Who is this for?

Watching a film on another floor

You want to know whether the connection at your TV or streaming stick is stable enough, and whether one extra Wi-Fi access point will do the job. Check the connection where you watch, not just next to the router.

Wi-Fi across all three floors

You want to improve coverage in several areas, so you’re comparing where mesh nodes could go and how they connect to one another.

A home with tricky wireless coverage

You’re looking for another option if floors make it difficult to get a wireless connection between the router and your viewing spot. Compare an Ethernet connection with powerline too, which sends the network signal through your home’s electrical wiring.

What should you look for in Wi-Fi for streaming?

What to consider What should you check? Who is this important for?
A stable stream Test the connection at your playback device and compare it with the connection by the router. Bear in mind that other devices may also be using the internet. If my main priority is watching a film without interruptions, I want to know whether the connection where I watch is good enough. Around 31% of consumers put stability first.
Coverage across multiple floors Identify the areas with problems and compare a single access point with several mesh nodes. Check whether the nodes can be placed where you need them and whether Ethernet backhaul is possible. If I need Wi-Fi on more than one floor, I don’t want to improve coverage only by the TV. Around 25% of consumers prioritise coverage throughout the home.
A connection without a long network cable Check whether powerline adapters provide a usable connection from the sockets you plan to use. Electrical appliances can affect transmission. If the wireless link between access points isn’t strong enough and running a network cable isn’t practical, I want to know whether the electrical wiring can provide an alternative network route. Around 13% of consumers need an alternative like this.
Connection to the TV Check whether Ethernet is available where you watch, and whether the port and mode on your chosen device work with that connection. For a fixed TV set-up, I mainly want to know whether I can connect the playback device by cable. Around 19% of consumers put the connection to the TV first.
No more equipment than you need Work out how many areas really need a stronger signal before comparing a single extender with a multi-node kit. If I first want to know whether one access point is enough, a smaller network set-up matters more than extra coverage I don’t need. Around 12% of consumers prioritise keeping their purchase to a minimum.

An advertised Wi-Fi speed isn’t the same as the speed you get at your TV. The Netflix Help Centre recommends at least 15 Mbps as a stable speed for one 4K UHD stream. This recommendation applies to that service and picture quality; it isn’t a performance guarantee for an extender or mesh system.

Buying pitfalls

  • Assuming the advertised Wi-Fi speed is the speed you’ll get at the TV

    A product’s stated speed doesn’t tell you how much speed will be left after the connection between floors.

    Test the connection where you watch and compare the result with a reading by the router. Use Netflix’s recommendation only for the service and picture quality it refers to.

  • Choosing a standalone extender for several problem areas

    An access point that helps in one viewing spot won’t automatically improve coverage across all three floors.

    Map the areas with weak coverage individually, then compare a standalone extender with a multi-node kit.

  • Assuming powerline is guaranteed to work

    Transmission can vary between sockets and may be affected by nearby electrical appliances.

    Test the adapters in the sockets you plan to use and check that the connection stays stable while streaming. Devolo recommends plugging adapters directly into wall sockets.

  • Assuming brand-specific mesh features are universally compatible

    Standard extender functionality isn’t the same as joining OneMesh or AiMesh.

    Check your exact router model and the required mesh compatibility before relying on these features.

Relevant brands

TP-Link

TP-Link offers both standalone Wi-Fi extenders and the Deco mesh range. The RE705X and Deco X50 are different types of network set-up, so choose according to the coverage and connections you need.

  • According to TP-Link, the RE705X has a gigabit port and access point mode. The Deco X50 supports optional Ethernet backhaul.
  • OneMesh roaming requires a compatible router. Stated coverage isn’t a measurement of performance in your home.

devolo

The Magic 2 WiFi 6 next combines powerline with Wi-Fi. According to devolo, the Multiroom Kit includes three adapters for use across multiple floors.

  • According to devolo, the Wi-Fi adapter has two gigabit ports.
  • Actual powerline performance depends in part on the sockets and electrical appliances. Devolo recommends testing the connection in the places where you plan to use it.

ASUS

The ASUS RP-AX58 is a standalone Wi-Fi 6 extender that can also be used with a compatible ASUS AiMesh router.

  • According to ASUS, the RP-AX58 works as an extender with many other routers.
  • AiMesh features require an AiMesh-compatible router. The stated maximum speed isn’t a measurement of performance on the floor where you watch.

Joybuy products

This selection includes powerline Wi-Fi, a standalone repeater and mesh kits for improving Wi-Fi in one or more areas of your home.

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT Powerline Starter Kit

An option if you want to carry your network to another floor through the electrical wiring and extend Wi-Fi there.

The product description lists IEEE 1901 and Wi-Fi 802.11ac. Test the connection using the sockets you plan to use.

View at Joybuy
TP-Link Deco M4 3-pack dual-band mesh Wi-Fi system

TP-Link Deco M4 3-Pack Dual-Band Wi-Fi 5

A mesh kit with several nodes to improve Wi-Fi in different areas of your home.

The product name lists dual-band 2.4 GHz/5 GHz and Wi-Fi 5 (802.11ac). The product description mentions three stations that work together and management through the Deco app.

View at Joybuy
TP-Link Deco X50 3-pack dual-band mesh Wi-Fi system

TP-Link Deco X50 3-Pack Dual-Band Wi-Fi 6

A mesh kit with three units for situations where you need Wi-Fi in several areas.

The product name lists dual-band 2.4 GHz/5 GHz and Wi-Fi 6 (802.11ax). According to the product description, each unit has three gigabit ports and optional Ethernet backhaul.

View at Joybuy
WiFi Repeater Pro Black

WiFi Repeater Pro Black

A standalone repeater for extending an existing Wi-Fi network. The connection to the router remains key to coverage where you watch.

The product description lists 2.4 GHz, two external aerials and a stated maximum of 300 Mbps. This maximum isn’t a measured speed on the floor where you watch.

View at Joybuy
TP-Link Deco XE75 Pro 3-pack tri-band mesh Wi-Fi system

TP-Link Deco XE75 Pro 3-Pack Tri-Band Wi-Fi 6E

A mesh kit with three units for extending Wi-Fi to several areas of your home.

The product name lists tri-band 2.4 GHz/5 GHz/6 GHz and Wi-Fi 6E (802.11ax). According to the product description, each unit has three gigabit ports.

View at Joybuy

Frequently asked questions

How can I tell whether a Wi-Fi booster will stop a film from buffering?

Measure the speed at your playback device and near the router. If the connection is already too slow there, adding another Wi-Fi access point won’t fix it. For one 4K UHD stream, the Netflix Help Centre recommends a stable speed of at least 15 Mbps. Other services and people using the connection at the same time may have different requirements.

Where should I put a wireless extender?

Place the extender somewhere it can still get a usable connection to the router, rather than where the signal has already dropped out. Then check the connection by the TV. The best position depends on the layout of your home.

How do I connect powerline adapters?

Test them in the wall sockets you plan to use and check the connection while streaming. Devolo recommends plugging adapters directly into wall sockets, not into a multi-socket extension or extension lead. Nearby electrical appliances can affect transmission.

What warranty applies to a Wi-Fi booster in the Netherlands?

There’s no fixed general statutory warranty period in the Netherlands: a product must meet what you could reasonably expect from it. If there’s a fault, contact the seller. A manufacturer’s warranty doesn’t replace your statutory rights.

Do I need a permit or registration for ordinary home Wi-Fi?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi can be used under the applicable conditions without a permit or any notification or registration requirement. This applies to ordinary Wi-Fi, not to a repeater for mobile phone signals. Radio equipment placed on the European market must also comply with the applicable equipment rules.