Who is this choice relevant to?

Someone with a study room at the far end of the home

Your Wi-Fi works near the router, but not very well where you study or work. The distance, walls and space available for an extra Wi-Fi point all affect your choice. The Dutch Consumers' Association advises you to consider where you place Wi-Fi boosters.

Film fan dealing with a stuttering picture

You want to know whether the connection is stable enough by your screen before replacing your router or considering a faster broadband package. The Dutch Consumers' Association recommends a wired speed test to assess your internet connection.

Someone who can’t run an Ethernet cable

You want coverage in your study room without having to run a cable, and need to weigh up whether a wireless node can be positioned effectively or powerline will work with your home’s electrical wiring. Devolo describes powerline as a way to carry your network to another room over your electrical wiring.

What should you consider when choosing?

First, find out whether the problem also occurs with a wired connection. Then choose a solution that suits the signal strength and cabling options in your home.

What to consider What should you check? Who is this important for?
Coverage in the study room Test the signal in the room and in any potential location for an intermediate node. Check whether extra Wi-Fi points can still connect from there. If you mainly work in a study room at the far end of your home and need coverage there, range is your priority; around 40% of consumers prioritise coverage in that room.
Stable streaming Test the connection by your screen. Netflix recommends a stable connection of at least 15 Mbps for one UHD 4K stream; this is not a router specification. If uninterrupted films are your priority, the connection by your television is what matters most; around 31% of consumers prioritise stable streaming.
Extending coverage without a cable Check whether a wireless mesh node can still get a good signal in an intermediate location. Powerline is an alternative you can test using the sockets in question. If you can’t run an Ethernet cable to your study room, you’ll want to extend coverage without installing one; around 15% of consumers prioritise this.
Overall cost of use Test your existing router first, then compare the number of devices you need, any cabling required and the electricity consumption. If you’d rather not replace equipment before you know what’s causing the problem, consider both the equipment you need and its running costs; around 14% of consumers prioritise keeping overall costs down.

Common buying mistakes

  • Upgrading to a faster broadband package before testing your Wi-Fi

    A slow Wi-Fi connection may be caused by the signal in your home. It doesn’t necessarily mean your provider’s broadband connection is too slow.

    First, run a speed test on a computer connected with an Ethernet cable, then test at the problem spot.

  • Placing a wireless mesh node somewhere the signal is already very weak

    The extra node also needs a usable connection to the rest of your network. Placing it in a room with poor reception won’t guarantee better coverage.

    Try an intermediate location. If you can run a cable, check whether the devices you’ve chosen support Ethernet backhaul.

  • Assuming the maximum Wi-Fi speed guarantees smooth film streaming

    A stated Wi-Fi speed doesn’t tell you how much stable bandwidth will be available by your screen.

    Check the connection where you watch and bear in mind the requirements of your streaming service.

  • Confusing a standard Deco X50 with a Deco X50-PoE

    TP-Link lists PoE and specific connection options for the X50-PoE. These aren’t automatically features of every X50 model.

    Check the full model name, hardware version, number of units and required power supply before choosing.

Brands to compare

TP-Link

The Deco X50 is a mesh option for multiple rooms. The separate X50-PoE range is designed for a different type of installation.

  • TP-Link says the standard Deco X50 supports Ethernet backhaul.
  • TP-Link lists PoE and two 2.5 Gbps ports for the X50-PoE V2. Check the hardware version of the model you’re considering; stated coverage isn’t a measurement of performance in your home.

ASUS

The RT-AX58U is a standalone Wi-Fi 6 router that can also be configured as an access point.

  • ASUS specifies four Gigabit LAN ports and, among other features, an access point mode for the RT-AX58U.
  • You’ll need compatible extra devices to extend coverage with mesh. The stated modes don’t guarantee coverage in a room at the far end of your home.

FRITZ!

The FRITZ!Repeater 3000 AX extends your network and can be used with an existing FRITZ!Box setup, among other options.

  • FRITZ! says the repeater can connect to a FRITZ!Box wirelessly or via LAN, and has two Gigabit LAN ports.
  • The repeater isn’t a replacement internet modem. FRITZ! mesh features require a compatible FRITZ! setup.

devolo

Magic 2 WiFi 6 next combines powerline networking through your plug sockets with Wi-Fi to extend coverage to another room.

  • The manufacturer lists two Gigabit ports on the Wi-Fi adapter.
  • Devolo’s speed and coverage claims aren’t a guarantee of performance with your home’s electrical wiring. Test it using the sockets you plan to use.

Joybuy products

This selection features TP-Link Deco mesh systems for extending Wi-Fi to multiple rooms. Placement still matters, especially when the connection between nodes is wireless.

TP-Link Deco X50 Wi-Fi 6 mesh system, 3-pack

TP-Link Deco X50 (3-pack)

A mesh system for extending Wi-Fi to multiple rooms. Where you place the nodes helps determine where they’ll work effectively.

Wi-Fi 6; dual-band (2,4 GHz/5 GHz); Ethernet backhaul supported, according to TP-Link.

View at Joybuy
TP-Link Deco XE75 Pro Wi-Fi 6E mesh system, 3-pack

TP-Link Deco XE75 Pro (3-pack)

A mesh system for extending coverage to multiple rooms. If you’re placing the nodes wirelessly, consider the signal strength at each location.

Tri-band Wi-Fi 6E (2,4 GHz/5 GHz/6 GHz).

View at Joybuy
TP-Link Deco XE75 mesh Wi-Fi 6E

TP-Link Deco XE75

A mesh option for extending Wi-Fi to other rooms. Make sure wireless nodes still have a connection to the network where you place them.

Mesh Wi-Fi 6E (2,4 GHz/5 GHz/6 GHz).

View at Joybuy
TP-Link Deco X50-PoE Wi-Fi 6 mesh system, 3-pack

TP-Link Deco X50-PoE (3-pack)

A mesh system for multiple rooms with PoE as a power option. Check in advance that this type of setup suits your planned placement.

Wi-Fi 6; dual-band (2,4 GHz/5 GHz); PoE; two Ethernet ports per unit.

View at Joybuy
TP-Link Deco X50 Wi-Fi 6 mesh system, 2-pack

TP-Link Deco X50 (2-pack)

A two-node mesh system for extending coverage to another room. Check that both nodes can be placed somewhere with a usable signal.

Wi-Fi 6; dual-band (2,4 GHz/5 GHz).

View at Joybuy

Frequently asked questions

Do I need a Wi-Fi 7 router to watch a nature documentary in 4K?

Not just for watching the film. Measure the stable connection by your screen: Netflix recommends at least 15 Mbps for one UHD 4K stream. That recommendation is about the stream, not a particular Wi-Fi version.

Where should I place an extra Wi-Fi point?

Place a wirelessly connected node somewhere it can still get a good signal from the main router, rather than simply putting it in the room with poor coverage. If you have an Ethernet cable available, check whether the devices you’ve chosen support Ethernet backhaul.

How can I tell whether the problem is with my provider’s connection or my Wi-Fi?

First, test using a computer connected to your home network with an Ethernet cable, then test again where you use your viewing device. If the wired connection is repeatedly much slower than promised, the Dutch Consumers' Association recommends contacting your provider.

Can I connect my own router in the Netherlands?

Yes. According to ACM ConsuWijzer, you’re free to choose your router. An own modem connected directly to the network must also meet additional network and security requirements. Your provider must supply the necessary settings and can refuse an insecure device.

Which marking should I check on network equipment?

Check the CE marking on the device itself. The Dutch Authority for Digital Infrastructure explains that this marking is required for equipment sold in the Netherlands. The product description alone doesn’t show which marking is on the item you receive.

What should I consider when it comes to the electricity use of a Wi-Fi extender?

Routers and extra Wi-Fi points are usually left on all the time and use electricity. Check how many nodes your setup needs, then compare their stated or independently measured power consumption.