Who is this relevant for?

Watching and working from home at the same time

You want to play back a recording while someone else uses the same connection for something like a video call. Check the connection on both devices while they’re in use at the same time.

Using two separate rooms

Your viewing and work areas are in different places, and the signal is weak in at least one of them. In that case, where you place your access points may matter more than the advertised Wi-Fi speed alone.

Sharing a work network

You share your workspace or home network with others and want to consider guest access, management and updates when choosing a router.

What should you look for when choosing?

One Wi-Fi router

A good fit if: your viewing and work areas already have adequate coverage and you’re looking for a standalone router.

Trade-off: a single device won’t necessarily fix a weak signal behind walls or on another floor.

Mesh system with multiple nodes

A good fit if: your viewing and work areas are in different rooms where the current signal is weak.

Trade-off: you’ll need to position multiple devices. Also check whether ethernet backhaul will work with your cabling options.

A wired access point

A good fit if: your existing modem handles the connection and router functions well, but Wi-Fi coverage falls short elsewhere.

Trade-off: you’ll need a suitable cable route and the right operating mode.

What to consider What to look for Who is this important for?
Watching and working at the same time Check the connection in both places and compare it with the requirements of the services you use. Netflix recommends 5 Mbps for FHD 1080p and 15 Mbps for UHD 4K on Netflix. If I want to watch something and make a video call at the same time, I want to know whether both devices will stay connected. Around 33% of consumers rank stability during simultaneous use as their top priority.
Coverage in different rooms Map out where the signal is weak, then check how many access points you need and whether a cable connection between them is possible. If my viewing and work areas are separate, I want coverage in both places. Around 27% of consumers prioritise coverage in separate rooms.
Network separation and management Check guest network support and update support for the exact model. ACM ConsuWijzer highlights the importance of updates for network security and personal data. If I share my network with others, I want to be able to tailor access and management to my needs. Around 20% of consumers rank managing a shared network as their top priority.
Existing equipment and connection Decide whether you want to keep your provider’s modem, and check the router’s required connection and operating mode. If my existing modem does the job, I don’t want to replace equipment unnecessarily. Around 20% of consumers prioritise a suitable connection with as little replacement as possible.

Common buying mistakes

  • Assuming the highest AX speed guarantees streaming speed

    An advertised wireless speed doesn’t tell you what connection will reach your viewing area or what your broadband connection can deliver when someone else is online too.

    Check the connection in your viewing and work areas and compare it with the requirements of the streaming service you use. Netflix’s speed recommendations are only an example for Netflix.

  • Buying a mesh system when the broadband connection is the only issue

    Mesh can extend Wi-Fi to other areas, but it won’t increase the speed supplied by your provider.

    First, establish where the connection is falling short and whether you can keep your existing modem.

  • Assuming similar model names mean the same specification

    Revisions, box contents and PoE support can vary between versions. The model name or AX class alone won’t tell you what the differences are.

    Before buying, check the full model name, hardware version and what’s included in the box.

Brands to consider

TP-Link

The Archer AX55 is a standalone router, while the Deco X50 is a mesh solution. So, start by comparing which type you need.

  • TP-Link says the Archer AX55 has Wi-Fi 6 and gigabit ports. The Deco X50 comes with multiple nodes and supports optional ethernet backhaul.
  • Advertised wireless speeds and coverage are manufacturer specifications, not measurements taken in your home.

ASUS

The RT-AX58U is one model to compare for router features on a shared network.

  • ASUS lists features including a guest network, Adaptive QoS and gigabit ports.
  • Specifications differ between revisions V1 and V2. Check which revision is being sold, and don’t assume that features or performance apply to both.

FRITZ!

According to FRITZ!, the FRITZ!Box 4060 is a standalone tri-band Wi-Fi 6 router for use with a modem.

  • FRITZ! lists a 2.5-gigabit WAN connection and three gigabit LAN ports.
  • The model also has telephony and smart home features. Compare these with your needs if you’re mainly looking for a solution for watching and working.

Wi-Fi routers and mesh systems at Joybuy

This selection includes standalone routers for areas with good coverage and mesh systems for viewing and work areas that are further apart.

ASUS RT-AX52 AX1800 dual-band router

ASUS RT-AX52 AX1800

A standalone router to compare if you want to provide Wi-Fi in the areas where you use your devices.

Dual-band (2,4 GHz / 5 GHz), Gigabit Ethernet and AiMesh compatibility.

The product description mentions OFDMA and MU-MIMO for use with multiple devices.

View at Joybuy
Three-pack TP-Link Deco X50 mesh system

TP-Link Deco X50 (3-pack)

A mesh system for situations where your viewing and work areas are in different rooms.

Three units; dual-band (2,4 GHz / 5 GHz) and Wi-Fi 6 (802.11ax).

The product description lists gigabit ports on each unit and optional ethernet backhaul.

View at Joybuy
ASUS RT-AX52 Pro AX3000 dual-band router

ASUS RT-AX52 Pro AX3000

A standalone router to compare if you use multiple devices on your network.

Dual-band (2,4 GHz / 5 GHz), Gigabit Ethernet and AiMesh compatibility.

The product description mentions support for OFDMA and MU-MIMO.

View at Joybuy
TP-Link Deco XE75 mesh system with three units

TP-Link Deco XE75 (3 units)

A mesh system to compare if your viewing and work areas are in different places.

Tri-band (2,4 GHz / 5 GHz / 6 GHz) and Wi-Fi 6E (802.11ax).

The product description lists guest access, QoS and gigabit ports on each unit.

View at Joybuy
Three-pack TP-Link Deco X50-PoE mesh system

TP-Link Deco X50-PoE (3-pack)

A mesh system to compare if you want to position multiple nodes and need PoE support.

Three units; dual-band (2,4 GHz / 5 GHz) and Wi-Fi 6 (802.11ax).

The product description lists Power over Ethernet, two ethernet ports on each unit and QoS.

View at Joybuy

Frequently asked questions

How can you tell whether buffering is caused by Wi-Fi or your internet connection?

Check the connection in your viewing and work areas, including while both are in use at the same time. Netflix describes a network test on the playback device and recommends contacting your provider if the speed is lower than expected. Another streaming service may have different requirements.

Does your own router have to replace your provider’s modem?

No, you can also use a router alongside an existing modem. Check the connection and settings first. ACM ConsuWijzer states that, under certain conditions, you can choose your own device in the Netherlands and that your provider must give you the necessary settings.

What maintenance does your own router need?

Keep the firmware up to date. ACM ConsuWijzer says updates are important for protecting your network and personal data.

Is the statutory warranty in the Netherlands automatically exactly two years?

No. ACM ConsuWijzer explains that the law doesn’t set a fixed period for the statutory warranty. What matters is how long you can reasonably expect the product to last with normal use. Any manufacturer’s warranty is separate.