Who is this guide for?

Watching films behind thick walls

Your screen is in a spot where walls or ceilings may weaken the Wi-Fi signal. You want to find out first whether you need to move your router or add another Wi-Fi access point. The Consumers’ Association points out that obstacles can interfere with the signal.

If you can run a cable

You can run an Ethernet cable to your viewing area and want to weigh up whether a wired access point or mesh system with Ethernet backhaul will suit your network. TP-Link describes Ethernet backhaul as a way to connect Deco units using a cable.

If there’s no route for a cable

You want Wi-Fi in several rooms, but the units will need to connect to each other wirelessly. The position of each unit is important: it still needs to receive a usable connection. The Consumers’ Association recommends placing a Wi-Fi extender somewhere with a strong enough signal.

What should you consider when choosing?

First, check that your broadband connection itself provides enough speed. Then check the signal near your screen, and only after that choose between moving your router, adding a wired access point or using wireless mesh.

What to consider What should you check? Who is this important for?
Signal near your screen Test the connection where you watch and at possible locations for an extra Wi-Fi access point. Consider how many units you need, not just the stated coverage. If a film keeps buffering behind walls, I want to know whether a different position will improve the signal near my screen. Around 36% of consumers prioritise coverage.
A stable connection First, test your broadband connection using a cable; then check whether you can run a cable between the Wi-Fi units. I want to stream a film without the connection between the units becoming the weak link. Around 29% of consumers give streaming stability top priority.
Connection to your modem Check that the equipment works in the router or access point mode you need, and how it connects to your modem. If I need to keep my existing modem, I want to know how the extra equipment will fit into my setup. Around 21% of consumers are mainly looking for a setup that suits their needs.
Purchase and running costs Compare how many Wi-Fi units you need, and consider the power consumption of equipment that stays switched on. I don’t want to buy extra units if simply moving the router will do, and I also want to factor in running costs. Around 14% of consumers prioritise avoiding unnecessary expenses.

Common buying mistakes

  • Assuming a higher Mbps figure guarantees better coverage

    Advertised speeds and coverage claims don’t tell you what sort of connection you’ll get behind thick walls in your home. The Consumers’ Association lists walls and ceilings as obstacles that can interfere with Wi-Fi.

    Test your internet speed using a cable at the modem, then check the Wi-Fi where you watch and at possible locations for extra units.

  • Putting a wireless mesh unit where the signal is already weak

    An extra unit still needs a usable connection to the network. A cable between units can replace that wireless connection, but you’ll need a route for the cable.

    Try a few different positions first. If you can run a cable, compare a wired access point with mesh using Ethernet backhaul.

  • Confusing a single-unit set with a multi-unit solution

    Mesh products are available with different numbers of Wi-Fi units; a single-unit set won’t give you the same placement options as a multi-unit set.

    Check how many units are in the box and decide in advance where you want to place them around your home.

Brands to consider

TP-Link

The Deco X50 is an example of an expandable Wi-Fi 6 mesh set. It may be a good option if you want to spread your Wi-Fi across several units.

  • TP-Link lists three gigabit ports on each Deco X50 unit and describes Ethernet backhaul as a way to connect Deco units using a cable.
  • Stated coverage doesn’t guarantee a good connection behind thick walls. Also check how many units are included in the set you choose.

ASUS

The RT-AX58U is a standalone Wi-Fi 6 router for anyone looking for different router features or an access point mode.

  • According to ASUS specifications, the RT-AX58U has four gigabit LAN ports, as well as router, access point and AiMesh node modes.
  • The available modes don’t prove that a single router will reach a viewing area behind several thick walls. Also check how the device connects to your provider’s modem.

FRITZ!

The FRITZ!Repeater 3000 AX extends an existing network. It may be useful, for example, if you can run a LAN cable to the extra Wi-Fi access point.

  • FRITZ! describes a LAN bridge that lets the repeater connect by cable to a router from another brand.
  • This device extends Wi-Fi; it isn’t a standalone replacement for a modem or router connection. When buying, check that the version is suitable for your setup.

NETGEAR

The Orbi RBK763S is an example of a mesh set with three Wi-Fi 6 units for use in several rooms.

  • NETGEAR lists a dedicated wireless connection between the router and satellites, and seven gigabit ports across the set.
  • Stated coverage and speed aren’t a measure of the connection in a home with thick walls. Positioning still matters.

Joybuy products

These mesh sets are designed to spread Wi-Fi across several rooms. Check how many units are included in each version and whether you want to connect them wirelessly or with a cable.

TP-Link Deco BE68 (2-pack)

TP-Link Deco BE68 (2-pack)

This set of two mesh units is designed to spread Wi-Fi across several areas of your home; check where the units can get a connection.

View at Joybuy
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), Wi-Fi 6

The three units give you options for placing them across several rooms; check in advance where you can position them.

The product name specifies Wi-Fi 6 and dual-band on 2.4 GHz and 5 GHz. TP-Link describes Ethernet backhaul for Deco units; you’ll need a suitable route for the cable.

View at Joybuy
TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), Wi-Fi 6E

This set of three mesh units is designed to provide Wi-Fi in several areas of your home; make sure you have enough space to place them in useful locations.

The product name specifies tri-band Wi-Fi 6E on 2.4 GHz, 5 GHz and 6 GHz.

View at Joybuy
TP-Link Deco X50-PoE (3-pack), Wi-Fi 6

TP-Link Deco X50-PoE (3-pack), Wi-Fi 6

The three mesh units are designed to be placed in several locations; check that your planned connection and power supply are suitable for PoE.

The product name specifies Wi-Fi 6 and PoE (Power over Ethernet).

View at Joybuy
TP-Link Deco X50 (2-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (2-pack), Wi-Fi 6

This set of two units is designed to provide Wi-Fi in more than one location; check that your chosen locations will give you a usable connection.

The product name specifies Wi-Fi 6 and dual-band on 2.4 GHz and 5 GHz. TP-Link describes Ethernet backhaul for Deco units as an option if you can run a cable between them.

View at Joybuy

Frequently asked questions

Do I mainly need a new router if my film keeps buffering?

Not necessarily. First, test the connection with an Ethernet cable close to the connection point, then compare it with the connection near your screen. If the broadband connection itself is too slow, a different Wi-Fi router won’t fix it. If the Wi-Fi is weak behind the walls, you could move the router or consider adding another Wi-Fi access point.

Where should I put an extra Wi-Fi access point?

Don’t put a wireless unit somewhere the incoming signal is already poor. Try a position in between and check the connection using the setup guide. The Consumers’ Association also recommends keeping your router up to date and securing your network properly.

What speed do I need to watch a 4K nature documentary?

For 4K UHD streaming on Netflix, Netflix recommends a stable internet speed of at least 15 Mbps. This recommendation applies to Netflix; it isn’t a speed guarantee for your router or other streaming services.

What should I check about costs and support after buying?

Compare how many Wi-Fi units you need, and factor in the power consumption of units that stay switched on. Check what warranty and support apply to the version you choose; terms can vary between products.

Can I use Wi-Fi at home in the Netherlands without a licence?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi in the Netherlands uses radio frequencies that don’t require a licence, notification or registration, provided the conditions of use are met. Equipment placed on the EU market must also meet European radio equipment requirements; compliant equipment carries a CE mark.