Who is this relevant to?

Watching upstairs with a weak Wi-Fi signal

If a film keeps buffering on another floor, you’ll want to know whether a well-placed Wi-Fi point will do the job or whether the signal through the floor is the problem.

A household with viewing spots on several floors

You want to reach different rooms, so you’re looking beyond the advertised speed to consider the number of Wi-Fi points and the connection between them.

Looking at cable or power socket options

You may be able to run a network cable or try powerline, and want to know whether either option can avoid a weak wireless connection between floors.

What should you look for when choosing?

Wireless repeater

A good fit if: you mainly want to reach one viewing spot and can place the repeater somewhere the router’s Wi-Fi signal is still usable.

Bear in mind: the repeater uses an existing wireless connection, so a weak signal through the floor won’t automatically get stronger.

Mesh Wi-Fi points

A good fit if: you want coverage across several floors and can position the points so they connect well to one another.

Bear in mind: a multi-point kit doesn’t guarantee coverage through every floor; a cable between points may allow you to use ethernet backhaul.

Wired access point or mesh point

A good fit if: you can run a network cable to another floor or your viewing spot and don’t want to rely on a wireless connection between points.

Bear in mind: you’ll need to run the cable and check that the connections you choose are compatible with your equipment.

Powerline with Wi-Fi

A good fit if: running a cable isn’t practical and the wireless connection between floors is weak.

Bear in mind: performance depends on your sockets and sources of electrical interference, so test the locations you plan to use.

What to consider What should you check? Who is this important for?
Connection between floors Test at the planned location for each Wi-Fi point and at your viewing spot; check whether ethernet backhaul is possible. If I watch upstairs, I want to know whether a point there can still reach the router. Around 36% of consumers say the connection between floors is their top priority.
Playback at your viewing spot Test at the television or streaming device during normal use. Netflix recommends at least 5 Mbps for Full HD and 15 Mbps for 4K UHD on its own service, with a stable connection; other services may have different requirements. If I want to avoid interruptions during a film, I’ll check the connection at the streaming device. Around 29% of consumers prioritise uninterrupted playback at that spot.
Compatibility with your existing equipment Note your router model and check which mesh features work with it; also see whether access point or LAN bridge mode is available. If I want to keep using my router and other devices, I’ll check which features work with my set-up. Around 21% of consumers prioritise compatibility with existing equipment.
Number of points and installation Check how many adapters or Wi-Fi points are included in the pack and whether you’ll need cables or extra connections. If I want to keep my set-up simple, I’ll want to know in advance how many points and connections I’ll need. Around 14% of consumers prioritise the equipment and installation required.

Common buying mistakes

  • Putting the repeater where the Wi-Fi signal already drops out

    A wireless repeater needs to receive the router’s signal. Floors and obstacles can weaken that connection.

    Check the signal where you plan to place the repeater, then test it by the television.

  • Assuming the advertised Wi-Fi speed is the speed you’ll get for films

    Speed at your viewing spot also depends on the connection to the Wi-Fi point and on your streaming device.

    Test at the streaming device. Use a streaming service’s speed recommendations only as a guide for that service.

  • Choosing powerline without testing your sockets

    Where you plug in the adapters and electrical devices can affect data transfer.

    Devolo recommends plugging adapters directly into wall sockets wherever possible. Test the connection at the sockets you plan to use, with your usual electrical devices switched on.

  • Assuming every mesh feature works with your router

    Standard router compatibility and support for a specific mesh feature aren’t the same thing.

    Check your router model and the mesh feature in question. If you don’t need that feature, you could also check whether a LAN-connected access point will work for you.

Brands worth considering

TP-Link

The RE705X repeater and Deco X50 mesh range are worth considering if you’re looking at wireless extension, access point mode or a wired connection between mesh points.

  • TP-Link says the RE705X has a gigabit ethernet port and OneMesh. The Deco X50 supports optional ethernet backhaul and has three gigabit ports per point.
  • The specifications don’t tell you whether the connection will work through every floor. Also check that your router supports OneMesh.

FRITZ!

The FRITZ!Repeater 1200 AX is worth considering if you want to use it as an access point with a network cable, including with a router from another manufacturer.

  • FRITZ! describes this model as supporting LAN bridge mode with a router from another manufacturer.
  • This set-up requires a network cable. This feature doesn’t prove that brand-specific mesh features will work with every router.

devolo

The Magic 2 WiFi next range may be worth considering if running a cable isn’t practical and the wireless connection between floors is weak.

  • According to devolo, the connection runs through your home’s electrical wiring; a multi-room kit with three adapters is also available.
  • Performance may depend on socket locations and sources of electrical interference. Devolo notes that Magic doesn’t work with its dLAN range.

Products for Wi-Fi across multiple floors

This selection of Joybuy products includes powerline, mesh Wi-Fi points and wireless Wi-Fi extenders for different viewing spots around your home.

TP-LINK TL-WPA7517 KIT Powerline adapter starter kit

TP-LINK TL-WPA7517 KIT Powerline adapter starter kit

This starter kit may suit you if you want to use your existing electrical wiring to create a network connection at your viewing spot.

The description lists IEEE 1901 and a maximum data transfer rate of 1000 Mbit/s; this isn’t a measurement of the speed you’ll get at your television. Test the connection at the socket locations you plan to use.

View at Joybuy
TP-Link Deco X50 (3-pack) Dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack) Dual-band Wi-Fi 6

Three mesh units may suit you if you want to set up Wi-Fi points in several locations; coverage on each floor will also depend on where you place them.

The product description lists Wi-Fi 6, dual-band and three gigabit ethernet ports per unit.

View at Joybuy
WiFi Repeater Pro Black

Wifi Repeater Pro Black

This repeater may suit you if there’s still a usable connection to your router where you plan to put it.

The product description lists 2.4 GHz, speeds of up to 300 Mbps and two external antennas. Set up the repeater close to your router first, then move it only once the indicator light turns blue.

View at Joybuy
TP-Link Deco X50-PoE (2-pack) Wi-Fi 6

TP-Link Deco X50-PoE (2-pack) Wi-Fi 6

Two mesh units may suit you if you want Wi-Fi in several locations and are considering a wired set-up.

The product description lists Wi-Fi 6, PoE support and two ethernet ports per unit. Check that these connections suit the set-up you have in mind.

View at Joybuy
TP-Link Deco X50 (2-pack) Dual-band Wi-Fi 6

TP-Link Deco X50 (2-pack) Dual-band Wi-Fi 6

Two mesh units may suit you if you want Wi-Fi in different locations and can run a network cable between the points.

The product description lists optional ethernet backhaul and three gigabit ethernet ports per unit. Ethernet backhaul requires a network cable.

View at Joybuy

Frequently asked questions

Can I put a repeater on a floor where there’s hardly any Wi-Fi?

Only if the repeater can still receive a usable connection from your router there. Try a spot with a stronger router signal; if the connection through the floor is still weak, consider a wired access point or another way to connect the floors.

How can I check whether my connection is good enough for watching a film?

Test at the television or streaming device, not just next to the router. The Netflix Help Centre recommends at least 5 Mbps for Full HD and 15 Mbps for 4K UHD on a stable connection; other services may have different requirements.

Will a repeater work with a router from another brand?

It depends on which feature you want to use. TP-Link lists the RE705X as compatible with Wi-Fi routers and mentions OneMesh separately; check whether that mesh feature works with your router. FRITZ! describes the FRITZ!Repeater 1200 AX as supporting a wired LAN bridge with a router from another manufacturer.

What can I do if powerline is slow at my viewing spot?

Try other wall sockets in the locations you plan to use and check whether sources of electrical interference are affecting the connection. Devolo recommends plugging adapters directly into a wall socket wherever possible, rather than into a multi-socket adaptor or extension lead.

What requirements apply to Wi-Fi equipment sold in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, radio equipment placed on the market in the Netherlands must meet the applicable requirements of the Radio Equipment Directive and carry a CE mark. Stricter cybersecurity requirements have applied since 1 August 2025. Check the documentation for the version being sold; the product name alone doesn’t confirm that it meets the requirements.