Who is this relevant for?

For viewers with one room with weak Wi-Fi

Your cooking class keeps buffering, especially in your home office. You want to know whether a repeater placed somewhere with a good enough signal can extend your router’s existing Wi-Fi to that room.

For viewers with an Ethernet cable

You can run a cable to your workspace and want to decide whether a wired access point would suit you better than an extra wireless connection between the router and the room.

For homes with Wi-Fi problems in several areas

The home office isn’t the only place with weak Wi-Fi. You need coverage in more areas and want to check whether an extension will work with your existing router or mesh system.

What should you look for?

Start by identifying the cause and checking what cabling is available. A wireless repeater, a wired access point and a mesh extension are suited to different coverage needs.

A single wireless repeater

A good fit if: one room in particular has weak Wi-Fi and there’s a spot between the router and that room where the repeater can still receive a usable signal.

Bear in mind: the connection between the repeater and the router; the stated maximum Wi-Fi speed isn’t a measure of how well your cooking class will stream.

A wired access point

A good fit if: an Ethernet cable runs to or close to your home office.

Bear in mind: the cable route and choosing a device that supports access point mode; also check the connection and the version being offered.

A compatible mesh extension

A good fit if: you need coverage in several areas or want to expand your system with a mesh product that works with your router.

Bear in mind: mesh features depend on the router, product version and supported standard. Additional Wi-Fi points also need power.

What to consider What should you look for? Who is this important for?
Coverage to the home office Compare reception by the router, where you plan to place the repeater and where you’ll be watching. If one room in particular is disrupting my cooking class, I want to know where a repeater can still receive a usable signal from the router; around 36% of consumers prioritise coverage in one specific viewing area.
Wired connection Check that the cable connects to your existing network and that the device supports access point mode. If there’s a cable running to my workspace, I want to be able to use it to extend Wi-Fi; around 29% of consumers prioritise the stability of a wired connection.
Several rooms and mesh Check your router model and, where relevant, the hardware version and supported mesh feature. If Wi-Fi is weak in several areas, I’m looking for an extension that works with my existing equipment; around 21% of consumers focus mainly on coverage in several rooms.
Management and power consumption Check which firmware updates are available and the stated power consumption of the version being offered. Once coverage is sorted, I want to be able to maintain the extra Wi-Fi point and factor in its power consumption; around 14% of consumers prioritise management and ongoing running costs.

Common buying mistakes

  • Placing the repeater where reception is at its worst

    A repeater needs to receive a usable signal from the router before it can extend Wi-Fi to your home office.

    First, find an intermediate spot with good enough reception, then test your cooking class where you’ll be watching.

  • Assuming a high stated Wi-Fi speed is the speed of your video lesson

    A maximum wireless speed isn’t a measure of the connection in your home. The position of your router and interference can also affect performance.

    Check the connection where you’ll be watching and compare the installation and connection options you need.

  • Assuming basic Wi-Fi extension means full mesh compatibility

    A device may extend Wi-Fi without offering the same mesh features with every router. For the TP-Link RE705X, manufacturer documents list different mesh names in different product documents.

    Before you buy, check the exact router, hardware version and supported mesh feature.

  • Considering installation and nothing else

    An extra Wi-Fi point often stays switched on for a long time. If you rent one, different terms may apply than if you buy one.

    Check the power consumption and any rental terms for the solution you’re actually considering.

    An extra point uses power continuously; if you rent the device, the provider’s terms may also apply.

Brands to compare

TP-Link

  • TP-Link says the RE705X can be used as a repeater or in access point mode via its gigabit port.
  • The product page mentions OneMesh, while documentation for RE705X(EU) 2.0 mentions EasyMesh. Check the hardware version being offered and its compatibility with your router.
  • FRITZ!

    The FRITZ!Repeater 1200 AX may suit an existing FRITZ!Box and, according to the manufacturer, can also be used with other routers.

    • FRITZ! lists Wi-Fi 6, a gigabit LAN port and mesh integration with a FRITZ!Box.
    • Using it with a router from another brand doesn’t automatically mean you’ll get the same FRITZ! mesh integration.

    NETGEAR

    The EAX15 is a plug-in extension for anyone looking into adding a single Wi-Fi point while keeping their existing Wi-Fi.

    • NETGEAR lists a gigabit Ethernet port and set-up via the Nighthawk app.
    • Claims about coverage or streaming speed aren’t a measurement of performance in your home office; check the version being offered too.

    devolo

    The WiFi 6 Repeater 5400 is an option to compare if you’re looking for a repeater you can place freely or already use devolo Wi-Fi products.

    • devolo lists a signal indicator, WPS set-up and mesh with other devolo Wi-Fi products.
    • The stated maximum data rate won’t predict the actual connection during your cooking class; don’t assume it’s compatible with other brands’ mesh systems unless this is confirmed.

    Products at Joybuy

    These product picks cover three ways to get Wi-Fi in your home office: a mesh extension, a wired access point and a wireless repeater. Before you buy, check that the features and connections suit your existing network and the version being offered.

    TP-Link Deco X50 mesh Wi-Fi system, 3-pack

    TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

    Suited to plans to extend Wi-Fi around the home with several mesh points; this doesn’t confirm the connection quality where you’ll be watching your cooking class.

    3 units; dual-band (2,4 GHz/5 GHz); Wi-Fi 6 (802.11ax); three gigabit Ethernet ports per unit.

    View at Joybuy
    TP-Link Deco X50-PoE mesh Wi-Fi system, 3-pack

    TP-Link Deco X50-PoE, 3-pack, dual-band Wi-Fi 6

    Suited to a mesh set-up with a wired backhaul or wired placement, if PoE support works with your installation.

    3 units; dual-band (2,4 GHz/5 GHz); Wi-Fi 6 (802.11ax); PoE support; two Ethernet ports per unit.

    View at Joybuy
    Ubiquiti UniFi AP U7 Long-Range access point

    Ubiquiti UniFi AP U7 Long-Range

    Suited to the wired access point option if you can use a compatible installation and manage it through UniFi Network.

    Wi-Fi 7; 2,4 and 5 GHz bands; 2,5-gigabit Ethernet uplink; powered via PoE+ (802.3at); managed through the UniFi Network platform.

    View at Joybuy
    Wi-Fi Repeater Pro Black

    Wifi Repeater Pro Black

    Suited to anyone looking to extend Wi-Fi wirelessly to one area and use the Mi app to set it up.

    2,4GHz Wi-Fi.

    View at Joybuy
    TP-Link TL-WA801N access point and Wi-Fi extender

    TP-Link TL-WA801N access point and Wi-Fi extender

    Suited to a wired access point or repeater set-up if the listed modes and connections work with your network.

    2,4GHz Wi-Fi; N up to 300 Mbps; two antennas; WPS; passive PoE.

    View at Joybuy

    Frequently asked questions

    How do I know if I need a repeater?

    Compare the connection near the router with the one where you’ll be watching. Also check the router’s position and Wi-Fi channel, which the Dutch Authority for Digital Infrastructure lists as factors that can cause poor coverage or drop-outs. If your cooking class also buffers close to the router, check your internet connection or router first.

    Where should I place a wireless repeater?

    Place the repeater somewhere it can still receive a usable signal from the router, rather than automatically putting it next to your screen. If available, use the signal indicator or set-up app, then check the connection where you’ll be watching.

    Will mesh automatically work with my existing router?

    No. Check the combination of router, repeater, hardware version and supported mesh feature. TP-Link lists different mesh names for the RE705X in manufacturer documents; FRITZ! describes mesh integration with a FRITZ!Box.

    When is a wired access point a better choice than a wireless repeater?

    A wired access point may be a good fit if an Ethernet cable runs to or close to your home office and the Wi-Fi signal becomes too weak on the way there. Check that your chosen device supports access point mode and that the cable can connect to your existing network.

    What marking should I check on a Wi-Fi repeater?

    The Dutch Authority for Digital Infrastructure says that radio equipment placed on the Dutch market under European radio equipment requirements must meet the applicable requirements and carry a CE marking. Check the marking on the version actually being offered; on its own, it says nothing about Wi-Fi performance in your home.