connection, where you need Wi-Fi and how many nodes your home requires.
Image unavailable
TP-Link Deco BE68 (2-pack)
A mesh kit with two nodes to provide Wi-Fi in several locations; the description mentions both wired and wireless backhaul.
Wi-Fi 7 and MLO. The description lists Ethernet ports on each node.
Joybuy
Image unavailable
ASUS ZenWiFi BD4 dual-band (2-pack)
Suited to a setup with a wired connection to an extra Wi-Fi node; ASUS also lists access point mode for the BD4.
Wi-Fi 7, 2.4 and 5GHz. The description lists two mesh nodes and wired backhaul. ASUS lists two 2.5G ports per node.
Joybuy
Image unavailable
ASUS RT-AX52 Pro AX3000
A standalone router to consider if one well-chosen location could cover the rooms where you need Wi-Fi.
Dual-band Wi-Fi 6 (2.4 and 5GHz). The box contains one router; you’ll need another compatible router to extend the network using AiMesh.
Joybuy
Image unavailable
TP-Link Deco XE75 Pro (3-pack)
A mesh kit with three nodes for Wi-Fi in several locations; check that the nodes can connect to each other where you plan to place them.
Tri-band Wi-Fi 6E with 2.4, 5 and 6GHz. The description lists three Ethernet ports per node and guest access.
Joybuy
Image unavailable
TP-Link Deco X50 dual-band (2-pack)
A mesh kit with two nodes; the description mentions optional Ethernet backhaul, so cabling could provide a wired connection between the nodes.
Wi-Fi 6 with 2.4 and 5GHz. The description lists OFDMA, MU-MIMO and Ethernet ports on each node.
Joybuy
The Dutch Digital Infrastructure Inspectorate states that radio equipment placed on the market in the Netherlands must carry the correct CE marking. Check the marking on the specific device; a product listing alone doesn’t confirm that it has one.
Frequently asked questions
Do I need to replace the router if only the study has poor Wi-Fi?
Not straight away. Compare a wired connection test at the router with Wi-Fi in the study, and try moving the router to a better position. If the signal remains weak mainly in that room, consider a wired access point or a mesh kit suited to your setup.
Where should I put a wireless mesh node?
Don’t put the node right in the spot with no reliable reception. Place it somewhere in between where it can still communicate properly with another Wi-Fi node. If Wi-Fi is weak at the back of the house, the Dutch Consumers’ Association recommends placing it closer to the centre and avoiding as many obstacles as possible.
Will any mesh kit work in the same way behind an existing modem?
No. The right setup depends on the specific kit and network configuration. ASUS lists access point mode for the BD4; FRITZ! says that a FRITZ!Mesh Set 1700 connected behind a router from another brand gets its own Mesh Master. Check the instructions and the network layout you want before choosing.
Is wired or wireless mesh better for a distant study?
A wired connection between nodes is a sensible option if you can run an Ethernet cable, especially when walls or floors interfere with the wireless signal. Without a cable, wireless mesh may work if the nodes are placed where they can still get a strong enough signal from each other.
What marking must a Wi-Fi router sold in the Netherlands have?
The Dutch Digital Infrastructure Inspectorate states that Wi-Fi routers, as radio equipment, must carry the correct CE marking. Check the marking on the specific device; a product description alone doesn’t show that the version supplied meets this requirement.