First, check your internet speed using an Ethernet cable, then test the Wi-Fi where you watch and in the study. A different router won’t fix a slow internet connection or poor router placement. If distance or walls are weakening the signal, an extra Wi-Fi access point may help. A wired connection is an option if you can run a cable, while with wireless mesh, the position of the extra point still matters. For Netflix in 4K, Netflix recommends a stable connection of at least 15 Mbps; this is not a required router speed.
Who is this choice relevant to?
Viewers with a distant study
If you need Wi-Fi both by your streaming device and in a room further away, consider where to place an extra access point in relation to the distance and obstacles. The Consumentenbond explains how distance and walls affect the signal.
Viewers looking to fix buffering
If you first want to find out whether your internet connection or Wi-Fi is limiting your stream, compare the speed over a wired connection with the speed where you watch. The Netflix Help Centre publishes speed recommendations for its streams; the Consumentenbond explains the factors that affect Wi-Fi signals.
Households with a provider-supplied device
If you want to extend your Wi-Fi without replacing your provider’s device straight away, check how an extra access point can connect to your existing router. ACM ConsuWijzer explains your freedom to choose your own equipment and what to consider when replacing a modem.
What should you look for when buying?
Move the router or check its settings
Choose this if: the connection works well over an Ethernet cable, but the router is poorly positioned, for example behind obstacles.
Bear in mind: moving it may require a longer cable and won’t solve every connection problem in a distant room.
Wired access point or mesh
Choose this if: you can run an Ethernet cable to or near the study and need an extra Wi-Fi access point there.
Bear in mind: check the cable route, available ports and connection to your provider’s device.
Wireless mesh system
Choose this if: running a cable to the study isn’t practical and there’s still a usable Wi-Fi signal somewhere in between.
Bear in mind: the extra point needs to maintain a usable wireless connection to the first point.
| What to consider |
What should you check? |
Who is this important to? |
| Coverage in the study |
Consider where an extra point could go and whether the system supports a wired or wireless connection between points. |
If I need a usable connection in the study, I’ll consider where to place the extra Wi-Fi access point and what obstacles are in the way. Around 36% of consumers prioritise coverage in that room. |
| Reliable streaming |
Test the connection over a cable, then on your streaming device; compare the result with the requirements of the streaming service you use. |
If you want to tackle buffering, first find out whether your internet connection or Wi-Fi is the limiting factor. Around 29% of consumers prioritise reliable streaming. |
| Connection to your home network |
Decide whether you’re adding Wi-Fi or replacing the modem too; if replacing it, check the connection type and your provider’s requirements. |
If I want to keep my existing provider-supplied device, the extra Wi-Fi solution needs to connect to it. Around 21% of consumers prioritise this. |
| Overall setup and management |
Work out how many access points and any cabling you’ll need, and check whether updates are available and the product has CE marking. |
If you want to understand the complete setup and what maintaining it involves, look beyond just the main router. Around 14% of consumers prioritise the overall cost and management. |
Common pitfalls
-
Confusing a high Wi-Fi speed with coverage in the study
Distance and obstacles can weaken the signal where you watch, regardless of the router’s advertised speed.
Test the connection where you watch and assess the whole setup, not just the main router.
-
Placing a wireless mesh point where the original signal is already almost gone
The extra point needs a usable connection to the first point.
Try a midway position with fewer obstacles, or check whether a wired connection is possible. The Consumentenbond recommends placing a Wi-Fi extender nearer the middle of the home if coverage is weak at the back.
-
Confusing an extra router with a replacement fibre modem
Adding a Wi-Fi access point and connecting a modem directly to your provider’s line are two different setups. ACM ConsuWijzer notes that modems for PTP and PON fibre connections are not interchangeable.
First decide whether you’re just extending Wi-Fi or replacing the modem too. If replacing it, check the connection type and your provider’s requirements.
Brands to consider
TP-Link
The Deco X50 range offers Wi-Fi 6 mesh with one, two or three points. TP-Link also lists Ethernet backhaul as an option.
- TP-Link lists three Gigabit ports and a range of up to 418 m² for the two-pack.
- The stated range is a manufacturer’s claim, not a guarantee of coverage in a study behind walls. Check which pack you’re choosing.
ASUS
The ZenWiFi XD5 is a Wi-Fi 6 mesh option for households that may want to connect the points using a cable.
- ASUS confirms Ethernet backhaul and the option to use one network name or separate names for each frequency band.
- The higher Wi-Fi 6 speeds quoted by ASUS require compatible devices.
FRITZ!
According to FRITZ!, the Mesh Set 4200 consists of two FRITZ!Repeaters 3000 AX, which can each be connected via LAN to an existing router or compatible fibre modem/ONT.
- FRITZ! lists Wi-Fi 6, one Gigabit LAN port per point and a five-year manufacturer’s warranty.
- This is a two-point set and is not automatically a replacement for every type of provider modem. Check that it suits your planned connection.
Google
Nest Wifi Pro is a mesh option with a wired connection option documented by Google.
- Google confirms Ethernet backhaul for Nest Wifi Pro.
- Google states that Nest Wifi Pro points cannot form a single mesh network with older Nest Wifi or Google Wifi points.
NETGEAR
NETGEAR describes the Orbi RBK352 as a Wi-Fi 6 two-pack with a separate router and satellite.
- NETGEAR identifies the components as the RBR350 router and RBS350 satellite, and provides support materials and firmware downloads.
- The pack description and support information alone say nothing about coverage or streaming performance in your home.
Joybuy products for adding Wi-Fi access points at home
These mesh systems are for anyone looking to extend Wi-Fi to several areas of their home. Check which connection and setup suit your home for each model.
No image available
TP-Link AX1800 Whole Home Mesh Wi-Fi 6, 2-pack
A mesh set with two points for extending Wi-Fi to several areas; the product name specifies Wi-Fi 6.
The product name specifies AX1800 and a two-pack.
View at Joybuy
No image available
TP-Link Deco X50, 3-pack
A mesh set with three points for Wi-Fi in several areas; check where the points can go in your home.
The product name specifies dual-band, 2.4 GHz and 5 GHz, and Wi-Fi 6.
View at Joybuy
No image available
TP-Link Deco X50-PoE, 2-pack
This mesh set with two points is an option for extending Wi-Fi; check whether PoE suits your planned setup.
The product name specifies dual-band and Wi-Fi 6.
View at Joybuy
No image available
TP-Link Deco XE75
A mesh option for households with devices that support the stated Wi-Fi standard; check that your equipment is compatible.
The product name specifies tri-band Wi-Fi 6E with 2.4 GHz, 5 GHz and 6 GHz.
View at Joybuy
No image available
TP-Link Deco X50, 2-pack
A mesh set with two points for extending Wi-Fi; check that the positioning of both points works for the distance to the study.
The product name specifies dual-band, 2.4 GHz and 5 GHz, and Wi-Fi 6.
View at Joybuy
Frequently asked questions
Should I replace my internet package or my router first?
Not necessarily. First, test your connection using a computer connected with an Ethernet cable, then compare the result with a test where you watch. This can help you work out whether your internet connection or your home Wi-Fi needs attention.
Where should I put an extra wireless Wi-Fi access point?
Don’t put it right where the original signal has almost disappeared. If coverage is weak at the back of the home, the Consumentenbond recommends placing an access point nearer the middle, with as few obstacles as possible between the points.
Can I use my own router in the Netherlands?
Yes. ACM ConsuWijzer confirms that you can choose your own router. If you replace the modem, you’ll also need to check the required settings and whether it’s compatible with your connection network.
What should I look for when it comes to security and maintenance?
Keep your router up to date and check that applicable radio equipment has the required CE marking when you buy it. The Rijksinspectie Digitale Infrastructuur explains the European requirements for radio equipment sold in the Netherlands.
Will a faster Wi-Fi standard automatically give you a sharper documentary?
No. For Netflix in 4K, Netflix recommends a stable internet speed of at least 15 Mbps; the picture quality you get also depends on other factors. So test on your streaming device rather than relying only on the advertised Wi-Fi speed.