A wireless repeater is mainly an option if there’s a socket in or near the hallway where the router’s signal still reaches, without the device getting in the way. If there’s no suitable spot but you can run a network cable, consider a wired access point near where you’ll be watching. If Wi-Fi coverage is weak in several rooms, a suitable mesh system could be an alternative. First, check whether the buffering is caused by poor Wi-Fi coverage: adding another Wi-Fi point won’t fix a problem with the internet connection itself.
Which solution is right for you?
Viewer with weak Wi-Fi
Your theatre recording keeps buffering in one viewing spot, and you want to know whether a repeater in a suitable place in the hallway can extend the signal. NETGEAR Support recommends placing a repeater within range of the router.
Viewer with the option of a cable
You can’t find a suitable wireless spot in the hallway, but you may be able to run a network cable to an access point near the screen.
Resident with a narrow hallway
You want better Wi-Fi coverage without a plug or device getting in the way. Measure the space around the socket and allow for the room needed to get a usable signal from the router.
What should you look for when choosing?
A single wireless repeater
Suitable if: you mainly want to improve coverage in one viewing spot and have a socket somewhere the router can still reach.
Bear in mind: the wireless connection to the router remains key. The stated maximum speed doesn’t tell you how fast the connection will be in your hallway.
Wired access point
Suitable if: you can run a network cable to the viewing spot but don’t have a suitable place for a wireless repeater.
Bear in mind: you’ll need a cable route and a device with access point mode. Check what the chosen model’s Ethernet port can do.
Mesh system with multiple Wi-Fi points
Suitable if: several rooms have weak coverage and you can place the Wi-Fi points where they can maintain a connection with each other.
Bear in mind: check that the mesh system is compatible with your router. Some features require compatible equipment from the same brand.
| What to consider |
What should you check? |
Who this matters to |
| Usable signal at the intermediate spot |
Check whether the router still has coverage at the intended socket, then test the connection by the screen. |
If I want to improve one viewing spot first, I need to know whether a repeater can receive the signal along the route to it. Around 36% of consumers put reception at the intermediate spot first. |
| Connection while watching |
Test the connection where you’ll be watching and compare a wireless connection with a network cable, if one is an option. |
If I want to avoid buffering during the recording, I’ll check whether I can run a cable to the screen and whether the device supports the setup I want. Around 29% of consumers prioritise a stable viewing connection or a wired alternative. |
| Space in the hallway |
Measure the space around the socket and check the device’s dimensions and positioning. |
If my hallway is narrow, I want to find a suitable spot without blocking the walkway. Around 21% of consumers say keeping the walkway clear is their first requirement. |
| Compatibility and installation |
Check your router model, the mesh features you want and the installation options for the exact model. |
If I want to keep using my existing router, I need to know in advance which features work with it. Around 14% of consumers put compatibility and installation first. |
Common purchasing mistakes
-
Putting the repeater right next to the screen without checking the signal
A wireless repeater still needs to connect to the router. If there’s barely any router signal where you put it, the device won’t solve the problem on its own.
First, find and test an intermediate spot with usable reception. If there isn’t one, check whether a wired access point is an option.
-
Assuming the stated Wi-Fi speed guarantees video quality
A maximum wireless speed doesn’t measure the connection in your home. Placement and coverage where you’ll be watching both matter.
Test the connection by the screen, and don’t compare stated product speeds directly with real-world test results.
-
Assuming mesh will work fully with every router
Brand-specific mesh features may depend on having a compatible router or other devices from the same brand.
Before buying, check your router model and which mesh features work with it. Some brand-specific features may require additional network equipment.
Relevant brands
TP-Link
The RE705X is worth considering if you’re comparing Wi-Fi extenders that offer both wireless and wired placement options.
- TP-Link Netherlands lists a gigabit Ethernet port and access point mode for the RE705X.
- The OneMesh features described require a compatible OneMesh router. The stated band speeds don’t measure the connection in your hallway.
FRITZ!
The FRITZ!Repeater 1200 AX is an option to consider if you’re looking for a compact extender, particularly if you already have a FRITZ!Box.
- FRITZ! lists a gigabit LAN connection and connectivity via LAN or Wi-Fi.
- The automatic transfer of Wi-Fi settings and FRITZ! Mesh compatibility described apply when used with a FRITZ!Box. Using it with another router doesn’t confirm that they’ll work together.
NETGEAR
The EAX15 is a wall-plug extender with internal antennas to consider if space around a socket is limited.
- NETGEAR Netherlands lists a gigabit Ethernet port for this model.
- A compact design doesn’t guarantee that the extender will receive a strong enough signal from your router at the socket in your hallway.
devolo
The WiFi 6 Repeater 3000 is worth considering if you want the option of wireless repeating or using a wired access point.
- devolo lists a gigabit LAN connection, access point mode and mesh compatibility with other devolo Wi-Fi products.
- The manufacturer’s description of installation isn’t an independent test for every home setup.
Products for this situation
This selection includes standalone wireless repeaters, a mesh kit and wired access points. Choose based on reception at the intended spot, the space available in the hallway and whether you can run a network cable.
No image available
TP-Link TL-WA850RE 300 Mbps Universal
A wireless repeater for extending your existing Wi-Fi coverage. Before buying, check that the signal from your router reaches the intended intermediate spot.
The product name states 300 Mbps; this doesn’t measure the connection where you’ll be watching.
View at Joybuy
No image available
TP-Link Deco X50 (3-Pack) Dual-Band (2.4 GHz/5 GHz) Wi-Fi 6 (802.11ax) White
A mesh kit for extending coverage in several places. Plan where to position the units and check compatibility with your existing network before you buy.
The product name lists three units, dual-band at 2.4 GHz and 5 GHz, and Wi-Fi 6.
View at Joybuy
No image available
WiFi Repeater Pro Black
A wireless repeater for extending your existing Wi-Fi coverage. Check that there’s a spot in the hallway where the device can still receive the router’s signal without blocking the walkway.
View at Joybuy
No image available
TP-Link EAP725-Wall 5012 Mbit/s White with Power over Ethernet (PoE)
A wired access point for a spot where you can run a network cable. Check that your planned installation meets the stated PoE power requirements.
The product name lists 5012 Mbit/s and Power over Ethernet (PoE); the stated speed doesn’t measure your connection.
View at Joybuy
No image available
TP-Link TL-WA801N Wireless Access Point/WiFi Network Extender (N up to 300 Mbps, 2 Antennas, WPS, Passive PoE)
The product name describes it as both an access point and a Wi-Fi extender. If you can run a cable, check which mode and power supply are right for your setup.
The product name lists speeds of up to 300 Mbps, two antennas, WPS and Passive PoE.
View at Joybuy
Frequently asked questions
Where should you put a wireless repeater?
Place it somewhere between the router and the viewing spot where it can still receive the router’s signal. NETGEAR Support recommends placing it within the router’s Wi-Fi range. Then test the connection by the screen and keep the hallway clear.
Can an Ethernet port replace the wireless connection through the hallway?
It can if the device supports access point mode and you run a network cable from your home network to the device. Connecting the repeater to the TV with a cable doesn’t automatically replace the wireless connection between the repeater and the router.
What should you check if the recording still buffers after installation?
First, test the connection where you’re watching and check the repeater’s position. If a device close to the router still buffers, investigate the router or internet connection before buying additional Wi-Fi points.
What requirements apply to Wi-Fi repeaters in the Netherlands?
Radio equipment placed on the market in the Netherlands must meet the applicable European product requirements, and compliant equipment must carry the CE marking. The Dutch Authority for Digital Infrastructure outlines these requirements; check the marking and product information for the exact model.
Can you try a repeater bought online at home?
For online consumer purchases, you generally have a statutory 14-day cooling-off period after delivery. ACM ConsuWijzer explains the conditions and exceptions for unpacking and trying out products. Also check the seller’s returns information.