Who is this choice relevant to?

Workshop attendee with a weak signal

You attend the workshop at the end of the corridor and are looking for a solution to improve Wi-Fi in that fixed location.

Attendee who can run a cable

You can run ethernet to the workshop and want to see whether a wired access point would work there.

User of an existing mesh network

You want to extend your network and first check which mesh features work with your router and the model you choose.

What should you look for when choosing?

Start by looking at the connection between your router and the workshop: choose a wireless repeater if there’s a suitable spot in between, or consider a wired access point if you can run an ethernet cable.

Wireless Wi-Fi repeater

Choose this option if: you don’t want to run a cable and there’s a socket halfway along the corridor where the repeater can still receive a good signal from the router.

Bear in mind: the connection to the router remains wireless and depends on signal strength and obstacles.

Wired access point

Choose this option if: you can run an ethernet cable to the far end of the corridor and want to provide Wi-Fi there.

Bear in mind: you’ll need a cable run and a device with access point mode.

Check your existing connection first

Choose this option if: the workshop connection also drops out near the router, or you’re not yet sure where the connection problems are occurring.

Bear in mind: a repeater extends your coverage, but won’t fix a problem with your internet connection itself.

What to consider What to look for when buying Who is this important to?
Range and positioning Find a socket where the router’s signal is still good; don’t place the repeater in the room where there’s no signal. When I attend a workshop at the end of the corridor, I want Wi-Fi there without placing the repeater out of range of the router. Around 36% of consumers say range and positioning are their top priority.
Video call reliability Compare the connection near the router with the one at the workshop, and check whether a wired access point is an option. During a live workshop, I want the picture and sound to remain clear. Around 29% of consumers put call reliability first.
Router and mesh compatibility Check support for your router and the specific mesh combination; don’t rely on the word ‘mesh’ alone. If I want to extend my existing network, I want to know which features work with my router. Around 21% of consumers put compatibility first.
Running costs and support Check the stated power consumption, any cables you may need, updates and warranty terms. For a device that stays on for long periods, I want to take running costs and support into account. Around 14% of consumers say these are their main concerns when buying.

Pitfalls when extending your Wi-Fi

  • Placing the repeater in a room with no signal from the router

    A repeater needs to receive a signal from the router itself. The Consumentenbond advises placing the booster somewhere the signal is still good.

    First, find a spot in between with a socket and a usable signal. If there isn’t one, see whether a wired access point is feasible.

  • Assuming the stated Wi-Fi speed is the speed you’ll get during your workshop

    A product’s stated speed doesn’t automatically predict the connection you’ll get at the end of your corridor. Your internet connection and any obstacles also matter; the Consumentenbond notes that the Wi-Fi version alone doesn’t determine performance.

    Compare the connection at the workshop with a test using a network cable by the router to find out where the problem starts.

  • Assuming every mesh device works fully with every router

    Manufacturers describe mesh features for specific product combinations, alongside more general use as a repeater.

    Check mesh support for your router and the exact repeater model before relying on those features.

Relevant brands to consider

TP-Link

According to TP-Link Netherlands, the RE705X is an example of a Wi-Fi 6 repeater with gigabit ethernet and access point mode.

  • TP-Link describes the RE705X as suitable for use with Wi-Fi routers in general.
  • The OneMesh integration described is a separate feature and doesn’t automatically work with every router. The stated band speeds are product specifications, not measured speeds at your workshop.

FRITZ!

The FRITZ!Repeater 1200 AX is worth considering if you already use a FRITZ!Box and want to assess mesh integration.

  • FRITZ! lists a gigabit LAN connection for this model and says it can be used with other routers.
  • Full FRITZ! Mesh compatibility is specifically described for use with a FRITZ!Box. The manufacturer’s warranty is separate from your statutory rights.

devolo

The WiFi 6 Repeater 5400 is a model you can place freely, with a signal indicator; devolo also describes an alternative in access point mode.

  • devolo says it is compatible with Wi-Fi routers in general, and offers mesh functionality with other devolo products.
  • The stated maximum data rate isn’t a measurement of the connection at the end of your corridor.

Joybuy products for your workshop

This selection includes both wired access points and wireless repeaters. Choose based on the available cable route and where the device can still connect to the router. The Dutch Authority for Digital Infrastructure states that radio equipment sold in the Netherlands must meet the applicable requirements and carry a CE marking; check this for the specific model.

Ubiquiti UniFi AP U7 Long-Range access point

Ubiquiti UniFi AP U7 Long-Range

Worth considering if you can run ethernet to the far end and want to install an access point there.

Compatible PoE+ equipment is required to power it.

View at Joybuy
WiFi Repeater Pro Black

Wifi Repeater Pro Black

Worth considering if you want to extend your network wirelessly and can first find a spot in between with a signal from your existing network.

A repeater placed somewhere with no usable signal from the router won’t fix the connection to the router.

View at Joybuy
TP-Link Omada EAP653 wireless access point

TP-Link Omada EAP653

A good fit for a wired setup if you want to connect an access point at the far end.

This setup requires an ethernet connection to the access point’s location.

View at Joybuy
TP-Link Omada EAP673-Extender network repeater

TP-Link Omada EAP673-Extender

Worth considering if you’re looking for a wireless repeater and can place the device within range of your existing network.

It must be placed within range of your existing network.

View at Joybuy
TP-Link TL-WA801N Wi-Fi access point and network extender

TP-Link TL-WA801N

The product name describes it as both a Wi-Fi access point and a network extender, so you can compare the intended connection method with your setup.

The product name lists N up to 300 Mbps, 2 antennas, WPS and Passive PoE.

A wired access point setup requires an ethernet cable run to the device’s location.

View at Joybuy

Frequently asked questions

Where should you place a repeater for a workshop at the end of the corridor?

Start roughly halfway between the router and the workshop, somewhere the repeater can still get a good connection to the router. Check the signal indicator there, then test the connection at the spot where you’ll be sitting.

Will an ethernet cable from your laptop to a wireless repeater always help?

No. It won’t automatically fix a weak wireless connection between the repeater and the router. In access point mode, the cable runs from your home network to the access point; check which connection methods your chosen model supports.

What should you check if the call still drops out after installation?

Compare the connection at the workshop with a test using a network cable by the router. If your wired internet connection is repeatedly slow too, contact your provider; a repeater won’t increase the speed supplied by your provider.

Do you need an extended warranty or the fastest Wi-Fi class?

Not necessarily. Compare the features with your router and devices, and check the power consumption. According to ACM ConsuWijzer, in the Netherlands you have statutory rights as well as any manufacturer’s warranty: the seller must provide a product that meets what you can reasonably expect from it.

Can you use a Wi-Fi repeater at home in the Netherlands, and what should you look for when buying?

According to the Dutch Authority for Digital Infrastructure, you can use Wi-Fi at home without a licence as long as you follow the rules for the designated frequencies and their use. Radio equipment sold in the Netherlands must meet the applicable requirements and carry a CE marking; check the marking on the specific model and follow the instructions.