Who is this relevant to?

House with network cabling

You want Wi-Fi on several floors and can use existing Ethernet connections for access points or mesh nodes.

House without cabling options

The Wi-Fi is weak upstairs, but you can’t run a network cable to the other floors. In that case, the placement of mesh nodes and the wireless connection between them are important.

House with lots of people online at once

Several residents and devices use the network at the same time. So, as well as coverage, consider the network setup and how it’s managed.

What should you look for when buying?

What to consider What should you check? Who is this important for?
Coverage on each floor Map out the rooms you use and any weak spots. Check the Wi-Fi in those rooms after installation. If I need Wi-Fi in different rooms and on several floors, I want to know where an extra node is needed. Around 36% of consumers say coverage is their main concern when buying.
Extending coverage without cables Check whether it’s possible to run cables to other floors. If not, see whether you can place a mesh node somewhere with a strong enough connection. If running cables isn’t an option, I’m looking for a wireless way to extend Wi-Fi coverage. Around 29% of consumers prioritise extending coverage without installing new cables.
Using the network at the same time Work out how many residents and devices are active at once. Check the connection at busy times and on several floors. If my housemates are online at the same time, I want the connection to remain usable in the rooms we use. Around 21% of consumers put simultaneous use at the top of their list.
Management and your existing router Decide who will manage the settings and updates. Check which features are available in the selected operating mode. If we want to keep our provider’s connection and router, I want to be clear in advance about who will manage the network. Around 14% of consumers say shared management and keeping their existing connection are their main concerns.

Common pitfalls

  • Assuming advertised coverage guarantees a signal on every floor

    The connection in your rooms also depends on where you place the nodes and the connection between them. A product claim doesn’t tell you how the network will perform in your home.

    Choose locations based on the rooms residents use, then check the connection on each floor after installation.

  • Treating an access point as a complete router

    The Ubiquiti UniFi U6+ is a wired access point, not a replacement for a modem or router. It uses PoE power and is managed through UniFi Network.

    Before you buy, check what router, network ports, power supply and management setup you already have.

  • Expecting features that aren’t available in access point mode

    According to TP-Link, features including port forwarding, parental controls and certain security features aren’t available in the Deco app when Deco is in access point mode.

    Choose the operating mode based on which device will handle the router functions, and check which features remain available in that mode.

Brands to consider

TP-Link

Deco is a mesh range with multiple Wi-Fi nodes. According to TP-Link, the three-pack Deco X50 has three gigabit ports per node and supports Ethernet backhaul.

  • Wired connections between Deco nodes are an option if Ethernet is available.
  • According to TP-Link, some router features aren’t available in the Deco app when using access point mode. The stated coverage isn’t a measurement taken in a specific student house.

ASUS

The ZenWiFi XD5 is a mesh system for which ASUS describes Ethernet backhaul support.

  • A wired connection between nodes may be useful if your home has Ethernet ports.
  • Check the exact package version and the connections you’ll need. The manufacturer’s description isn’t an independent performance test.

Ubiquiti

The UniFi U6+ is a wired Wi-Fi 6 access point for a setup where you can keep your existing router.

  • The official specifications list one gigabit Ethernet port, PoE power and management through UniFi Network.
  • Bear in mind the power supply and network configuration you’ll need. The access point alone won’t replace a modem or router.

Joybuy products for Wi-Fi with mesh nodes

These Joybuy products are TP-Link Deco mesh kits with two or three Wi-Fi nodes. Check how many nodes you’ll need to cover the rooms you use.

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5 (2.4 GHz/5 GHz)

With three mesh units, you can spread Wi-Fi nodes across different areas.

Dual-band Wi-Fi 5 (802.11ac); the product name lists 2.4 GHz and 5 GHz.

View at Joybuy
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6 (2.4 GHz/5 GHz)

The three-unit kit lets you spread Wi-Fi nodes across several areas.

Dual-band Wi-Fi 6 (802.11ax); the product name lists 2.4 GHz and 5 GHz.

View at Joybuy
TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E (2.4 GHz/5 GHz/6 GHz)

With three mesh units, you can place Wi-Fi nodes in different parts of your home.

Tri-band Wi-Fi 6E (802.11ax); the product name lists 2.4 GHz, 5 GHz and 6 GHz.

View at Joybuy
TP-Link Deco X50 (2-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (2-pack), dual-band Wi-Fi 6 (2.4 GHz/5 GHz)

The two-unit kit lets you spread Wi-Fi nodes across different areas.

Dual-band Wi-Fi 6 (802.11ax); the product name lists 2.4 GHz and 5 GHz.

View at Joybuy

Frequently asked questions

Do I need to replace my internet provider’s router?

No, not just to add Wi-Fi on other floors. You can use Wi-Fi nodes behind your existing router; with Deco, the router can continue handling router functions in access point mode. Ask your provider about the connection settings if you want to replace the device they supplied.

How do you connect Deco nodes using a network cable?

According to TP-Link, in router mode you connect satellite Decos to the LAN port on the main Deco, or to a switch connected to it. In access point mode, TP-Link says you can also connect the satellites by cable through your existing router. Check the instructions for the operating mode you’ve chosen.

What can I do if a Wi-Fi node has a weak connection upstairs?

First, check where the nodes are placed and the connection between them. If a network cable is available, Ethernet backhaul can replace the wireless connection between nodes. Without a cable, the result depends on the conditions in your home.

Can I use my own router in the Netherlands?

Yes. ACM ConsuWijzer states that a provider can’t require you to use a particular router make or model. Your own equipment must still meet the applicable requirements, so check your provider’s connection terms before replacing the device they supplied.

Who should manage network equipment and updates?

Agree on who will manage the settings and update the equipment. ACM ConsuWijzer highlights the importance of updates for the security of your network and personal data.