Who is this guide for?

A student with a study space far from the router

If your lesson keeps cutting out in a room behind walls or on another floor, it’s worth checking where your Wi-Fi points are and how they’re connected. The Consumentenbond notes that walls and ceilings can interfere with the signal.

A household with several people online at once

If other people at home are video-calling or streaming during your lesson, it’s a good idea to check both your internet connection and the Wi-Fi in the areas where you use it. VodafoneZiggo explains that several devices being used at the same time can put extra pressure on the network.

A household with both old and new devices

If you want to keep using devices from different generations and may keep your provider’s equipment, check the Wi-Fi standards and connection options supported by each device. The Consumentenbond explains that older Wi-Fi devices can connect, but won’t benefit from the improvements offered by Wi-Fi 6.

What should you consider when choosing?

Start by checking your wired connection and the Wi-Fi where you study. Then decide whether better positioning, a single router or access point, or several mesh points is right for you.

What to consider What should you check? Who is this important for?
Reception where you study Compare Wi-Fi with a wired test and see whether moving your equipment, adding one access point or using extra mesh points would suit the space. If my lesson keeps cutting out in a room behind walls, I want to know whether moving the equipment or adding a point could make a difference. Around 33% of consumers say coverage is their main concern when buying.
Several people online at once Test your upload speed too, and check the connection at a busy time. Don’t look only at the advertised Wi-Fi speed. If other people at home are online while I’m having a lesson, I want to check the connection at a busy time. Around 27% of consumers say simultaneous use is their main concern when buying.
Old and new devices Check which Wi-Fi standards each device supports and compare them with the settings of the exact router model. If I want to keep using older laptops or other devices, it’s important that they can connect, even if they can’t make full use of all the benefits of Wi-Fi 6. Around 20% of consumers say device compatibility is their main concern when buying.
Provider equipment and settings If you’re replacing your equipment, ask your provider about the connection settings. If you’re keeping your existing router, check its access point mode, updates and password settings. If I want to keep my current provider equipment, I want to know which settings and features will still be available. Around 20% of consumers say connection and management are their main concerns when buying.

Common mistakes

  • Assuming a higher AX number means better coverage

    An advertised wireless speed isn’t a real-world test in your home. Walls, positioning and your internet connection can all affect how things work where you study.

    First test your internet connection using a cable, then check the Wi-Fi where you study. Next, decide whether moving your equipment, adding one access point or using mesh is right for your situation.

  • Putting an extra mesh point where the Wi-Fi is already very weak

    A wireless mesh point also needs a usable connection to the other points.

    Check the signal between the points, and consider an Ethernet connection if you can run a cable to that location.

  • Assuming every Deco feature will remain available in access point mode

    TP-Link says that some features aren’t available in the Deco app in this mode, including parental controls and port forwarding.

    Decide in advance which device will manage the network, and check which features are available on the exact system in that setup.

Brands to compare

TP-Link

The Archer AX55 is a standalone Wi-Fi 6 router, while Deco X50 is a mesh system sold in sets with different numbers of points.

  • TP-Link says Deco can work behind an existing router in access point mode.
  • Some Deco router features aren’t available in this mode. Advertised Wi-Fi speeds don’t tell you what speed you’ll get in your study.

FRITZ!

The FRITZ!Box 4050 is designed to work behind a DSL, cable or fibre-optic modem and also includes DECT features.

  • FRITZ! lists support for Wi-Fi 4 and Wi-Fi 5.
  • DECT features may not be useful if your household only needs the router for online lessons.

ASUS

The RT-AX58U is a standalone router. The Dutch specifications list AiMesh, a guest network and configurable traffic management.

  • These settings may be useful if you want to manage your network in detail.
  • Check the exact hardware version and settings; these features alone don’t prove that lesson calls will improve.

Linksys

The MR7350 is a standalone Wi-Fi 6 router with four Gigabit LAN ports and support for Linksys Intelligent Mesh.

  • The Ethernet ports may be useful if you want to connect your lesson equipment by cable.
  • The advertised coverage doesn’t tell you what range you can expect in your home. Warranty terms may vary depending on the country of purchase.

Router and mesh options at Joybuy

This selection includes mesh sets with several points and a standalone ASUS router. Before choosing another device, first check whether adjusting your existing connection or equipment placement will solve the problem.

TP-Link Deco BE68 mesh set with two points

TP-Link Deco BE68 2-pack

A mesh set with two points, ideal if you want to place Wi-Fi equipment in more than one location.

Wi-Fi 7 and tri-band. The product description lists MLO, wired and wireless backhaul, and connectivity for 200+ devices.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, set with two points

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

A mesh set with two points, ideal if you want to use Wi-Fi in several rooms.

The product information lists Wi-Fi 4, Wi-Fi 5 and Wi-Fi 6, Ethernet backhaul and parental controls.

View at Joybuy
ASUS RT-AX52 standalone dual-band Wi-Fi 6 router

ASUS RT-AX52 AX1800 AiMesh router

A standalone router for a setup where one well-chosen location could provide coverage in your study.

Dual-band on 2.4 GHz and 5 GHz, Wi-Fi 6, AiMesh and Gigabit Ethernet ports. The product information also lists OFDMA, MU-MIMO and older Wi-Fi standards.

View at Joybuy
TP-Link Deco X50 mesh set with three points

TP-Link Deco X50 3-pack

A set with three mesh points, ideal if you want Wi-Fi in several areas of your home.

Wi-Fi 6 with support for Wi-Fi 4 and Wi-Fi 5. The product information lists Ethernet ports, guest networks, OFDMA and MU-MIMO.

View at Joybuy
TP-Link Deco XE75 mesh set with three frequency bands

TP-Link Deco XE75 tri-band mesh

A mesh solution for using Wi-Fi in several rooms. Check that the points can be positioned to suit your home.

Wi-Fi 6E with 2.4 GHz, 5 GHz and 6 GHz bands. The product information also lists support for Wi-Fi 4, Wi-Fi 5 and Wi-Fi 6.

View at Joybuy

Frequently asked questions

Do you need a router with the highest advertised speed for an online lesson?

No. Speed alone isn’t a reason to choose another router. First test your internet connection and the Wi-Fi where you study. Advertised wireless speeds don’t guarantee a particular speed in your home. For a 720p group call, Zoom specifies 2.6 Mbit/s upload and 1.8 Mbit/s download, subject to the requirements for that HD feature. These figures don’t automatically apply to other lesson platforms or settings.

Can a mesh system work behind your internet provider’s router?

Yes. If the system supports access point mode, your existing router can continue to manage the network. TP-Link describes this option for Deco. Check the settings for the system you choose, as features including parental controls and port forwarding aren’t available in the Deco app in this mode.

Can you choose your own router or modem in the Netherlands?

According to ACM ConsuWijzer, a provider can’t require you to use a particular router or modem brand or model. Your device must still meet the applicable requirements, so ask your provider about the necessary connection settings before replacing your equipment.

Do you need a licence for home Wi-Fi, and what should you look for when buying?

According to the Rijksinspectie Digitale Infrastructuur, home Wi-Fi doesn’t require a licence if you use the designated frequencies and meet the conditions of use. A router sold as a radio device in the Netherlands must carry the correct CE marking. Check this on the specific device.

How can you keep your router secure after installation?

Use strong passwords, adjust your router settings and install updates. The Autoriteit Persoonsgegevens advises turning off remote access if you don’t need it. Also check how the model you choose receives updates.