Project group working across several rooms
If you switch between the shared workspace and adjoining rooms, check the signal in every area where people will be working on the project.
For a single workspace with good signal, a standalone Wi-Fi router may be enough. If people work in several rooms and the signal is weak there, a mesh system is likely to be a better fit. Also check that your internet connection and number of ports can support everyone working on projects at the same time. Separately, find out how guest access works and how the router connects to your existing modem.
If you switch between the shared workspace and adjoining rooms, check the signal in every area where people will be working on the project.
When several people use laptops and phones for meetings and project work at the same time, both the router setup and the performance of your existing internet connection matter.
If different people will be connecting, check whether you can keep guests separate from your private network, and which local devices they may need to use.
Start by checking the signal in the areas where the group will work. Then consider whether one router will be enough or whether you need additional mesh points. Finally, check support for simultaneous use, guest access and wired connections.
| What to consider | What should you check? | Who should consider this? |
|---|---|---|
| Coverage in work areas | Check the signal in every room you use and compare a single router with a system that has several mesh points. A coverage claim for a 3-pack does not automatically apply to a different pack size. | If I work in different rooms, I want to know whether the connection will be good enough in each workspace before choosing a setup. Around 37% of shoppers prioritise coverage in all the areas they use. |
| Simultaneous use | First, find out whether dropouts are caused by the Wi-Fi or by your existing internet connection. Don’t assume a stated Mbps figure reflects the speed you’ll get in the workspace. | When several people are in online meetings and sharing files at the same time, I want to know where the bottleneck is. Around 27% of shoppers prioritise simultaneous use. |
| Guest access | Check which types of access the guest network restricts on the exact model. Also consider whether people need to use a printer or local storage; ASUS describes this restriction for the RT-AX58U. | If different people will be connecting, I want to weigh up internet access against access to the private network and local devices. Around 18% of shoppers give separate guest access top priority. |
| Wired devices | Count how many LAN ports you need and distinguish LAN from WAN. Also check whether the router can connect to your existing modem or network connection point. | If project equipment stays in one place, I want to know in advance how many devices can be connected by cable. Around 18% of shoppers prioritise wired connections. |
TP-Link specifically applies its claim of up to 604 m² for the Deco X50 to the 3-pack. This claim doesn’t tell you what coverage a different pack size will provide in your workspace.
Compare the exact pack variant and check the signal in the work areas you plan to use.
If the setup doesn’t provide enough coverage, you may need an additional Wi-Fi point.
Stated Wi-Fi speeds aren’t measurements taken through walls or in the area where your group will work. Your existing internet connection also plays a part.
First find out where the bottleneck is, then compare the product specifications.
A guest network can restrict access to the local network, which matters if people need to use a printer or local storage.
Before installation, decide whether guests only need internet access or also need to reach local devices, and check the settings on the exact model.
The Archer AX55 is a standalone Wi-Fi 6 router, while the Deco X50 is an expandable mesh system for workspaces across several rooms.
The RT-AX58U is worth considering if guest access and the option to expand with AiMesh are important to you.
The FRITZ!Box 4060 is designed to connect behind existing modem equipment and has separate WAN and LAN ports.
This selection includes standalone routers and mesh models for a shared workspace. When buying, check that the specific radio equipment has the required CE marking; the model name alone doesn’t confirm this.
No image available
An option to consider if you’re choosing a single router; check that its ports are suitable for the equipment in your workspace.
The product name lists dual-band (2,4 GHz / 5 GHz), AiMesh and Gigabit Ethernet.
No image available
A model to consider if you’re looking for a Wi-Fi 7 mesh system; check which units are included in the version you choose.
The product name lists dual-band Wi-Fi 7.
No image available
A standalone router to compare if you use several devices at the same time; check that its ports and network features suit your setup.
The product name lists dual-band (2,4 GHz / 5 GHz), Wi-Fi 6, AiMesh and Gigabit Ethernet.
No image available
A mesh model to consider if people work in different rooms; check the version you choose and where the Wi-Fi points can be placed.
The product name lists tri-band (2,4 GHz / 5 GHz / 6 GHz), mesh and Wi-Fi 6E.
No image available
A mesh system to compare if you work in several areas; check that the planned installation and connections suit your workspace.
The product name lists Wi-Fi 6, PoE, dual-band (2,4 GHz / 5 GHz) and two Ethernet ports.
No, that isn’t always necessary. ACM ConsuWijzer explains that you can choose your own router, but you may need settings from your provider to connect it. Check which functions your existing device will still handle and, if necessary, ask your provider for the connection details.
Check the update function on the exact model and enable automatic updates if available. VeiligInternetten advises keeping routers up to date because of security risks.
That depends on the guest network’s access permissions. Check whether people only need internet access or also need to use local devices; a guest network can restrict access to the local network.
Radio equipment placed on the market in the Netherlands must meet the applicable European requirements and carry the required CE marking. The Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) states that CE marking is mandatory on equipment. So check the specific item rather than assuming it has the marking based on the model name alone.