Who is this approach for?

Portfolio uploader with a slow workspace connection

You send large files from one room and want to find out whether the delay is caused by Wi-Fi or your internet connection. The Dutch Consumers’ Association recommends testing with a wired connection to assess your internet speed.

Resident with a weak connection beyond the hallway

You’re looking for a spot where a wireless repeater can still receive a good signal from the router. TP-Link and devolo point out that a repeater can’t pass on a weak signal and make it stronger.

Home worker who may be able to run a network cable

You may be able to run Ethernet to your workspace and want to know whether a wired access point or a repeater in access point mode would suit you. TP-Link describes access point mode as a wired connection to the router.

What should you consider when choosing?

Wireless repeater

Choose this option: if you can’t run a cable to your workspace and can find a spot with a usable signal from the router.

Bear in mind: the connection between the router and repeater is still crucial; placing it in an area with no usable signal won’t solve the problem.

Wired access point

Choose this option: if you can run Ethernet to a spot where you need Wi-Fi.

Bear in mind: you’ll need a suitable connection and a route for the cable; the connection to the router won’t be wireless.

Mesh with a compatible router

Choose this option: if you want to cover several areas or extend the mesh features of an existing compatible system.

Bear in mind: check compatibility between the exact models; the wireless connection between mesh points still depends on where you place them.

The Dutch Consumers’ Association recommends measuring upload speed using a wired connection at the router. TP-Link and devolo stress that a repeater must still receive a usable signal from the router.

What to consider What to look for when buying Who is this important for?
Upload speed at your workspace Compare a wired upload speed test at the router with one at your workspace. I want to send large portfolio files from my workspace and first find out whether my internet connection is the bottleneck; around 36% of consumers say reliable uploads are their top priority.
Signal at the repeater Test sockets along the route and check the connection at your workspace. If the signal drops out beyond the hallway, I want to find a spot where the repeater can still receive a good signal from the router; around 29% of consumers say coverage through the hallway is their top priority.
Wired connection Check whether you can run Ethernet to a suitable spot and whether the device has an Ethernet port and access point mode. I want to avoid a wireless link in between if I can run a cable; around 21% of consumers say a wired Wi-Fi access point is their top buying priority.
Mesh compatibility Make a note of your router model and check that the repeater supports the mesh feature you want. If I want to extend my existing Wi-Fi system, I want to know whether the devices support the features I need; around 14% of consumers say this compatibility is their top priority.

Common buying mistakes

  • Buying a repeater without measuring your internet connection first

    Better Wi-Fi coverage won’t fix a limitation with your internet connection. The Dutch Consumers’ Association recommends testing the speed using a wired connection at the router.

    First, measure the upload speed using a wired connection at the router, then compare it with the speed at your workspace.

  • Plugging the repeater in somewhere it can’t get a usable signal from the router

    A repeater can’t turn a weak signal it receives into a strong connection. TP-Link and devolo recommend taking signal strength at the installation spot into account.

    Test sockets before the point where the signal drops out. If the wireless connection between the devices remains weak, see whether running a cable and using access point mode is an option.

  • Assuming mesh compatibility from the product name alone

    The TP-Link RE605X’s OneMesh feature requires a compatible OneMesh router. FRITZ! describes automatic transfer of settings when used with a FRITZ!Box; don’t assume this applies to other routers without checking.

    Before buying, check the exact router and repeater models, as well as the mesh feature you want to use.

Brands to consider

TP-Link

According to TP-Link Netherlands, the RE605X is a Wi-Fi 6 repeater with a signal indicator, gigabit Ethernet port and access point mode.

  • The manufacturer says the signal indicator can help you choose where to place it.
  • This model needs a compatible OneMesh router to use OneMesh; the specifications don’t show upload speeds for your hallway layout.

FRITZ!

According to FRITZ!, the FRITZ!Repeater 1200 AX has a gigabit LAN connection and can be connected to the network via LAN.

  • FRITZ! describes automatic transfer of settings when the repeater is used with a FRITZ!Box.
  • Don’t assume this specific integration applies to routers from other brands without checking.

devolo

devolo describes the WiFi 6 Repeater 3000 as a device with gigabit LAN that can also be used as an access point.

  • The manufacturer lists both repeater and access point modes.
  • An advertised maximum Wi-Fi throughput isn’t a measured internet speed and won’t tell you how the device will perform in your hallway.

NETGEAR

NETGEAR describes the EAX15 as an extender for extending an existing network.

  • The manufacturer provides support information specific to the EAX15 model.
  • Check which connection and installation options are available for the exact version.

Joybuy product picks

These products offer different ways to bring Wi-Fi to your workspace: with a wireless repeater, a mesh system or an access point.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

With two units, this pack could suit a plan to extend Wi-Fi coverage using several mesh points; check that your chosen set-up will work with your existing network.

Joybuy
TP-Link Deco E4 3-pack

TP-Link Deco E4 3-pack

This mesh system could be a good fit if you want to use several points; check that it’s compatible with your router and the features you already use.

Wi-Fi 5 (802.11ac); dual-band 2.4 GHz and 5 GHz.

Joybuy
TP-Link Deco X50 3-pack

TP-Link Deco X50 3-pack

An option if you want to extend Wi-Fi coverage using several mesh points; check that this system is compatible with your existing network.

Wi-Fi 6 (802.11ax); dual-band 2.4 GHz and 5 GHz.

Joybuy
Wi-Fi Repeater Pro Black

Wifi Repeater Pro Black

A repeater for extending an existing wireless network. Choose a spot where it can still receive a usable signal from the router, then test the upload speed at your workspace.

Joybuy
TP-Link Omada EAP653 wireless access point

TP-Link Omada EAP653 Wireless Access Point

An access point to consider if you can run Ethernet to the spot where you need Wi-Fi.

The product name lists 2976 Mbit/s and Power over Ethernet (PoE); this isn’t a measured upload speed for your internet connection.

Joybuy

Frequently asked questions

How can you tell whether a Wi-Fi extender could help with your portfolio uploads?

First, compare the upload speed using a network cable at the router with the speed at your workspace. The Dutch Consumers’ Association recommends testing with a wired connection. If uploads are slow at the router too, investigate your internet connection rather than changing only your Wi-Fi set-up.

Where should you place a repeater in a narrow hallway?

Don’t place the repeater somewhere the router’s signal has already dropped out. Start between the router and your workspace and test the connection. If there are walls or other obstacles, a spot closer to the router may work better. The right position depends on your home.

When should you choose an access point instead of a wireless repeater?

An access point is an option if you can run Ethernet to the location where you need Wi-Fi. TP-Link describes access point mode as using a cable between the router and the device; check that this mode is available on the model you choose.

Will a mesh repeater work with any router?

Don’t assume it will: check that the specific mesh feature works with your router model. For example, TP-Link says OneMesh on the RE605X requires a compatible OneMesh router.

Does a Wi-Fi repeater sold in the Netherlands need a CE mark?

Radio equipment placed on the market in the European Union must meet the applicable European requirements. Following a conformity assessment, the manufacturer affixes the CE mark, according to the Dutch Authority for Digital Infrastructure. A CE mark isn’t an independent performance test of the device.