Presenter at the end of the hallway
You occasionally share a presentation from a room with weak Wi-Fi and want to see if one well-placed Wi-Fi point will be enough.
For a single presentation room, a wireless repeater may be suitable, as long as you place it somewhere the connection to your router is still usable. If that isn’t possible but you can safely run a network cable to the room, consider a wired access point or a repeater in LAN mode. A system with multiple Wi-Fi points is mainly worth considering if other rooms also have coverage problems.
You occasionally share a presentation from a room with weak Wi-Fi and want to see if one well-placed Wi-Fi point will be enough.
You can use an existing network socket and would prefer a wired connection to the additional Wi-Fi point over placing it somewhere with a fully wireless connection.
You have poor coverage in more than one room beyond the hallway and want to take the placement and compatibility of the Wi-Fi points into account.
Suitable when: you can find a spot where the router still reaches the repeater well and you mainly want to improve coverage in one room.
Trade-off: the connection between the router and repeater remains wireless, so performance depends on placement and obstacles.
Suitable when: a network cable reaches the room or can be safely run there.
Trade-off: you’ll need a cable route and a device that supports the mode you want. Don’t run a loose cable across a walkway.
Suitable when: other rooms as well as the presentation room need better coverage.
Trade-off: multiple points require more equipment, power sockets and energy. Check that they’ll also work with your router.
Suitable when: running a cable through the hallway isn’t practical and you can’t find a suitable spot with router coverage for a wireless repeater.
Trade-off: the connection runs through your home’s electrical wiring. Test how it works in your home before relying on it for a presentation.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Coverage in the presentation room | Test the connection at both ends of the hallway. If available, use the placement indicator or app, then try giving your presentation from the spot where you’ll actually work. | If I’m presenting in a room beyond the hallway, I want to know whether the signal is usable there without placing the repeater somewhere with poor router coverage. Around 36% of consumers say coverage is their main priority. |
| Connection while sharing | Check whether a LAN connection is possible and test your presentation or video call under normal conditions. Don’t treat a quoted maximum speed as a measurement of performance in your home. | When sharing my screen, I want to avoid the connection dropping out, even if Wi-Fi seems to be available. Around 29% of consumers prioritise a reliable connection during presentations. |
| Placement in a narrow hallway | Check where the power sockets and connections are. Keep any cable route out of the walkway. | In a narrow passage, I want to place a Wi-Fi point without the power socket or cabling getting in the way. Around 21% of consumers prioritise flexible placement. |
| Installation and aftercare | Choose the number of Wi-Fi points to suit the rooms that need coverage. Check the available setup method and warranty terms. | If there’s just one room with a problem, I don’t want to set up or power more equipment than necessary. Around 14% of consumers say management and cost are their main considerations. |
A wirelessly connected repeater still needs to be within range of the router. Otherwise, the connection to the additional Wi-Fi point may remain the weak link.
Find a spot where the connection to the router is usable, then test reception in the presentation room.
A product specification doesn’t tell you how the connection will perform in your narrow hallway or room.
Compare the connection options and test the application where you’ll actually be sharing your presentation.
The number of Wi-Fi points you need depends on how many rooms require coverage. A larger set also means more equipment and higher energy use.
First identify which rooms have poor coverage and whether a wired Wi-Fi point is an option.
TP-Link offers standalone range extenders, including the RE705X, as well as powerline and access point products for other connection options.
According to FRITZ!, the FRITZ!Repeater 1200 AX has a gigabit LAN port and can connect via Wi-Fi or LAN.
devolo offers the WiFi 6 Repeater 5400, which has a free-standing design.
These products suit options involving one wireless repeater, a wired access point, powerline Wi-Fi or multiple mesh Wi-Fi points. The right option depends on coverage, the connections available and how many rooms you want to reach.
No image available
May be suitable if you want to improve Wi-Fi in one room and can find a spot where the repeater still receives a good signal from the router.
No image available
An option for adding a Wi-Fi point via Ethernet if a suitable cable and power route is available.
This variant lists N up to 300 Mbps, two antennas, WPS and Passive PoE.
No image available
May be suitable where you want a wired access point and can install a suitable cable and power route.
The product name lists PoE and 1775 Mbps; this figure doesn’t tell you what connection you’ll get where you present.
No image available
A possible option if you don’t want to run a network cable through the hallway and would rather use your existing electrical wiring.
Performance depends on your electrical wiring. Test the connection in your home before relying on it for a presentation.
No image available
May be suitable if several rooms need better coverage and you want to place mesh Wi-Fi points in more than one location.
The set contains three mesh units, which may be more equipment than you need for a single room with a coverage problem.
Place the repeater somewhere it can still get a good signal from the router and help extend coverage to the presentation room. The Consumentenbond recommends keeping obstacles between Wi-Fi points to a minimum. Then test the connection where you’ll be presenting. The end of an area with poor router coverage isn’t automatically a suitable spot.
Yes, if the model you choose supports the LAN mode you need. FRITZ! says the Repeater 1200 AX supports both Wi-Fi and LAN connections, including when used with a router from another manufacturer. Check the instructions for the exact model and keep any cable out of the walkway.
Test it in advance at the actual location, using the laptop and application you’ll be working with. If you run into problems, first check the placement and your existing network. A quoted maximum wireless speed doesn’t guarantee an uninterrupted presentation.
According to the Rijksinspectie Digitale Infrastructuur, Wi-Fi is exempt from licensing requirements for frequency use, with no notification or registration required when the relevant conditions are met. Being exempt from licensing doesn’t mean interference can’t occur.
Radio equipment placed on the market in the Netherlands must meet the applicable European requirements. When the equipment complies, the manufacturer applies the required CE marking. Applicable cybersecurity requirements have also applied to the radio equipment concerned since 1 August 2025. According to ACM ConsuWijzer, the statutory warranty depends on what you could reasonably expect from the product under normal use. Seller or manufacturer warranties may also apply.