First, test the Wi-Fi where you’ll be presenting: a new router won’t automatically give you a usable connection behind thick walls. If you can run an Ethernet cable to that room, a wired access point or mesh node with Ethernet backhaul can avoid relying on a wireless connection between rooms. Without a cable, wireless mesh and powerline performance depend on where you place the nodes and on your electrical wiring. Also check separately that your laptop and screen support your preferred presentation method.
Who is this relevant to?
Presenting in a room behind thick walls
You want to know whether you need an extra Wi-Fi access point to get a usable connection on your laptop or presentation screen. The Consumers’ Association recommends first looking at ways to improve your existing Wi-Fi.
A cable can be run between the rooms
You can run an Ethernet cable to the other room and are looking for a suitable extra Wi-Fi access point and the right connection or operating mode. TP-Link and ASUS document Ethernet backhaul options.
Running an Ethernet cable isn’t possible
You want to know whether wireless mesh or powerline is suitable for where you can place the nodes and for your electrical wiring. TP-Link describes both connection options, including the conditions for powerline.
What should you consider when choosing?
For a presentation behind thick internal walls, the location of the extra Wi-Fi access point and its connection to your existing router are key considerations. Then check that your devices and the system you choose support your presentation method.
Keep your existing router
Choose this if: the connection is usable where you’re presenting after adjusting the placement or settings.
Trade-off: no Wi-Fi access point is moved closer to the room behind the wall.
Wired access point or mesh
Choose this if: you can run an Ethernet cable to the presentation room and need Wi-Fi there.
Trade-off: you’ll need to check the cable route, ports and connection to your existing router. Installing the cable takes extra work.
Wireless mesh
Choose this if: you can’t run a cable, but can place an extra node somewhere it still gets a usable wireless connection to the main network.
Trade-off: the connection between nodes still depends on the walls and where they’re placed; coverage isn’t guaranteed.
Mesh with powerline backhaul
Choose this if: you can’t run an Ethernet cable and have suitable sockets on the electrical circuit.
Trade-off: performance depends on your electrical wiring and whether the nodes are compatible. For example, TP-Link says the Deco PX50 doesn’t work with the PX10, P9 or P7 for powerline backhaul.
| What to consider |
What should you check? |
Who is this important for? |
| Coverage where you’re presenting |
Test the connection in the room itself and work out where you could place an extra Wi-Fi access point. |
If I’m presenting behind a thick wall, I want to know whether the connection will be usable on my laptop or screen. Around 36% of consumers prioritise coverage where they’re presenting. |
| Connection between rooms |
Check whether Ethernet backhaul, wireless mesh or powerline is suitable for the cable route and your installation. |
If I need a stable connection between the router and presentation room, I want to know how the extra node will connect to the network. Around 29% of consumers put the connection between rooms first. |
| Connecting to your devices |
Check the Wi-Fi access point’s operating mode and ports, and the projection method supported by your laptop and screen. |
If I want to project wirelessly to a screen, I want to know whether my devices support that method. Around 21% of consumers give compatibility with their existing equipment top priority. |
| Size of the system |
Test your existing Wi-Fi first and work out how many nodes you need to cover the rooms in question. |
If I want to avoid unnecessary equipment, I want to know first whether adjustments to my current network will be enough. Around 14% of consumers prioritise the size of the system they need. |
Common buying mistakes
-
Assuming a high advertised Wi-Fi speed guarantees good coverage
The advertised capacity doesn’t automatically tell you whether the connection will be usable in the room behind the wall.
Test the connection where you’ll be presenting, then look at how you can connect the network nodes.
-
Placing a wireless mesh node where the main network barely reaches
An extra node also needs a usable connection to the rest of the network.
Check where you place it. If the wall is blocking the wireless connection, find out whether Ethernet backhaul is an option.
-
Treating powerline mesh as a guaranteed substitute for a cable
According to TP-Link, extension leads, different electrical distribution boards and other equipment can all affect the powerline connection.
Check your electrical setup and test the connection with the devices in their intended locations.
-
Buying a router to fix an unsupported screen-projection method
For the Windows projection to a wireless display described by Microsoft, the screen must support Miracast or you’ll need a suitable adapter.
Check your laptop, screen and projection method separately from your choice of network equipment.
You may still need a suitable screen adapter.
Brands to consider
TP-Link
The Deco range includes models with Ethernet backhaul and powerline backhaul. The right connection depends on how you can connect the nodes.
- TP-Link explains how to connect satellite Deco units by cable in access point mode.
- The manufacturer says the Deco PX50 doesn’t work with the Deco PX10, P9 or P7 for powerline backhaul.
ASUS
AiMesh and ZenWiFi offer options for connecting compatible nodes by cable, with a network switch if needed.
- ASUS documents Ethernet backhaul and setup in access point mode.
- Check support and ports for each model. With a managed switch, the port settings may also matter.
FRITZ!
The FRITZ!Mesh Set 2700 is designed to extend an existing router’s network. According to the manufacturer, this can also be a router from another brand.
- FRITZ! says the set can be connected to a router or ONT via LAN.
- Check which version and how many nodes you need. A manufacturer’s coverage claim can’t predict how Wi-Fi will perform behind the walls in your home.
Joybuy products
This selection of Joybuy products includes mesh systems, powerline Wi-Fi and wired access points for getting Wi-Fi in another room.
No image available
TP-Link Deco BE68 (2-pack)
A mesh system with two nodes and support for wired and wireless backhaul. Check which placement and connection work for your home.
Tri-band Wi-Fi. Each node is listed with WAN/LAN ports rated at 10, 2.5 and 1 Gbps.
Joybuy
No image available
ASUS ZenWiFi BT8 (2-pack)
A mesh system with two nodes for Wi-Fi across multiple rooms. Check that the intended connection is compatible with your existing network.
Tri-band Wi-Fi 7 (802.11be), with 2.5 Gbps and 1 Gbps Ethernet ports. The product description mentions AiMesh integration.
Joybuy
No image available
TP-Link TL-WPA7517 powerline starter kit
A powerline Wi-Fi kit that extends your network using your home’s electrical wiring. Performance depends on the electrical installation.
The product description lists a Type E plug and powerline, Wi-Fi and LAN indicators.
Joybuy
No image available
TP-Link Deco M4 (3-pack)
A mesh system with three units for Wi-Fi in multiple areas. Check where the units can maintain a usable connection to each other.
Dual-band Wi-Fi 5 (802.11ac), with two Ethernet ports per unit.
Joybuy
No image available
TP-Link Omada EAP653
A wired access point for adding Wi-Fi in another location. It needs an Ethernet connection, and the product description lists PoE support.
Wi-Fi 6, one Ethernet port and wall or ceiling mounting.
Joybuy
Frequently asked questions
Do I need to buy a new router if the connection drops during a presentation behind a wall?
Not straight away. First, test the connection where you’ll be presenting and see whether changing the position or settings of your existing Wi-Fi helps. Only then decide whether you need an extra Wi-Fi access point.
Can I connect mesh nodes to my existing router with a cable?
It depends on the system and its operating mode. TP-Link explains how to connect a satellite to the main router by cable when using Deco in access point mode. Check the manual for your exact system and the ports available.
Why doesn’t my presentation screen appear as a wireless display?
For the Windows projection method described by Microsoft, check whether the screen supports Miracast or needs a suitable adapter. A different Wi-Fi router won’t give a screen Miracast support.
Can I combine different powerline Deco models?
Not for every powerline backhaul setup. According to TP-Link, the Deco PX50 isn’t compatible with the PX10, P9 or P7 for this purpose. Check compatibility between the exact models before combining them.