Who is this guide for?

Viewer who can run an Ethernet cable

Wants a connection to the viewing room that doesn’t rely on Wi-Fi through thick walls, and can use a cable or an existing network socket.

Viewer without a cable route

Has a weak Wi-Fi signal beyond internal walls and wants to know whether an extra wireless point can be placed somewhere the signal is still usable.

Viewer who wants to keep their provider’s network

Wants to start by taking measurements, moving the router or extending the existing network, rather than replacing the modem and router straight away.

What should you consider when choosing?

First, measure the connection at your streaming device. Then consider whether a cable route, an extra wireless point or a small change to your existing network is right for your setup.

What to consider What to look for Who should consider this?
Connection beyond the walls Measure at the screen; check whether there’s a network socket and whether Ethernet backhaul is supported. If I can run a cable to the viewing room, I don’t want the connection between Wi-Fi points to pass through thick walls. Around 36% of consumers prioritise a wired connection.
Coverage without a cable Test potential locations and check whether the extra point can still connect reliably to the router from there. If running a cable isn’t practical, I’m looking for a place to put an extra point where the existing Wi-Fi signal is still usable. Around 29% of consumers focus mainly on wireless coverage.
Connection to your existing router Check the available Ethernet ports, router or access point mode, and the instructions for your particular setup. If I want to keep my current modem or router, I’m looking for an extender that works with it. Around 21% of consumers prioritise keeping their existing network.
Avoiding unnecessary replacements Compare a wired measurement at the router with the connection at your streaming device, and try moving the router if necessary. I want to establish whether I need to buy anything before replacing my equipment. Around 14% of consumers want to start by measuring and making adjustments.

Common buying mistakes

  • Judging performance only by the speed at the router

    A good wired connection at the router doesn’t necessarily tell you what the Wi-Fi signal is like at the screen. The Dutch Consumers’ Association recommends a wired speed test to distinguish your internet connection from your wireless connection.

    Compare the wired measurement at the router with the one at your streaming device before replacing your equipment or changing your broadband package.

    A faster broadband package or a new router may not fix a Wi-Fi problem at the screen.

  • Putting a wireless mesh point where the Wi-Fi already drops out

    An extra wireless point still needs to connect to the network. If there’s hardly any signal where you place it, it can’t get around that weak connection.

    Try a midway location first. If you have a cable available, check whether the system supports Ethernet backhaul.

  • Assuming the stated range guarantees coverage through thick walls

    Manufacturer figures for range and speed aren’t measurements taken in your home. The Dutch Consumers’ Association assesses Wi-Fi range and speed in different locations.

    Check the coverage where you watch, rather than relying solely on a stated coverage area or combined radio speed.

  • Assuming any PoE power supply will work with the Deco X50-PoE

    According to TP-Link, the Deco X50-PoE supports the 802.3at and 802.3bt PoE standards, but not 802.3af.

    Before buying, check the power supply’s PoE standard and power budget for the exact model. TP-Link lists the DC adapter as an alternative.

Brands to consider

TP-Link

The Deco X50 is worth considering if you want mesh with optional Ethernet backhaul. The separate X50-PoE range may suit setups with compatible PoE cabling.

  • TP-Link says the standard Deco X50 has three gigabit ports. The X50-PoE has two 2.5GbE ports per point, according to TP-Link.
  • Not every X50 model supports PoE. TP-Link lists 802.3at and 802.3bt for power over the cable, but not 802.3af. The stated range doesn’t guarantee reception through thick walls.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh system for anyone looking to use multiple points, optionally with Ethernet backhaul.

  • ASUS documents a wired connection between XD5 points.
  • You’ll need compatible devices to benefit from Wi-Fi 6. ASUS’s stated speed and coverage aren’t measurements taken in your home, so check the package version too.

FRITZ!

The FRITZ!Repeater 1200 AX is an extender worth considering if you already use a FRITZ!Box; it isn’t a standalone replacement for your modem.

  • FRITZ! lists a gigabit LAN port and a LAN connection to a FRITZ!Box for FRITZ! Mesh.
  • It can be used with other routers, but don’t assume you’ll get the same FRITZ! Mesh features without checking first.

NETGEAR

The Orbi RBK763S is a three-piece Wi-Fi 6 mesh system worth considering if you want several wireless points and a dedicated connection between the router and satellites.

  • NETGEAR describes a dedicated connection between the router and satellites, and lists seven gigabit ports in total.
  • NETGEAR’s stated capacity and coverage area don’t guarantee reception through specific thick internal walls.

Joybuy products for Wi-Fi coverage

This selection features mesh systems with multiple points to extend Wi-Fi coverage. Check whether you want to connect the points wirelessly or have a suitable cable route.

TP-Link Deco X50 3-pack dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

A mesh set with multiple points to extend Wi-Fi coverage; Ethernet backhaul is optional.

3-pack; dual-band (2,4 GHz/5 GHz); Wi-Fi 6 (802.11ax).

Joybuy
Linksys Velop Pro 7 tri-band Wi-Fi 7

Linksys Velop Pro 7, tri-band Wi-Fi 7

A mesh option with multiple points to consider if you want to expand a wireless system.

Tri-band (2,4 GHz/5 GHz/6 GHz); Wi-Fi 7 (802.11be); two nodes according to the product information.

The product information says setup and management are handled through the Linksys app, and that the system can be expanded with compatible mesh devices.

Joybuy
TP-Link Deco X50-PoE 2-pack mesh Wi-Fi 6

TP-Link Deco X50-PoE (2-pack), dual-band Wi-Fi 6

A mesh set with two points for anyone with a suitable cable route who wants to use PoE power.

2-pack; dual-band (2,4 GHz/5 GHz); Wi-Fi 6 (802.11ax).

According to TP-Link, this model supports 802.3at and 802.3bt for PoE power, but not 802.3af. Check that your power supply supports the right standard.

Joybuy
TP-Link Deco XE75 Pro 3-pack tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

A mesh set with three points to extend Wi-Fi coverage to several areas of your home.

3-pack; tri-band (2,4 GHz/5 GHz/6 GHz); Wi-Fi 6E (802.11ax); three Ethernet ports per unit according to the product information.

Joybuy
TP-Link Deco XE75 3-pack tri-band Wi-Fi 6E

TP-Link Deco XE75 (3-pack), tri-band Wi-Fi 6E

A mesh set with three points to extend Wi-Fi coverage to several areas of your home.

3-pack; tri-band (2,4 GHz/5 GHz/6 GHz); Wi-Fi 6E (802.11ax); three Ethernet ports per unit according to the product information.

Joybuy

Frequently asked questions

What speed should I check at my streaming device for a 4K Netflix documentary?

Netflix recommends a stable connection of 15 Mbps or higher for UHD/4K, and 5 Mbps for 1080p. These are Netflix’s recommendations, not a guarantee for every streaming service or proof that you need a new router. If possible, also measure the connection at the device you use to watch.

How do I connect Deco points by cable behind my existing router?

TP-Link recommends setting up the points on the same Deco network first, then connecting them by Ethernet. In access point mode, TP-Link says a satellite point can be connected by cable to another Deco or to the main modem or router. Check in the app that Ethernet backhaul is active.

Do I need to replace my provider’s modem to use my own router or Wi-Fi point?

No, not necessarily. ACM ConsuWijzer explains that you’re free to choose your router and can continue using your provider’s equipment. If you want to replace the modem itself, check the connection and security requirements, and ask your provider for the settings you’ll need.

What can I do if a router I’ve bought breaks too soon?

According to ACM ConsuWijzer, your statutory rights sit alongside any manufacturer’s or retailer’s warranty. If a product doesn’t meet what you could reasonably expect when used normally, the retailer must offer an appropriate solution. In the Netherlands, your claim isn’t simply limited to a fixed two-year period.

What compliance information should I check for Wi-Fi equipment?

The Dutch Authority for Digital Infrastructure says that radio equipment placed on the market in the EU must meet the applicable requirements and then be given a CE marking by the manufacturer. Check the marking and product information for the specific model; a listing on a web shop alone doesn’t prove that the model meets all the requirements.