Who is this choice relevant to?

Student using a busy Wi-Fi network

Your study room has a signal, but other people in your home are using the internet at the same time. Check whether a single router with suitable network features will be enough, and test your internet connection before blaming Wi-Fi. The Consumentenbond advises against immediately upgrading to a more expensive broadband package.

Student in a room with a weak signal

Your connection is good near the main router, but weak where you take your lessons. Consider the placement of the access point, adding another one or using mesh. A wired connection between mesh units is an option if you can run a cable. Tweakers describes wired backhaul as the more stable way to connect mesh nodes.

Housemate who manages the network

You manage the home’s internet connection and updates. Check whether the new router will sit behind existing equipment or connect directly to your provider’s connection. ACM ConsuWijzer explains the conditions for choosing your own equipment; also check your provider’s connection instructions.

What should you look for when choosing?

First, test the connection using a cable and where you take your lessons. Then decide whether your main concern is coverage, simultaneous use, or the connection and its management. This helps you avoid choosing a router when the cause lies elsewhere.

What to consider What should you check? Who is this important to?
Simultaneous use Check the Wi-Fi standard and the available traffic management settings. Also check whether your device can use the connection you have in mind. If other people in your home are online at the same time, you’ll want to know whether a single router provides sufficient coverage and suitable settings where you take your lessons. Around 36% of consumers prioritise simultaneous use.
Coverage in the study room Test the connection where you take your lessons and check whether you can position an extra access point effectively or connect it using Ethernet. If the signal is good near the main router but weak in your study room, coverage in that spot matters more than the maximum speed shown on the box. Around 29% of consumers are most concerned about coverage.
Connection and management Find out what equipment is already installed, who manages it and how your provider says your connection should be set up. If you manage the shared connection, you’ll want to know whether the new router goes behind the modem and who can change its settings. Around 21% of consumers prioritise the connection and its management.
Security and updates Check how firmware updates work, whether you want guest access and who will have administrator rights. If you’re responsible for visitors and maintenance, access management and updates are important throughout the product’s use. Around 14% of consumers prioritise secure network management.

Common pitfalls

  • Assuming the highest Wi-Fi speed on the box is the speed you’ll get for your language lessons

    A high advertised Wi-Fi speed doesn’t tell you whether your internet connection itself is working well or whether Wi-Fi coverage is good enough where you take your lessons.

    First, test the connection using a network cable and compare it with Wi-Fi where you take your lessons. If your wired test results are repeatedly disappointing, speak to your provider.

  • Buying a mesh system without planning how the units will connect

    The placement of mesh nodes and how they connect to each other both matter. A mesh system won’t automatically solve a coverage problem if the units don’t have a suitable connection between them.

    Before choosing a system, check where the units could go and whether you can run an Ethernet cable between them. Tweakers describes a wired connection as the more stable option for mesh nodes.

  • Confusing a standalone router with a replacement modem

    A router used behind a compatible modem won’t automatically replace your provider’s modem or connection equipment. FRITZ! says the FRITZ!Box 4060 is designed for use behind a modem.

    Before buying, check which equipment will stay in place and which connection method your provider supports. ACM ConsuWijzer explains that requirements can vary depending on the type of connection.

Brands to compare

TP-Link

The models listed include both a standalone Wi-Fi router and a mesh system, so you can compare the two setups.

  • TP-Link lists OFDMA for the Archer AX55 and optional Ethernet backhaul for the Deco X50.
  • These model specifications alone don’t prove that lessons will stream without interruptions in a particular home.

ASUS

The RT-AX58U is a standalone router, while the ZenWiFi BD4 is a separate mesh product range.

  • ASUS lists Adaptive QoS for the RT-AX58U and 2.5-gigabit ports for the BD4.
  • Features of the BD4 don’t automatically apply to the RT-AX58U, or vice versa.

FRITZ!

The FRITZ!Box 4060 is a network router designed for use behind a compatible modem.

  • For this model, FRITZ! lists a 2.5-gigabit WAN connection and three gigabit LAN ports.
  • This model won’t necessarily replace your provider’s modem or fibre equipment.

Linksys

The Velop Micro 6 is a dual-band Wi-Fi 6 mesh product range for anyone comparing systems with multiple Wi-Fi access points.

  • Linksys lists expandable nodes and a 2.5-gigabit internet port for this range.
  • The coverage and speed quoted by Linksys aren’t measurements taken in your home.

Wi-Fi routers and mesh systems at Joybuy

This selection includes standalone Wi-Fi routers and mesh systems for simultaneous internet use and Wi-Fi coverage in a study room.

ASUS RT-AX52 AX1800 dual-band router

ASUS RT-AX52 AX1800

A standalone router to compare if coverage is already good where you take your lessons and you’re looking for network features to support multiple devices.

Wi-Fi 6; dual-band (2.4 GHz and 5 GHz); OFDMA and MU-MIMO; AiMesh support.

View at Joybuy
TP-Link Deco X50 mesh system with 3 units

TP-Link Deco X50 (3-pack)

A mesh system to consider if Wi-Fi needs to cover several rooms; check where the units can go before you buy.

Wi-Fi 6; three units; gigabit ports; OFDMA and MU-MIMO. TP-Link lists optional Ethernet backhaul for the Deco X50.

View at Joybuy
ASUS RT-AX52 Pro AX3000 dual-band router

ASUS RT-AX52 Pro AX3000

A standalone router to compare if coverage is already sufficient where you take your lessons and you may want to expand to mesh later.

Wi-Fi 6; dual-band (2.4 GHz and 5 GHz); OFDMA, MU-MIMO and AiMesh support.

View at Joybuy
TP-Link Deco XE75 Pro mesh system with 3 units

TP-Link Deco XE75 Pro (3-pack)

A mesh system to compare if Wi-Fi needs to be spread across several access points; check that the connections and management features suit your home.

Wi-Fi 6E; tri-band (2.4 GHz, 5 GHz and 6 GHz); three units; QoS and guest access.

View at Joybuy
TP-Link Deco X50-PoE mesh system with 3 units

TP-Link Deco X50-PoE (3-pack)

A mesh system to consider if you want Wi-Fi across several areas and PoE connectivity is relevant to your setup.

Wi-Fi 6; three units; PoE support; two Ethernet ports per unit; QoS and guest access.

View at Joybuy

Frequently asked questions

Should you immediately buy a faster router or broadband package if your language lessons keep buffering?

No. First, test your internet connection using a network cable and compare it with Wi-Fi where you take your lessons. The Consumentenbond advises against immediately upgrading to a more expensive broadband package. If your wired test results are repeatedly disappointing, speak to your provider.

How do you connect your own router if you already have a provider’s modem?

First, find out whether the router should sit behind your existing modem or connect directly to your provider’s connection. Ziggo explains how to use bridge mode to connect your own router behind its modem, but notes that this mode can’t be switched on or off with its fibre modem. Ask your own provider for connection instructions for your service.

Who is responsible for updates when you use your own router?

Agree on who will manage the router, then check for firmware updates when you set it up and regularly afterwards. ACM ConsuWijzer stresses that your own equipment must be kept up to date; VeiligInternetten recommends enabling automatic updates if available.

Can you choose your own router in the Netherlands, and does your provider have to help you connect it?

According to ACM ConsuWijzer, you’re free to choose your router, but a provider may refuse equipment that isn’t secure. The provider must publish or supply the connection settings you need; ask for them if you want to connect your equipment directly.

What should you ask about installation and support before buying?

Check whether you need extra Wi-Fi access points or Ethernet cables, who will install the equipment and who will manage updates. Ask your provider which connection method suits your equipment, and check which features and connections the model you’ve chosen offers.