Photographer with slow uploads
If you send a lot of photos, you’ll want to find out first whether your internet connection or Wi-Fi is limiting your upload speed. The Consumentenbond explains that upload speed matters when sending photos and videos.
First, measure your upload speed using a network cable, then compare it with Wi-Fi where you send your photos: a different router won’t fix a limitation with your internet connection. If Wi-Fi is the bottleneck, choose based on the space available on your shelf and the coverage you need. One compact router may be enough if the signal is good, while extra mesh units are an option if the signal is weak where you upload. Also check the connection type and the EU requirements that apply to the exact model.
If you send a lot of photos, you’ll want to find out first whether your internet connection or Wi-Fi is limiting your upload speed. The Consumentenbond explains that upload speed matters when sending photos and videos.
If you have little space for a router, cables and an adapter, you’ll want a setup that fits without placing the device somewhere that could limit Wi-Fi coverage. The Consumentenbond points out that walls and other obstacles can interfere with the signal.
If you send photos somewhere with a weak signal, you could consider extra Wi-Fi points as well as a different router. The Consumentenbond explains how obstacles affect coverage, and TP-Link offers the Deco X50 in packs with different numbers of units.
First, compare your upload speed using a network cable with the speed over Wi-Fi where you send your photos. Then consider the physical space available, coverage and how the router will connect to your existing network.
Best for: when Wi-Fi coverage is already good where you upload and shelf space is the main constraint.
Keep in mind: a small casing won’t fix a slow internet connection, and a model with few LAN ports leaves less room for wired devices.
Best for: when the signal is weak where you upload and you have somewhere else to place an extra unit.
Keep in mind: each unit needs a suitable location and a power supply; claimed wireless speeds don’t guarantee upload speeds in your home.
Best for: when you want to connect several devices by cable as well as upload photos, or need features from an existing modem connection.
Keep in mind: a larger casing needs more shelf space, and an Ethernet WAN router won’t automatically replace the physical modem or network connection.
| What to consider | What to look for | Who is this important for? |
|---|---|---|
| Upload speed | First measure using a cable, then over Wi-Fi on the same connection; compare the upload speed, not just the download speed. | I want to send large photo albums and first find out which part of the connection is limiting my uploads. Around 31% of consumers put upload speed first. |
| Size and placement | Compare the casing with the usable shelf space, and leave room for plugs and cables, as well as a suitable position for the router. | I have little shelf space, but don’t want to hide the router away if that could affect coverage. Around 31% of consumers prioritise fit and placement. |
| Coverage where you upload | Check the signal where you upload; compare moving a single router with adding extra mesh points. | I upload somewhere with a weak Wi-Fi signal and want to know whether an extra point could make a difference. Around 23% of consumers prioritise coverage in that location. |
| Connection and management | Check whether the router connects behind your existing modem and what settings your provider requires. | I want to make sure the router works with my existing network and is easy to manage. Around 15% of consumers put connection and management first. |
Your internet connection’s upload speed and your wireless connection are two different links in the chain. A high Wi-Fi speed figure won’t make a limited upload speed from your internet connection any faster.
Measure using a network cable, then over Wi-Fi on the same connection. Compare the upload results where you send your photos.
A router may fit physically, but its location could weaken the Wi-Fi signal. Remember to allow room for cables and the adapter, too.
Measure the available space, including connections, and test coverage in the intended location. If necessary, compare it with a more open or central position.
The number of units and the full model name determine which version you’re comparing; X50, X50-PoE and X50-Outdoor are not the same model name.
Before buying, check the full model name, the version and the number of units. Also make sure the connections suit your setup.
The RT-AX57 Go is a compact model worth comparing if available space is your main constraint.
The Deco X50 range offers a single-unit option or a multi-unit pack, for when both coverage and placement need to be considered.
The FRITZ!Box 4050 is an option for use behind an existing modem if you want more wired connections or telephone features.
GL.iNet describes the Beryl AX GL-MT3000 as a compact travel router that can also work via Ethernet behind a modem.
These Joybuy products include routers for compact setups and mesh models for those who want to extend their Wi-Fi coverage. Before making your final choice, check the exact version, connection type and applicable EU requirements.
No image available
This router may be worth considering if shelf space is your main concern; weigh that against its stated maximum wired port speed of 100 Mbps.
Check that this port speed suits your internet connection and the devices you use with a wired connection.
No image available
This model may suit you if you’re considering a mesh setup that you can expand with other ASUS mesh systems; check that the combination you want is compatible.
The product name lists Wi-Fi 7 (802.11be), dual-band 2,4 GHz / 5 GHz and the colour White.
No image available
This router may suit you if you want to connect it to an existing modem and are considering an expandable ASUS AiMesh setup.
The product name lists AX1800, AiMesh, Gigabit Ethernet and dual-band 2,4 GHz / 5 GHz. Check the space available and your modem’s connection type.
No image available
This model may suit you if you’re considering a mesh network for an area with poor Wi-Fi coverage; check that the version you choose works with your existing network.
The product name lists AX3000, dual-band and Wi-Fi 6.
No image available
This mesh pack may suit you if coverage is poor where you upload and you have room and power for two units.
The product name lists two Deco X50 units, dual-band and Wi-Fi 6. Check that the 2-pack matches the setup you need.
No, not if the internet connection itself is limiting the upload. First measure using a cable and compare the result with Wi-Fi where you upload; the Consumentenbond points out that upload speed matters when sending photos and videos.
Don’t choose based on the casing size alone. The Consumentenbond explains that walls and other obstacles can interfere with the signal; also allow room for cables and the adapter, and test coverage in the intended location.
One router may be enough if coverage is good where you upload. Extra mesh points are worth considering if the signal is weak there and you have suitable places for the units. The stated wireless speed doesn’t guarantee upload speeds in that location.
ACM ConsuWijzer says that a provider cannot require you to use a particular brand or model. If you’re connecting the router directly, ask your provider which settings are required and check that the router is compatible with your connection.
Radio equipment placed on the EU market must meet the applicable requirements of the Radio Equipment Directive; the manufacturer affixes the CE marking when those requirements have been met. Internet-connected radio equipment covered by the regulation has also been subject to the applicable RED 3.3 cybersecurity requirements since 1 August 2025. The announced withdrawal of those requirements takes effect on 11 December 2027. Check what applies to the exact version; a product listing alone does not prove conformity.