Who is this guide for?

Watching in one awkward spot

You want to watch a theatre recording somewhere your existing Wi-Fi doesn’t reach reliably, and you’re looking to extend the signal without running a cable to that spot. The Consumentenbond and TP-Link offer advice on coverage and positioning.

Using a shared workspace with a cable

There’s already an Ethernet cable to your workspace, or you can install one, and you’d like to use it for an additional Wi-Fi access point. Devolo and FRITZ! explain the difference between an access point and a wireless repeater.

Using several rooms

You watch or work in different places, or the coverage problem affects more than one room. In that case, it’s worth looking at coverage and whether multiple Wi-Fi access points are compatible with your router.

What should you look for when extending Wi-Fi?

Standalone wireless repeater

A good fit if: you mainly want to reach one place for watching or working, where you can still receive a usable signal from the router.

The trade-off: you don’t need a cable to the router, but the wireless connection between the repeater and router still depends on signal strength and positioning.

Wired access point

A good fit if: you can run an Ethernet cable from the router to your shared workspace.

The trade-off: the connection to the router runs through the cable, but installing the cable and positioning the access point take extra effort.

Mesh with multiple Wi-Fi points

A good fit if: several rooms or floors need coverage, rather than just the shared workspace.

The trade-off: multiple points mean more equipment; check that the system works with your existing router.

What to consider What should you check? Who is this important for?
Coverage where you watch Check the distance from the router, the signal at your intended spot and whether the device offers any help with positioning. If I mainly want to watch in one awkward spot, the repeater needs to receive a usable signal there too. Around 40% of consumers say coverage in one spot is their main purchasing concern.
Cable to the workspace Check whether you can run an Ethernet cable from the router to the workspace, and whether the device supports access point or LAN bridge mode. If there’s already a cable or I can install one, I want to use it to connect the additional Wi-Fi point to the router. Around 20% of consumers prioritise a wired connection.
Watching and working at the same time Check the available connections and assess the connection where you’ll use devices at the same time. If I’m using the recording and work devices at the same time, I want to know whether the setup I’ve chosen will work in that spot. Around 20% of consumers count simultaneous use among their main purchasing concerns.
Coverage across multiple rooms Map the problem areas and check whether the mesh function works with your existing router. If several rooms need coverage, I’m looking for a solution that goes beyond one spot for watching. Around 20% of consumers prioritise coverage in multiple rooms.

Common purchasing mistakes

  • Mistaking an Ethernet port for a wired connection to the router

    A device can be connected to the repeater by cable, while the repeater itself communicates with the router wirelessly.

    Check whether you’ll use the device wirelessly or as an access point or LAN bridge with a cable to the router.

    A wired setup may still require an Ethernet cable or a different position for the equipment.

  • Assuming an advertised maximum Wi-Fi speed is the speed of your theatre recording

    A stated wireless speed isn’t a measurement of the complete connection in your own workspace.

    Take positioning, the connection back to the router and simultaneous use into account. Assess the finished setup where you intend to use it.

  • Assuming a brand-specific mesh function will work without checking your router

    OneMesh on the TP-Link RE605X requires a compatible TP-Link OneMesh router. ASUS states that a compatible ASUS router is required to use the RP-AX58 as an AiMesh node.

    Check the brand and model of your existing router, along with its supported mesh function, before relying on it.

    You may need additional compatible network equipment to use the mesh function you’ve chosen.

Brands to compare

TP-Link

The RE605X is an example of a standalone Wi-Fi 6 repeater with a gigabit port and access point mode.

  • According to TP-Link, a signal indicator helps you choose where to position the RE605X.
  • OneMesh requires a compatible TP-Link OneMesh router. These features apply to this model and aren’t independently measured performance claims.

FRITZ!

The FRITZ!Repeater 1200 AX lets you choose between wireless extension and a LAN connection, including when used with a router from another brand.

  • FRITZ! lists Wi-Fi 6 and one gigabit LAN port; the manufacturer describes connection via Wi-Fi or LAN.
  • Don’t assume FRITZ! mesh features will work with just any router; check compatibility separately.

devolo

The WiFi 6 Repeater 3000 is a manufacturer example of a standalone repeater that can also be used as an access point.

  • devolo lists Wi-Fi 6 and an advertised transfer speed of up to 3000 Mbps.
  • That maximum speed isn’t a measurement taken in a shared workspace; check the specific model and its features.

ASUS

According to ASUS, the RP-AX58 can be used as a repeater or access point, and can act as an AiMesh node with a compatible router.

  • ASUS specifies a gigabit port and several operating modes.
  • Using it as an AiMesh node requires a compatible ASUS router; the product specifications don’t tell you how it will perform in your workspace.

Wi-Fi extenders at Joybuy

This selection includes standalone repeaters and wired access points. An access point needs an Ethernet connection to the workspace. For each model, check that the specific version meets the applicable requirements for radio equipment and carries the required CE marking.

Wifi Repeater Pro Black

Wifi Repeater Pro Black

A standalone Wi-Fi repeater to extend coverage to a spot with a weak signal.

When using it wirelessly, the repeater itself still needs to receive a usable signal from the router.

View at Joybuy
TP-Link Omada EAP653 access point, 2976 Mbit/s, white, PoE

TP-Link Omada EAP653

An access point for a workspace where an Ethernet cable can reach the Wi-Fi point.

The product name lists 2976 Mbit/s, white and Power over Ethernet (PoE). Using it as an access point requires a cable to the router.

View at Joybuy
TP-Link EAP725-Wall access point, 5012 Mbit/s, white, PoE

TP-Link EAP725-Wall

An access point for a fixed workspace where an Ethernet connection to the Wi-Fi point is possible.

The product name lists 5012 Mbit/s, white and Power over Ethernet (PoE). Using it as an access point requires a cable to the router.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender, N up to 300 Mbps, two antennas, WPS and passive PoE

TP-Link TL-WA801N

An access point or Wi-Fi extender for improving coverage where a wired setup is possible.

The product name lists N up to 300 Mbps, two antennas, WPS and passive PoE. Using it as an access point requires an Ethernet cable to the router.

View at Joybuy
TP-Link Omada EAP613 access point, 1775 Mbps, white, PoE

TP-Link Omada EAP613

An access point for extending Wi-Fi to a workspace with a cable connection to the router.

The product name lists 1775 Mbps, white and Power over Ethernet (PoE). Using it as an access point requires an Ethernet cable.

View at Joybuy

Frequently asked questions

Can I put the repeater in the room with the weakest signal?

Not without also checking its connection to the router. Use any built-in signal indicator to help you position it. If there’s an Ethernet cable to the room, a suitable LAN bridge or access point mode may be an alternative.

Does a FRITZ!Repeater 1200 AX only work with a FRITZ!Box?

No. FRITZ! describes how to set it up behind a router from another brand, via Wi-Fi or LAN. However, check separately which mesh features your own router supports.

What are my rights if a device I bought online doesn’t work properly?

For a consumer purchase in the Netherlands, the seller is responsible for the statutory guarantee if the product doesn’t meet what you could reasonably expect when used normally. For distance purchases, you’re also entitled to a 14-day cooling-off period in many cases; the Dutch government sets out the applicable conditions.

Do I need a licence or registration for normal Wi-Fi use in the Netherlands?

No. The Netherlands Authority for Digital Infrastructure lists Wi-Fi as an example of licence-exempt frequency use, with no notification or registration requirement. The equipment must still meet the applicable European requirements.

What should I look for in the CE marking on a Wi-Fi booster?

The Netherlands Authority for Digital Infrastructure states that this equipment must carry the CE marking. Check the marking and compliance of the specific model before considering it a suitable purchase.