Who is this guide for?

Presenter whose screen can't be found

If your devices can't find each other, first check that they support the same presentation method and can reach each other over the network. Google Help lists client isolation as a possible cause of Cast issues; Apple Support explains which devices can receive AirPlay.

Presenter in a room with a weak signal

You want to present somewhere the router's signal is weak. The Consumers' Association recommends placing a Wi-Fi extender where you want to improve the signal. If you're using a wireless repeater, make sure it still gets a signal from the router itself.

Household with connection problems in several rooms

If you need coverage in different parts of your home, you could compare running a cable to an access point with using several compatible Wi-Fi points. The Consumers' Association discusses extending Wi-Fi to multiple rooms; devolo explains that its repeater needs a LAN cable when used in access point mode.

What should you consider when choosing?

If your Wi-Fi coverage is good but your devices can't find each other, check the connection and presentation method first. Only then decide between extending your Wi-Fi wirelessly, using a wired access point or adding multiple Wi-Fi points.

Check your network and presentation method first

A good fit if: the screen and sending device can't find each other, even though the Wi-Fi signal seems usable.

Bear in mind: a repeater won't solve missing Cast or AirPlay support.

Wireless repeater

A good fit if: one room has poor coverage and there's a spot between the router and that room where the router's signal is still usable.

Bear in mind: the repeater still relies on Wi-Fi to connect to the router.

Wired access point

A good fit if: you can run an Ethernet cable to the place where you want to add Wi-Fi.

Bear in mind: you'll need a cable run, and your chosen device must support access point mode.

Multiple Wi-Fi points or mesh

A good fit if: several rooms or floors have poor coverage.

Bear in mind: check that the points work with your router. A mesh label doesn't guarantee that every router combination offers the same features.

What to consider What to check Who it's important for
Devices can find each other Do the sending device and screen support the same presentation method, and can they reach each other over the network? If my phone or computer can't find the screen, I want to know first whether the devices and their network connection are compatible. Around 33% of consumers are most concerned about device discovery.
Coverage in one room Is there a spot for the repeater where it can still get a usable signal from the router? If I mainly have a weak signal in one presentation room, I want to know whether a repeater can improve coverage there without losing its own connection to the router. Around 45% of consumers prioritise coverage in one location.
Several rooms Check the number of Wi-Fi points, how they connect to each other and whether they're compatible with your router. If I want to present in different places, I'll check whether one solution can reach the rooms I need and work with my router. Around 22% of consumers are most concerned about coverage in several locations.

Common buying mistakes

  • Confusing better coverage with support for a presentation method

    A repeater extends your coverage, but it won't add a missing Cast or AirPlay receiving function.

    Before you buy, check which presentation methods the sending device and screen support, and whether they can reach each other over the network.

  • Putting the repeater somewhere the router's signal barely reaches

    A wireless repeater needs to be able to connect to the router itself. A weak signal where you place it can limit how much it improves coverage.

    Check the signal at the spot you're considering, then test it in the room where you'll be presenting once it's installed.

    You may need to move the repeater or consider running a cable to an access point.

  • Assuming every mesh repeater works with your router

    Mesh features can depend on the combination of devices. TP-Link says the RE705X's OneMesh feature requires a compatible OneMesh router; devolo describes mesh compatibility with other devolo Wi-Fi products.

    Check the exact mesh feature and compatibility with your router before choosing a combination.

Brands to consider for this choice

TP-Link

TP-Link describes the RE705X as a Wi-Fi 6 repeater with a gigabit port and access point mode.

  • The access point mode described offers a wired alternative if you can connect a suitable Ethernet cable.
  • The OneMesh feature described requires a compatible OneMesh router. Check the hardware version too.

devolo

devolo describes the WiFi 6 Repeater 3000 as supporting wireless repeater and wired access point modes.

  • The manufacturer lists a gigabit LAN port and describes access point use with a LAN cable.
  • The mesh compatibility described is with other devolo Wi-Fi products. Check the specific model and combination.

NETGEAR

NETGEAR describes the EAX15 as a Wi-Fi 6 extender for extending an existing network, with a gigabit Ethernet port.

  • The manufacturer says it uses your existing Wi-Fi name.
  • The speeds quoted are manufacturer specifications. They don't tell you what speed you'll get where you present. Check the model and hardware version being offered.

Joybuy products

These product picks cover mesh for several locations, wireless Wi-Fi extension and access point or extender setups. When buying, also check that the version on offer carries the applicable CE marking.

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

A good fit for a home where you want to use Wi-Fi in several locations with mesh units that work together. The product description lists three units, dual-band Wi-Fi 5 (2,4 GHz/5 GHz) and two Ethernet ports per unit.

View at Joybuy
TP-Link Deco M4 (3-pack), dual-band Wi-Fi 5

TP-Link Deco M4 (3-pack), dual-band Wi-Fi 5

A good fit if you want to extend Wi-Fi to several locations using three Deco units that work together. The description lists dual-band Wi-Fi 5 (2,4 GHz/5 GHz) and two Ethernet ports per unit.

View at Joybuy
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

A good fit if you're looking for a three-unit mesh setup to get Wi-Fi in several locations. The product description lists dual-band Wi-Fi 6 (2,4 GHz/5 GHz) and three gigabit Ethernet ports per unit.

View at Joybuy
WiFi Repeater Pro, black

WiFi Repeater Pro, black

A good fit for extending Wi-Fi wirelessly to an area with a weak signal, provided the repeater can still connect to the router. The description lists 2,4 GHz, external aerials, a plug-in design and setup via the Mi app.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N access point and Wi-Fi extender

A good fit if you're looking for an access point or extender and can use a wired connection. The product title lists Wi-Fi N up to 300 Mbps, two aerials, WPS and Passive PoE; the description mentions 2,4 GHz and Ethernet.

View at Joybuy

Frequently asked questions

Will a Wi-Fi repeater fix the problem if your phone can't see the presentation screen?

Not necessarily. First check that both devices support the same presentation method and can reach each other over the network. Google Help lists client isolation as a possible cause of Cast issues; Apple Support recommends checking the network connection, among other steps, when troubleshooting AirPlay.

Where should you put a wireless repeater?

Put it somewhere it can still get a usable signal from the router and reach the room with the connection problem. Then test the connection where you'll actually be presenting.

When can you use an Ethernet port to set up an access point?

You can do this if you have an Ethernet cable running to a suitable location and your chosen device supports access point mode. devolo describes an access point mode with a LAN cable for the WiFi 6 Repeater 3000; TP-Link describes this mode for the RE705X.

What can you do if a repeater you bought online isn't suitable?

According to ACM ConsuWijzer, online consumer purchases generally come with a 14-day cooling-off period from delivery, although exceptions and conditions may apply. The seller is also responsible for the legal guarantee if the product doesn't meet what you could reasonably expect.

Can a Wi-Fi repeater be sold in the Netherlands without the correct CE marking?

The Dutch Authority for Digital Infrastructure says distributors may only sell equipment that meets the applicable requirements, including CE marking. Check the marking and product information for the specific version; the brand name alone doesn't confirm that every product on offer meets these requirements.