Who is this relevant to?

Video caller on a busy network

Your calls mainly stutter when other people in your household are streaming, downloading or uploading at the same time. You want to know whether traffic prioritisation could help. Zoom outlines bandwidth requirements for group calls, while ASUS lists Adaptive QoS as a setting on the RT-AX58U.

Video caller outside Wi-Fi range

You take calls in a room where distance, walls or another floor weaken the signal. The Consumentenbond recommends placing boosters where you want to improve the signal. You can compare adding a Wi-Fi point or mesh system with moving your existing router.

Resident sharing a provider connection

You want to work out whether the connection or the Wi-Fi is the problem, and find out who can configure and update the router. ACM ConsuWijzer explains that you can choose your own router, while VeiligInternetten offers advice on router updates.

What should you look for when choosing?

A single router with traffic prioritisation

Best suited to: when you have adequate Wi-Fi coverage where you hold your meetings, but other people in your household use a lot of data at the same time.

Bear in mind: prioritisation allocates the available capacity, but it does not increase your broadband package speed or fix a weak signal.

Mesh with multiple Wi-Fi points

Best suited to: when the signal is weak mainly in a room behind walls or on another floor, and you can place an extra point there.

Bear in mind: extra points need a suitable location and a power supply; connecting them by cable may require additional wiring.

Wired meetings with your existing router

Best suited to: when you can run a network cable to your laptop, or want to test first whether the provider connection itself is the problem.

Bear in mind: a cable limits where you can sit, but it could save you buying a router if Wi-Fi is not the cause.

What to consider What should you check? Who is this important for?
Calls when the network is busy Test using Ethernet while others are online, and check whether the exact model offers configurable QoS for uploads and downloads. If other people in your household stream or send files while you are on a call, you’ll want to know whether prioritisation is right for your issue. Around 36% of consumers prioritise simultaneous network use.
Wi-Fi where you hold meetings Compare the connection near the router with the one in your meeting room. Consider where an extra point could go and whether you can connect it by cable. If walls or distance weaken the signal in your room, coverage is the main concern. Around 29% of consumers prioritise coverage.
Connection or cabling Test the connection using a network cable and, if needed, ask your provider which settings are required for your own equipment. If you first want to find out whether the provider connection is the problem, or you can hold meetings using a wired connection, you’ll want to distinguish this from Wi-Fi issues. Around 21% of consumers prioritise the connection or cabling.
Management and costs Check update support, configuration requirements, features and warranty terms separately. If you need to configure and maintain the router yourself, you’ll want to know how much that involves. Management or costs are the main concern for around 14% of consumers.

Common buying mistakes

  • Assuming the highest Wi-Fi speed on the box guarantees better video calls

    A slow wired connection or poorly placed Wi-Fi point will not automatically improve just because you buy a router with a higher stated speed.

    Test using Ethernet first, then test where you hold your meetings. This will help you work out whether the connection, coverage or simultaneous use needs attention.

  • Buying mesh without planning where to put the points

    An extra point only helps if you can place it somewhere useful. A mesh label or stated maximum range does not tell you how the signal will perform in your room.

    Decide in advance where each point will go and whether you can run a cable between them.

  • Confusing a router used behind a modem with a modem replacement

    According to FRITZ!, the FRITZ!Box 4050 is designed to be used behind an existing DSL, cable or fibre-optic modem.

    Before buying, establish whether you’ll keep your existing modem and, if needed, ask your provider which connection details you’ll need.

  • Treating the manufacturer’s warranty and security updates as the same thing

    A warranty period does not automatically tell you who installs firmware updates or how long updates will be available.

    Check update support separately from the warranty terms.

Brands to consider

ASUS

The RT-AX58U is worth considering if you’re looking for configurable traffic prioritisation.

  • ASUS lists Adaptive QoS and a guest network for the RT-AX58U.
  • The feature does not guarantee an improvement in a particular shared home. Check the exact model version and test the setting in your own situation.

TP-Link

The Archer AX55 is a standalone Wi-Fi router, while the Deco X50 is a mesh range with multiple Wi-Fi points.

  • TP-Link lists OFDMA for the Archer AX55 and optional Ethernet backhaul for the Deco X50.
  • Manufacturer claims about capacity and coverage are not measurements taken in your home. Check the model, version and number of points.

FRITZ!

The FRITZ!Box 4050 is designed to be used as a router behind an existing DSL, cable or fibre-optic modem.

  • FRITZ! lists automatic updates, three Gigabit LAN ports and a five-year manufacturer’s warranty for the 4050.
  • This model cannot replace every type of modem on its own. Check that the setup you have in mind is compatible with your connection.

Joybuy product picks

These Joybuy picks include mesh systems with extra Wi-Fi points and one standalone router for a home network. For a specific product, also check the version intended for the Dutch market and the applicable requirements for radio equipment.

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5 (802.11ac)

A mesh system with three units for using Wi-Fi in multiple rooms.

Dual-band: 2.4 GHz and 5 GHz. The Ethernet ports are rated for speeds of up to 100 Mbps, so bear this in mind if you need a wired connection faster than that.

View at Joybuy
ASUS ZenWiFi BD4, dual-band Wi-Fi 7

ASUS ZenWiFi BD4, dual-band Wi-Fi 7 (802.11be)

A mesh system for using Wi-Fi in multiple areas of your home.

Dual-band: 2.4 GHz and 5 GHz. The product information mentions a wired backhaul option. Check that the setup and cabling required are suitable for your home.

View at Joybuy
TP-Link Deco M4 (3-pack), dual-band Wi-Fi 5

TP-Link Deco M4 (3-pack), dual-band Wi-Fi 5 (802.11ac)

A mesh system with three units for anyone who wants to use Wi-Fi in different rooms.

Dual-band: 2.4 GHz and 5 GHz. The product information mentions roaming between Deco units, with setup and management via the Deco app.

View at Joybuy
ASUS RT-AX52 AX1800 AiMesh router with Gigabit Ethernet

ASUS RT-AX52 AX1800 AiMesh router, dual-band, Gigabit Ethernet

A standalone router to consider if one Wi-Fi point is enough and you can connect your laptop by cable if needed.

Dual-band: 2.4 GHz and 5 GHz. The product name specifies Gigabit Ethernet.

View at Joybuy
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6 (802.11ax)

A mesh system with three units for using Wi-Fi in multiple areas of your home.

Dual-band: 2.4 GHz and 5 GHz. The product information lists optional Ethernet backhaul as a way to connect mesh points by cable.

View at Joybuy

Frequently asked questions

Should you get a faster router or a faster broadband package first?

Neither is necessarily the answer. First, use a network cable to test whether the connection itself is the problem, then compare the result with Wi-Fi where you hold your meetings. Zoom’s published bandwidth figures for video calls are requirements for using the service, not proof that a particular router speed will improve your calls.

Can you use your own router in the Netherlands instead of your provider’s?

Yes. ACM ConsuWijzer says that you can choose your own router in the Netherlands. If you connect your own device directly to the provider’s network, you may need settings from your provider. Using a standalone router behind an existing modem is a different setup, so check what type of connection you have.

How can you keep your own router secure?

Install security updates and enable automatic updates if the model offers them. ACM ConsuWijzer stresses that you should keep your own device up to date, while VeiligInternetten provides practical instructions for installing updates.

What product requirements apply to a Wi-Fi router sold in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, applicable radio equipment must comply with the Radio Equipment Directive and, when compliant, carry the CE mark. Applicable digital security requirements have also applied since 1 August 2025. Check the version intended for the Dutch market and the accompanying product information. A product listing on its own does not confirm that the version supplied meets the requirements.

Does a two-year manufacturer’s warranty mean your rights end after that?

No. ACM ConsuWijzer distinguishes between a manufacturer’s or seller’s warranty and your statutory rights. In the Netherlands, there is no fixed two-year time limit for the latter. What you could reasonably expect in terms of lifespan, and whether the product has been used normally, are relevant. For statutory rights, contact the seller.