Who is this relevant to?

Uploading photos in a busy household

You want to send large photo files while housemates are using the connection. Consumentenbond recommends measuring over a wired connection to distinguish a limited internet upload speed from a Wi-Fi problem.

Living with weak Wi-Fi in your room

Your connection gets worse mainly when you’re further away from the router. The router’s position and the connection to an additional Wi-Fi point determine whether extending your coverage is practical.

Managing a shared network

You want to connect your own router appropriately and agree how settings, access and updates will be managed. ACM ConsuWijzer explains your freedom to choose your own router, although the equipment must meet the relevant requirements.

What should you look for when choosing?

A single Wi-Fi 6 router

Suitable when: your wired upload speed is sufficient and the Wi-Fi signal already reaches the rooms reasonably well.

Bear in mind: Wi-Fi 6 won’t increase the speed of your internet package; also check that your devices support Wi-Fi 6.

Mesh or an additional access point

Suitable when: uploads mainly struggle in an area with weak Wi-Fi coverage, and you can position an extra point there effectively.

Bear in mind: an extra point requires equipment and installation; Ethernet backhaul requires a cable between the points.

A router with traffic management

Suitable when: the connection becomes less usable mainly when a housemate is using a lot of bandwidth.

Bear in mind: features such as QoS or a bandwidth limit allocate capacity, but won’t make your internet connection faster and require management.

Keeping your provider’s device

Suitable when: your wired upload speed is the limiting factor, or changing the router’s position and settings already solves the Wi-Fi problem.

Bear in mind: you won’t get new router features, but you won’t need to manage your own router settings and updates.

A wired speed test can help you work out whether the issue is mainly your internet connection, Wi-Fi coverage or several people using the network at once. Consumentenbond makes the same distinction between wired speed and Wi-Fi.

What to consider What should you check? Who is this important to?
Slow photo uploads Measure your upload speed over a wired connection and compare it with Wi-Fi where you upload; check that the WAN connection is compatible with your existing modem. If your upload is still slow despite a good Wi-Fi signal, you’ll want to find out which part of the connection is causing the problem first. Around 30% of consumers prioritise their internet upload speed.
Several people using the connection at once Check whether the exact model has features such as QoS or a bandwidth limit, and who will manage the settings. If you use the connection at the same time as your housemates, you’ll want to know how traffic is allocated and which settings are needed. Around 30% of consumers say this is their main concern.
Wi-Fi coverage in your room Try moving the router first; then see whether an extra point and, if needed, an Ethernet cable would be practical. If you upload from a room with a weak signal, coverage in that particular spot is crucial. Around 30% of consumers prioritise coverage there.
Connection and management Check the router or access point mode, your provider’s settings, guest access and how firmware updates are managed. If you want to connect your own router to a shared network, suitable settings and clear update management are important. Around 10% of consumers prioritise connection and management.

Common buying mistakes

  • Confusing fast Wi-Fi with a fast internet upload

    Your home Wi-Fi and your connection to your internet provider are separate links. A router won’t solve a limited upload speed from your internet connection.

    First, measure your speed over a wired connection, then test Wi-Fi where you upload your album. Consumentenbond recommends using an Ethernet cable to measure your home internet connection.

  • Buying mesh without checking where the extra point will go

    An additional mesh point needs a usable connection to the rest of the network. TP-Link lists Ethernet backhaul as an option for the Deco X50.

    First, try moving the router. Then check whether you can position the extra point effectively and, if needed, connect it with an Ethernet cable.

    An extra point requires another device and may also need cabling.

  • Assuming your own router updates itself

    With your own device, you’ll need to keep an eye on updates and network access. That also means agreeing who will manage a shared network.

    Agree who will check for firmware updates and manage access to the router settings. VeiligInternetten recommends keeping routers up to date.

Brands to consider

TP-Link

The Archer AX55 is a standalone Wi-Fi 6 router, while the Deco X50 is a mesh range designed to extend coverage.

  • According to TP-Link, the Archer AX55 supports OFDMA for simultaneous transmissions. The Deco X50 offers optional Ethernet backhaul.
  • These model specifications don’t prove that photo uploads will be faster on your internet connection. Also check that your devices support Wi-Fi 6.

ASUS

The RT-AX52 Pro is a Wi-Fi 6 router with traffic management and guest access features.

  • ASUS lists Traditional QoS, a bandwidth limit, a guest network and access point mode for the RT-AX52 Pro.
  • Check the full model number: RT-AX52 and RT-AX52 Pro are different model names. The listed features aren’t a guarantee of measured performance.

FRITZ!

According to FRITZ!, the FRITZ!Box 4060 is a tri-band Wi-Fi 6 router that can be connected behind an existing modem; mesh expansion is an option.

  • FRITZ! lists a 2.5-gigabit WAN connection and three gigabit LAN ports for this model.
  • Extra features such as DECT are only relevant if you need them. Before buying, check the connections and features of the exact version.

Wi-Fi solutions at Joybuy

These Joybuy products include both standalone routers and mesh systems for home Wi-Fi. If you want to find out whether extra Wi-Fi coverage or replacing your router could solve your upload problem, start by measuring over a wired connection.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68, 2-pack

A mesh system for anyone who needs Wi-Fi in several areas of the home.

The product name specifies Wi-Fi 7.

View at Joybuy
ASUS ZenWiFi BT8 tri-band mesh system, 2-pack

ASUS ZenWiFi BT8, 2-pack, tri-band Wi-Fi 7

A mesh system for anyone who needs Wi-Fi in different areas of the home.

The product name specifies tri-band (2.4 GHz/5 GHz/6 GHz) and Wi-Fi 7 (802.11be).

View at Joybuy
ASUS RT-AX52 AX1800 dual-band router

ASUS RT-AX52 AX1800

A standalone router for anyone who wants to connect several devices to their home Wi-Fi.

The product name specifies dual-band (2.4 GHz/5 GHz) and Gigabit Ethernet.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50, 3-pack

A mesh system for anyone who needs Wi-Fi in several areas of the home.

The product name specifies dual-band (2.4 GHz/5 GHz) and Wi-Fi 6 (802.11ax).

View at Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

A mesh router for anyone who wants to extend their Wi-Fi network across several areas.

The product name specifies dual-band and Wi-Fi 7.

View at Joybuy

Frequently asked questions

Can a new router help me upload my photo album faster?

Not if the upload speed measured over a wired connection is the limiting factor. First, measure over a wired connection, then test Wi-Fi where you upload. If the wired results are consistently disappointing, contact your provider. Consumentenbond recommends this test to distinguish your internet connection from Wi-Fi.

Are you allowed to use your own router in the Netherlands?

Yes. ACM ConsuWijzer explains that you’re free to use your own router. The equipment must meet the relevant requirements, so ask your provider which connection settings you’ll need.

Do you need a licence for ordinary home Wi-Fi?

According to the Rijksinspectie Digitale Infrastructuur, Wi-Fi on the usual licence-exempt frequencies doesn’t require notification or registration. This applies to frequencies that are actually licence-exempt.

What maintenance does your own router need?

Check for firmware updates, enable automatic updates where possible and change the default passwords. With your own router, you manage updates and access yourself; VeiligInternetten recommends keeping routers up to date.

Is the legal guarantee in the Netherlands always exactly two years?

No. According to ACM ConsuWijzer, the legal guarantee depends on how long you can reasonably expect the product to last. If a fault occurs through normal use, contact the seller.