Who is this advice for?

Watching on multiple floors

You want to watch a live concert in different parts of your home. Test those locations to work out where you need extra Wi-Fi access points.

Live streamers

You’re streaming concert footage yourself. As well as Wi-Fi coverage, consider your upload connection, encoder settings and a test stream.

Using an existing router from your provider

You want to improve coverage on a floor where the signal is weak, without replacing your internet connection unnecessarily. A wired Wi-Fi access point or access point mode could be an option.

What should you look for when buying?

Existing router with a wired access point

Choose this if: your router and internet connection work well, but coverage is poor on one floor and you can run a network cable there.

Bear in mind: you’ll need a cable, a connection point and possibly a power supply for the access point.

Mesh with Ethernet backhaul

Choose this if: you want to place Wi-Fi access points on different floors and can connect them to each other by cable.

Bear in mind: the connection sequence varies by model, as does the choice between router and access point mode.

Wireless mesh

Choose this if: running cables isn’t practical and you can position the access points so they have a strong wireless connection to each other.

Bear in mind: placement and obstacles matter; a stated coverage area doesn’t guarantee a signal through your floors.

Replace only the router

Choose this if: your tests show that the router itself is the bottleneck in the places where you watch the concert.

Bear in mind: one new router won’t automatically add a Wi-Fi access point on another floor. Also check your provider’s connection and settings.

What to consider What should you check? Who is this important for?
Coverage on every floor you use Test the places where you watch and check how many Wi-Fi access points the system includes and how they connect to each other. If I watch on different floors, I want to know whether there’s enough coverage in every spot. Around 31% of consumers say coverage on each floor is their main buying priority.
Connection between Wi-Fi access points Check for Ethernet backhaul support, the ports you’ll need and the recommended connection sequence. For a live concert, I also want to consider the connection between the access points, not just coverage where I watch. Around 25% of consumers prioritise uninterrupted live viewing.
Upload speed for streaming your own footage Test your upload connection, check your platform’s encoder settings and run a test stream with similar video and audio. If I’m streaming concert footage myself, I want to know whether my upload connection can support my encoder settings. Around 19% of consumers give their own live streams top priority.
Compatibility with your existing network Check the router or access point mode, connection to your provider’s router, what’s included in the box and whether updates are supported. I want to keep using my existing network if possible and know in advance what I’ll need for installation. Around 25% of consumers prioritise reusing existing equipment and installation costs.

Common buying mistakes

  • Assuming a stated coverage area guarantees a signal on every floor

    The actual connection also depends on your floors and where you place the Wi-Fi access points. A manufacturer’s coverage claim won’t automatically predict the signal in your building.

    Test the places where you watch or stream, and check the connection between the access points too.

    Depending on your test results, you may still need an extra Wi-Fi access point or network cable.

  • Confusing a higher Wi-Fi speed class with a faster internet connection

    Your local Wi-Fi connection, internet connection and upload speed for streaming are separate links in the chain. A new router won’t increase the speed of your broadband package.

    Test the connection in every relevant location. If you’re streaming yourself, check your upload speed and encoder settings too.

  • Comparing only the system and forgetting about installation

    Wired access points and mesh with Ethernet backhaul need different connections from wireless mesh.

    Before buying, check what’s included in the box, which ports are available and how you’ll route the cables.

    Depending on your setup, you may need network cables, an extra Wi-Fi access point, a power supply or a compatible switch.

Brands to consider

TP-Link

Deco mesh is an option if you’re looking for multiple Wi-Fi access points. The Dutch Deco X50 page describes a version with three access points, dual-band Wi-Fi 6 and gigabit ports.

  • TP-Link describes Ethernet backhaul and access point mode for Deco.
  • The stated coverage is a manufacturer’s claim, not a measurement in your building. Check the exact version and what’s included in the box.

ASUS

AiMesh and ZenWiFi are options if you’re considering a configurable system with wired connections between access points.

  • ASUS describes Ethernet backhaul via a switch, along with router and access point modes.
  • Check the number of switch ports you’ll need and the settings. The installation instructions don’t prove how every ASUS model performs.

NETGEAR

Orbi includes mesh systems in different configurations and sizes, including sets with two or three access points.

  • The different system sizes give you options to compare with the number of locations you want to cover.
  • Manufacturer claims about speed and coverage area don’t guarantee a concert stream through the floors in your building.

FRITZ!

A FRITZ!Repeater with a LAN connection could be suitable if you already use a compatible FRITZ!Box and want to add Wi-Fi on another floor.

  • FRITZ! describes the FRITZ!Repeater 3000 AX as an additional access point connected via LAN.
  • In this setup, the repeater extends your network; it doesn’t independently replace a modem or router.

Ubiquiti

UniFi access points are an alternative if you want to position Wi-Fi access points with wired connections and manage the network yourself.

  • The manufacturer describes access points with Ethernet and PoE connections, as well as network management features.
  • Check the power requirements and other network equipment needed for each model. Specifications don’t guarantee performance in your location.

Joybuy products

This selection includes TP-Link Deco mesh systems with two or three access points. Compare the number of access points and the stated connection options with your test results and the cables you can use.

TP-Link Deco E4 mesh system, 3-pack

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

The three mesh units are designed to provide Wi-Fi in different locations.

Dual-band 2.4 GHz and 5 GHz, Wi-Fi 5 (802.11ac) and three Ethernet ports per unit.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

This set of three mesh units is an option if you want Wi-Fi in multiple locations and are considering Ethernet backhaul.

Dual-band 2.4 GHz and 5 GHz, Wi-Fi 6 (802.11ax), three gigabit ports per unit and optional Ethernet backhaul.

View at Joybuy
TP-Link Deco XE75 Pro mesh system, 3-pack

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

The three mesh units give you multiple placement options; use your test results to work out where they’re needed in your building.

Tri-band Wi-Fi 6E (802.11ax), with 2.4GHz, 5GHz and 6GHz bands and three Ethernet ports per unit.

View at Joybuy
TP-Link Deco X50-PoE mesh system, 3-pack

TP-Link Deco X50-PoE (3-pack), dual-band Wi-Fi 6

This three-unit mesh system is an option if you want to set up multiple Wi-Fi access points and can use PoE in your installation.

Dual-band 2.4 GHz and 5 GHz, Wi-Fi 6 (802.11ax), PoE support and two Ethernet ports per unit.

View at Joybuy
TP-Link Deco X50 mesh system, 2-pack

TP-Link Deco X50 (2-pack), dual-band Wi-Fi 6

The two mesh units are an option if your test results show you need two placement points and you’re considering Ethernet backhaul.

Dual-band 2.4 GHz and 5 GHz, Wi-Fi 6 (802.11ax), three Ethernet ports per unit and optional Ethernet backhaul.

View at Joybuy

Frequently asked questions

Should I buy one more powerful router for a live concert across multiple floors?

Not necessarily. First, test where the signal or connection is weak. Wi-Fi access points in suitable locations are a different solution from simply replacing the central router.

What changes if I stream the concert myself instead of just watching?

You should also test your upload connection and your encoder’s bitrate. YouTube Help recommends testing your upload and running a test stream with video and audio similar to your broadcast. The settings depend on the platform you use.

Can a mesh system work with my provider’s router?

That depends on the system and the mode you choose. TP-Link describes an access point mode for Deco, with a different connection method from router mode. Follow the instructions for your model and check the network layout before installation.

Can I use my own router in the Netherlands?

Yes. According to ACM ConsuWijzer, you have the right to choose your own router in the Netherlands. A provider may refuse a device that isn’t secure; connecting your own modem directly may require specific network settings and compatibility conditions.

What maintenance does your own Wi-Fi system need?

Check whether firmware updates are available, install them and change the default login details. This is security advice; it doesn’t indicate how long a particular model will receive updates.