Who is this relevant for?

Watching in a distant study

You want to watch a recording in a fixed spot and need to work out whether the weak connection is down to Wi-Fi coverage or your internet connection. The Dutch Consumers' Association recommends trying a spot closer to the centre of the house if reception is weak at the back.

Household without an Ethernet cable

You can’t run a cable to the study and need to find a spot between the router and the room where a wireless repeater can still receive the router’s signal.

Household with several rooms with weak signal

You want to extend coverage to more than one spot, so you’ll need to consider where to place multiple Wi-Fi points and whether your devices are compatible.

What should you look for when choosing?

Wireless Wi-Fi repeater

Choose this option if: you mainly need coverage in the study, can’t run a cable and can find a spot with a strong enough router signal.

Bear in mind: the connection between the repeater and router matters. Placing it in the room with the weakest signal won’t fix a weak incoming signal.

Wired access point

Choose this option if: there’s a usable Ethernet cable in or near the study and the device supports access point mode.

Bear in mind: an Ethernet port alone doesn’t mean the device is wired to the router; you’ll need a cable route for that.

Compatible mesh system

Choose this option if: several rooms need coverage, or you want to extend an existing mesh network that’s confirmed to be compatible.

Bear in mind: compatibility between brands and product ranges matters. Wireless mesh points also need to be positioned well and connected to one another.

The Dutch Consumers' Association recommends placing a repeater closer to the centre of the house if reception is weak at the back. Then measure the signal at the device you’ll be watching on. This will show whether the chosen location and connection are good enough for your viewing needs.

What to consider What to look for Who should pay particular attention?
Connection where you watch Measure the connection at the device you’ll be watching on and compare the result with the requirements of your video service and picture quality. If I mainly want to play a recording in one fixed spot, I want to know whether the connection there is good enough; around 36% of consumers prioritise stable playback in that spot.
Wireless coverage Find a spot in between and check whether the repeater can still receive the router’s signal there. If you can’t run a cable to the study, you’ll need wireless coverage from a suitable midway spot; around 29% of consumers make this their top priority.
Existing Ethernet cable Check that the Ethernet port and exact model support a wired connection and access point mode. If I already have a cable to the study, I want to use it for an access point; around 21% of consumers prioritise existing cabling.
Several rooms Check the brand, product range and whether your router supports the mesh feature. If several rooms have weak reception, I want to know whether the Wi-Fi points can work together; around 14% of consumers focus primarily on coverage in several rooms.

Common buying mistakes

  • Plugging the repeater in where the router signal is barely reaching

    A repeater needs to receive a usable connection from the router before it can pass that signal on.

    Check sockets along the way using a signal indicator or by measuring the signal. If there’s no suitable wireless spot, see whether a wired access point is an option.

  • Assuming the stated Mbps rating is the guaranteed streaming speed

    Your viewing experience also depends on the connection where you watch and the video service you use.

    Measure the connection at the device you’ll be watching on, and use speed recommendations only for the service and picture quality they were published for.

  • Assuming every repeater automatically creates a mesh network with your router

    OneMesh, FRITZ! Mesh and AiMesh each have their own compatibility requirements.

    Check your router model and the mesh feature it supports; assess standard repeater functionality separately.

Brands to compare

TP-Link

The RE605X is a Wi-Fi 6 repeater for extending coverage to a weak spot. According to TP-Link, it can also be used as an access point.

  • The specifications list a signal indicator, gigabit Ethernet and access point mode.
  • OneMesh with a single network name requires a compatible OneMesh router. The listed features don’t tell you what speed you’ll get where you watch.

FRITZ!

The FRITZ!Repeater 1200 AX is worth considering if you want to extend a FRITZ! network or are looking at a LAN connection.

  • FRITZ! lists Wi-Fi 6 and one gigabit LAN port.
  • Automatic FRITZ! Mesh integration requires a FRITZ!Box running FRITZ!OS 7 or later. Don’t assume it will work with another router.

devolo

According to devolo, the WiFi 6 Repeater 3000 can be used as either a repeater or an access point.

  • The manufacturer lists a gigabit LAN connection and mesh support with other devolo Wi-Fi products.
  • A stated maximum transfer speed isn’t the same as a measured speed where you watch.

ASUS

The RP-AX58 is a Wi-Fi 6 repeater to consider if you already have an AiMesh-compatible router.

  • ASUS lists compatibility with various routers.
  • AiMesh requires a compatible router. ASUS also warns that 160 MHz in the 5GHz band may be restricted in some countries.

Joybuy product picks

These Joybuy product picks range from a standalone wireless repeater and a wired access point to mesh systems. Choose based on the cabling available and how many rooms need coverage.

Wi-Fi Repeater Pro Black

Wi-Fi Repeater Pro Black

A wireless repeater for extending your existing network to a weak spot. Check that the repeater can still receive the router’s signal where you plan to put it.

The description lists 2.4 GHz Wi-Fi and an indicator light to help with setup.

View at Joybuy
TP-Link TL-WA801N Wireless Access Point/WiFi Network Extender

TP-Link TL-WA801N

An option for a wired access point if there’s a network connection in or near the study; the description also lists repeater functionality.

2.4 GHz, up to 300 Mbps according to the product name, 10/100 Mbit/s Ethernet ports and Passive PoE. A wired access point setup requires an Ethernet connection.

View at Joybuy
TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 2-Pack

A mesh system rather than a standalone repeater, for anyone considering a mesh setup.

The product description lists tri-band mesh Wi-Fi and Ethernet ports on each unit.

View at Joybuy
ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7, white

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7, White, 2 Internal

A mesh system, not a standalone repeater. Consider this option if you’re looking for a mesh setup.

The product name lists dual-band Wi-Fi on 2.4 and 5 GHz and Wi-Fi 7. The description mentions a wired backhaul option.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 3-Pack Dual-Band Wi-Fi 6, White

A mesh set with three units for a setup with multiple Wi-Fi points; it isn’t a standalone Wi-Fi repeater.

The description lists dual-band Wi-Fi 6 and Ethernet ports on each unit.

View at Joybuy

Frequently asked questions

Where should you place a wireless repeater for a distant study?

Put it somewhere in between where it can still receive a usable signal from the router, rather than automatically placing it in the room with the weakest reception. The Dutch Consumers' Association recommends choosing a spot closer to the centre of the house if reception is weak at the back, and suggests using a signal light or app to help with placement.

Will an Ethernet port always stop playback from stuttering?

No, not by itself. You can connect a viewing device to a wireless repeater with a cable while the repeater itself remains connected to the router wirelessly. If there’s a cable to the router, check whether the model you choose can work as a wired access point.

What speed does a theatre recording need?

It depends on the video service and picture quality. Netflix’s recommendations apply only if you’re watching through Netflix: at least 5 Mbps for 1080p and 15 Mbps for 4K. These recommendations are specific to that service; they don’t guarantee a repeater’s performance.

Will any Wi-Fi repeater work with my mesh router?

No. Mesh integration depends on a compatible router and product range. For example, check whether your router supports the specific OneMesh, FRITZ! Mesh or AiMesh feature. Standard repeater functionality is separate.

What should you look for on the CE marking of a Wi-Fi repeater in the Netherlands?

Radio equipment sold in the Netherlands must meet the applicable European requirements and carry the required CE marking. The Dutch Authority for Digital Infrastructure explains that the marking applies to equipment that meets the requirements, so check the specific version actually being offered.