Who is this buying guide for?

For readers with one distant study

You want to download magazines in a spot where the router signal is weak, and you’re first looking for a suitable place to put a single repeater. The Consumers’ Association recommends placing a Wi-Fi booster between the router and the weak-signal area at the back of the house.

For readers with an Ethernet connection

You can connect your study by cable and want to know whether an access point could avoid a weak wireless connection. Testing the connection over Ethernet can also help you tell the difference between Wi-Fi problems and a slow internet connection.

For readers with several rooms out of range

You have a wider coverage problem and want to compare the placement and connections of several Wi-Fi points. The right choice also depends on where the points can establish a usable connection with one another.

What should you look for when buying?

Wireless repeater

Choose this option: you want to reach one distant study and there’s still a spot between the router and the room with usable Wi-Fi.

Bear in mind: the repeater still depends on its wireless connection to the router. The stated maximum speed isn’t a guaranteed download speed.

Access point connected by Ethernet

Choose this option: there’s already an Ethernet cable to your study, or you can run one.

Bear in mind: you’ll need a cable and a device with access point mode.

Mesh with multiple Wi-Fi points

Choose this option: several rooms or floors have poor coverage, and the Wi-Fi points can be connected to one another reliably.

Bear in mind: you’ll need multiple devices. Check that your router and Wi-Fi points support the intended mesh features together.

Powerline with Wi-Fi

Choose this option: running an Ethernet cable isn’t practical and there’s no suitable spot for a wireless connection along the way.

Bear in mind: you’ll need at least two adapters. TP-Link’s installation instructions warn that different electrical circuits can prevent the adapters from connecting.

The Consumers’ Association recommends finding a spot with usable reception before setting up a repeater. The right option depends mainly on the type of connection you can bring to your study.

What to consider What should you check? Which consumers is this for?
Usable signal along the way Find a spot with strong enough reception, then test the connection in your study. If I want to download magazines in one distant study, I want to know where a repeater can still maintain a connection to the router. Around 40% of consumers say coverage in one distant room is their top buying priority.
Connection to the room Check whether there’s an Ethernet connection or access point mode. For powerline, test the connection at the sockets you plan to use. If I don’t want a weak wireless connection along the way, I’ll compare Ethernet with powerline and see what works in my home. Around 30% of consumers prioritise how the connection reaches the room.
Installation and compatibility Check the exact router model, supported mesh features and installation instructions. If I want to keep using my current router, I want to know in advance whether it works with the features I need. Around 20% of consumers put installation and compatibility first.
Equipment and usage Compare how many Wi-Fi points you’ll need and check the stated energy consumption of the exact version. If I leave my network equipment switched on for long periods, I want to know how many devices my coverage plan will require. Around 10% of consumers focus mainly on the number of devices and ongoing running costs.

Common buying mistakes

  • Plugging the repeater into the room with the weakest signal

    The repeater also needs a usable connection to the router. If the signal is already dropping out, it can’t restore that connection by itself.

    First find a spot along the way, then test the connection in your study once the repeater is set up.

  • Assuming the stated Mbps is the download speed in your study

    A Wi-Fi standard or maximum product speed doesn’t tell you how fast the connection will be in your home.

    Compare a download or speed test in your study with a test using an Ethernet cable at the router. The Consumers’ Association recommends a wired connection for this kind of speed test.

  • Assuming ‘mesh’ works with every router

    According to TP-Link, the OneMesh feature on the TP-Link models mentioned requires a OneMesh router. A general repeater function isn’t the same as this specific mesh integration.

    Before buying, check that your exact router and the device you’ve chosen support the mesh feature you want.

  • Choosing powerline without testing the sockets

    With the TP-Link adapters described, different electrical circuits or a poor powerline connection can prevent them from working.

    Check the installation requirements and test a suitable set of adapters in the sockets you plan to use.

Brands to compare

TP-Link

TP-Link describes the RE505X and RE705X as Wi-Fi 6 repeaters with an Ethernet port and access point mode.

  • According to TP-Link, the RE505X and RE705X support OneMesh when paired with a OneMesh router.
  • The stated maximum speed isn’t a measured download speed in your study. Check your exact router and the mesh feature you want.

FRITZ!

FRITZ! describes the FRITZ!Repeater 1200 AX as a compact Wi-Fi 6 repeater with a Gigabit LAN connection.

  • The listed LAN connection is useful if you want to use a wired network connection.
  • For the mesh integration you want, check your router and the exact version. A manufacturer’s specification can’t predict performance in an individual home.

devolo

devolo describes the WiFi 6 Repeater 3000 as a repeater that can also be used as an access point.

  • The manufacturer lists a Gigabit LAN connection for this model.
  • Check the version and applicable compliance requirements for the offer you’re considering. The stated maximum data transfer speed isn’t a real-world test.

Joybuy products for this situation

These products offer different ways to get Wi-Fi to your study: powerline, a wireless repeater, a wired access point or mesh. Before buying, check the exact version and applicable EU compliance requirements, including the correct CE marking.

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT Powerline Adapter Starter Kit

A good fit if you want to bring Wi-Fi to your study through your home’s electrical wiring. The connection depends on your electrical installation and may drop out across different circuits.

View at Joybuy
WiFi Repeater Pro Black

WiFi Repeater Pro Black

A good fit if you want to extend an existing wireless connection to a room further away. Choose a spot where the repeater can still receive a usable signal from the router.

View at Joybuy
TP-Link TL-WA801N wireless access point and Wi-Fi network extender

TP-Link TL-WA801N Wireless Access Point / WiFi Network Extender

A good fit if you have a wired connection to your study and want to provide Wi-Fi there. Check which installation mode you need beforehand.

The product name lists N up to 300 Mbps, 2 antennas, WPS and Passive PoE.

View at Joybuy
TP-Link Deco XE75 tri-band Mesh Wi-Fi 6E

TP-Link Deco XE75 Tri-band Mesh Wi-Fi 6E

A good fit if you need several Wi-Fi points for coverage around your home. Check how many points you’ll need and how they connect to one another.

The product name lists 2.4 GHz, 5 GHz and 6 GHz, and 802.11ax.

View at Joybuy
TP-Link Omada EAP613 wireless access point, white, PoE

TP-Link Omada EAP613 Wireless Access Point, White, PoE

A good fit if you want to add Wi-Fi through an access point. Check which wired installation and power supply will suit your setup.

The product name lists PoE.

View at Joybuy

Frequently asked questions

Does the repeater need to be in the study?

Not necessarily. For a wireless connection, first choose a spot along the way where the router’s signal is still usable. A placement light or app can help. Then test the result in your study.

Will a repeater fix a slow internet connection from my provider?

No, not if the internet connection itself is the problem. First compare a test using an Ethernet cable with the Wi-Fi connection. A repeater is designed to extend wireless coverage inside your home.

What do you need to set up powerline?

For the TP-Link setup described, you’ll need at least two adapters, one of which connects to the router via Ethernet. TP-Link warns that adapters on different electrical circuits may not communicate with each other.

How can I check whether a mesh repeater works with my router?

Check your exact router and the mesh feature on the device you’ve chosen. For example, TP-Link says that OneMesh on the RE505X and RE705X requires a OneMesh router.

What compliance should I check for a wireless device?

Check that the version actually being offered complies with the applicable EU rules and carries the correct CE marking. The Dutch Authority for Digital Infrastructure lists stricter requirements from 1 August 2025 for the wireless equipment concerned. So check the documentation for the exact version, not just the product name.

Do I need a frequency licence for ordinary home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi is exempt from frequency licensing, with no notification or registration required, provided the conditions for that use are met. Being licence-exempt doesn’t mean interference can’t occur.