Who is this relevant for?

Home worker with weak Wi-Fi in their home office

If you back up work documents from a room beyond walls or ceilings, first work out whether the weak link is your home Wi-Fi or your internet connection. The Consumers’ Association (Consumentenbond) points out that walls and ceilings can interfere with the signal.

Home worker who can run a cable

A network cable running to your home office can avoid a wireless connection between the router and an extra Wi-Fi node. Check which type of access point or Ethernet backhaul suits your planned setup; TP-Link describes Ethernet backhaul for the Deco X50.

Home worker with sensitive documents

As well as coverage, consider where work files are stored and which secure working environment your organisation requires. The Dutch Data Protection Authority (Autoriteit Persoonsgegevens) advises taking care when using storage services and handling work documents.

What should you look for when buying?

What to consider What should you check? Who should pay extra attention?
Connection through thick walls Compare the connection by the router with the one in your home office. If you’re using an extra wireless node, check that it gets good reception where you plan to put it. If I’m backing up files from a home office beyond thick walls, I want a usable connection in that room. Around 36% of consumers put coverage first.
Transfer speeds during backups Distinguish between a local backup and a cloud backup, and compare the connection where you work with the one by the router. If you mainly want to transfer files, consider both the connection and the route to the backup location. Around 29% of consumers give transfer speeds the highest priority.
Security of work documents Agree on the storage method with your organisation, and check your devices’ network security settings and updates. If I work with sensitive files, I want to know which storage location and secure working environment are permitted. Around 21% of consumers put document security first.
Installation and equipment required Check whether you need an add-on unit or a complete kit, and how many sockets, ports and cables your setup will require. If you’re looking for a solution that requires little installation, the equipment needed and where it can be placed make a difference. Around 14% of consumers give ease of installation the highest priority.

Common pitfalls

  • Putting a repeater where the signal is almost gone

    The extra node still needs to maintain a connection to the router. If the connection is already weak where you put the repeater, it may remain the limiting factor.

    Check reception where you plan to put the node. If coverage isn’t good enough, also consider a wired connection or powerline.

  • Assuming the maximum speed on the box is your backup speed

    The stated maximum Wi-Fi or powerline speed isn’t a measurement of performance in your home office. Walls, your network environment and, for cloud backups, your internet connection all play a part.

    Compare the connection where you work, and distinguish between a local backup and one made over the internet.

  • Confusing a better Wi-Fi signal with secure storage

    Extending your network doesn’t determine whether a storage location or backup method is permitted for work documents.

    Follow your organisation’s security and storage policies, and keep your network devices up to date.

Brands to compare

TP-Link

According to TP-Link, the Deco X50 range includes mesh kits with different numbers of units and optional Ethernet backhaul.

  • TP-Link specifies three Gigabit ports per Deco X50 and support for Ethernet backhaul.
  • The advertised speed and stated coverage aren’t measurements of backup speeds through the walls in your home. Also note the difference between the Deco X50 and Deco X50-PoE.

FRITZ!

According to FRITZ!, the FRITZ!Repeater 1200 AX is a standalone Wi-Fi 6 repeater with a Gigabit LAN port.

  • The manufacturer says it can be used with other routers; the stated transfer of mesh settings applies specifically to a FRITZ!Box.
  • FRITZ! states that it offers a five-year warranty. Check the terms and the version with the retailer.

devolo

The Magic 2 WiFi 6 next Starter Kit uses powerline to carry the network from an adapter by the router to another room, where the adapter provides Wi-Fi.

  • devolo specifies two Gigabit ports and WPA3 for this Wi-Fi adapter.
  • Advertised maximum speeds don’t guarantee a particular speed over the electrical wiring in a specific home.

Joybuy product picks

The options below are suited to extending a mesh network, using a wired connection between Wi-Fi nodes or extending your network over powerline. For radio equipment placed on the market in the Netherlands, the Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) states that the manufacturer applies the CE mark when the relevant requirements are met; check this for the exact version.

ASUS ZenWiFi BD4 dual-band Wi-Fi 7 mesh system

ASUS ZenWiFi BD4 dual-band (2,4 GHz / 5 GHz), Wi-Fi 7 (802.11be), white

Worth considering if you’re planning a mesh setup with a wired connection between the nodes to avoid sending the wireless signal through the wall.

The product name specifies Wi-Fi 7 (802.11be) and dual-band (2,4 GHz / 5 GHz). Wired backhaul requires a cable between the nodes.

Joybuy
TP-Link TL-WPA7517 KIT powerline adapter starter kit

TP-Link TL-WPA7517 KIT powerline adapter starter kit

A powerline starter kit is worth considering if you want to extend your network to your home office using your existing electrical wiring rather than sending a wireless signal through the wall.

Results depend on your electrical wiring and the sockets you use. Test the connection where you plan to plug in the adapters.

Joybuy
TP-Link TL-WPA7617 KIT powerline kit with 1200 Mbit/s, Ethernet LAN and Wi-Fi

TP-Link TL-WPA7617 KIT 1200 Mbit/s, Ethernet LAN, Wi-Fi, 2 units

This powerline Wi-Fi kit is an option if you want to extend your network to your home office over the electrical wiring.

The product name specifies 1200 Mbit/s and Ethernet LAN. The stated maximum transfer speed isn’t a measurement of backup speeds where you work; results also depend on your electrical wiring.

Joybuy
TP-Link Deco X50-PoE mesh kit with two Wi-Fi 6 units

TP-Link Deco X50-PoE (2-pack), dual-band, Wi-Fi 6 (802.11ax)

This two-unit mesh kit is worth considering if you want to add a Wi-Fi node in several areas of your home.

The product information specifies PoE support and Ethernet ports on each unit. Check that the connections and power supply suit your planned setup.

Joybuy
TP-Link Deco X50 mesh kit with two Wi-Fi 6 units

TP-Link Deco X50 (2-pack), dual-band, Wi-Fi 6 (802.11ax)

This mesh kit is worth considering if you want to position multiple nodes and can run a cable between the units for Ethernet backhaul.

TP-Link specifies three Gigabit ports per Deco X50. Ethernet backhaul is a wired setup and requires a cable between the nodes.

Joybuy

Frequently asked questions

How can you tell whether a Wi-Fi booster will help with your work backups?

First, compare the connection using a cable by the router with the one where you work. If the connection by the router is already too slow for your cloud backup, an extra Wi-Fi node won’t fix that part. If the readings are weak mainly in your home office, look at where you’ve placed the node or consider another way to connect within your home.

Where should you put a wireless Wi-Fi node?

Put the node somewhere it can still get a usable connection to the router, then check reception in your home office. If you can run a cable to a spot nearer your home office, compare using an access point or Ethernet backhaul.

Can you store work documents in your personal cloud or on your own backup drive?

This doesn’t depend on which Wi-Fi device you choose: check with your organisation which storage methods are permitted. The Dutch Data Protection Authority (Autoriteit Persoonsgegevens) recommends using a secure working environment and warns against careless use of storage services, particularly when sensitive personal data is involved.

What should you check about CE marking on a Wi-Fi device?

Check the CE mark on the exact version. The Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) states that the manufacturer applies the mark when radio equipment meets the relevant requirements; the model name alone doesn’t tell you which version you have.