Who is this choice relevant to?

Portfolio creator working beyond the hallway

You upload work from a room where walls, distance or the hallway can weaken the Wi-Fi, and want to know whether you need an extra access point. The Consumers’ Association lists walls, ceilings and other obstacles as factors that can interfere with the signal.

Creator of large files

You want to find out before buying whether a slow portfolio upload is down to the Wi-Fi or the upload speed of your broadband package. The Consumers’ Association describes uploading as sending files over the internet.

User of a provider-supplied modem

You want to improve your Wi-Fi without replacing your existing provider-supplied device unnecessarily, and need to work out how to connect your own router or an extra access point to the network. ACM ConsuWijzer provides information about choosing your own router.

What should you look for when choosing?

Move your existing router

Choose this if: your wired upload speed is good and a more open, higher or more central position improves Wi-Fi at your workspace.

Consider: moving the router may require a longer cable; speak to your provider before moving its Wi-Fi modem.

One standalone router

Choose this if: one well-positioned access point provides enough coverage and you want to use your own router.

Consider: one transmitter won’t automatically solve weak Wi-Fi caused by distance or obstacles; also check your provider’s connection settings.

Multiple wirelessly connected access points

Choose this if: your workspace has poor coverage, you can’t run a network cable and you can place an extra access point somewhere with a good signal.

Consider: the connection between access points will still depend on Wi-Fi reception where the extra point is positioned.

Access point with Ethernet backhaul

Choose this if: you can run a network cable to the other side of the hallway and need Wi-Fi there.

Consider: you’ll need cabling and suitable ports; the access points don’t use Wi-Fi bandwidth to communicate with each other, as NETGEAR Support explains for the Nighthawk Mesh models mentioned.

What to consider What should you check? Who is this important to?
Coverage at your workspace Check the Wi-Fi at your workspace and see where an extra access point could go; find out whether you can run a cable between the access points. If the hallway or walls weaken the Wi-Fi, I want to know whether one access point will be enough or if I need another closer to my workspace. Around 36% of consumers prioritise coverage.
Upload speed Compare a measurement over Ethernet with one taken at your workspace, and check the upload speed included in your broadband package. When uploading large portfolio files, I want to know whether my internet connection is the bottleneck before choosing different Wi-Fi equipment. Around 29% of consumers prioritise upload speed.
Connecting to your existing network Check the connection mode, provider settings, available ports and how many access points are included in the box. If I want to keep using my provider-supplied device, I want to know how my own router or mesh system connects to it. Around 21% of consumers prioritise ease of connection.
Security and maintenance Find out how firmware updates work and whether you can enable automatic updates. If I manage my own router, I want to be able to check for updates and change the default login details. Around 14% of consumers prioritise secure management.

Common pitfalls

  • Confusing a high Wi-Fi speed with a fast upload

    Your Wi-Fi connection and the upload speed of your broadband package are two different things. A higher advertised Wi-Fi speed won’t change your package’s upload speed.

    First, measure your upload speed over Ethernet and compare it with a measurement at your workspace.

  • Putting a wireless access point where the signal is already weak

    An extra access point still needs a usable connection to the main one; walls and distance can interfere with that connection.

    Try different positions and consider Ethernet backhaul if you can run a cable.

  • Treating a repeater, mesh system and standalone router as the same thing

    A FRITZ!Repeater extends a network, while the TP-Link Archer AX55 is a standalone router. The number of units in a mesh pack also determines how you can plan your setup.

    First, decide what role the new device will have alongside your existing provider-supplied device, then check which connections you’ll need.

Relevant brands for this Wi-Fi setup

TP-Link

The Dutch product range includes both standalone routers and Deco mesh systems with multiple access points.

  • TP-Link Netherlands lists optional Ethernet backhaul and three gigabit ports per unit for the Deco X50.
  • The Deco X50 is a mesh option; the Archer AX55 is a standalone router. Advertised wireless speeds and coverage claims don’t prove what upload performance you’ll get beyond this hallway.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh range for anyone who wants to position access points in more than one place.

  • ASUS describes Ethernet backhaul as an option when Ethernet connections are available.
  • The stated 160 MHz bandwidth may be restricted in some regions. The manufacturer’s speed claims aren’t measurements taken in your home.

FRITZ!

The FRITZ!Repeater 2400 is designed to extend an existing FRITZ!Box setup, not to replace a modem.

  • FRITZ! says the model can connect to a FRITZ!Box via gigabit LAN and can also be used with other (modem) routers.
  • This model supports Wi-Fi 5; check which mesh features are available in the combination you’re using.

NETGEAR

The Nighthawk Mesh documentation is relevant if you’re considering a system with a wired connection between the router and satellites.

  • NETGEAR Support explains that, for the Nighthawk Mesh models mentioned, Ethernet backhaul doesn’t use Wi-Fi bandwidth between the router and satellite.
  • Connection options vary by model; this information doesn’t automatically apply to every NETGEAR router.

Joybuy products for extra Wi-Fi coverage

These products are designed to extend Wi-Fi coverage using multiple access points, including options with wired backhaul.

TP-Link Deco BE68 2-Pack

TP-Link Deco BE68 2-Pack

A mesh system with two access points for anyone who wants Wi-Fi in several places and can run a cable between the points.

The description lists tri-band Wi-Fi, optional wired backhaul and WAN/LAN ports of 10, 2.5 and 1 Gbps.

Joybuy
TP-Link Deco X50 (3-Pack), Dual-Band Wi-Fi 6

TP-Link Deco X50 (3-Pack), Dual-Band Wi-Fi 6

A set of three access points for anyone who wants Wi-Fi in several places.

The product information lists Wi-Fi 6 and optional Ethernet backhaul.

Joybuy
Huawei eKit OptiX FG736 BE3600 Dual-Band WiFi 7 Mesh Router

Huawei eKit OptiX FG736 BE3600 Dual-Band WiFi 7 Mesh Router

A mesh router for anyone who wants to extend Wi-Fi around the home with a system that lets multiple units work together.

The product name lists dual-band and WiFi 7; the product description mentions management through the HUAWEI SmartLife app.

Joybuy
Huawei eKit OptiX FG630 AX3000 Dual-Band WiFi 6 Mesh Router

Huawei eKit OptiX FG630 AX3000 Dual-Band WiFi 6 Mesh Router

A mesh router for anyone who wants to extend Wi-Fi across several rooms and manage the network through an app.

The product name lists AX3000, dual-band and WiFi 6; the product description mentions management through the Huawei AI Life app.

Joybuy
TP-Link Deco X50-PoE (2-Pack), Dual-Band Wi-Fi 6

TP-Link Deco X50-PoE (2-Pack), Dual-Band Wi-Fi 6

A mesh system with two access points for anyone who wants Wi-Fi in several places and can run a cable to one of the points.

The product information lists Wi-Fi 6, WPA3 and PoE; the description says that one cable can provide both power and data.

Joybuy

Frequently asked questions

Should you buy a new router if your portfolio uploads slowly?

Not before comparing your upload speed over Ethernet with the speed at your workspace. If your wired upload is slow too, first look at your internet connection and the upload speed of your broadband package; a higher advertised Wi-Fi speed won’t change your package speed.

Where should you put an extra access point near a narrow hallway?

For a wireless connection, the extra access point still needs a good connection to the main one, so test the reception before settling on a position. If you can run a network cable to the other side, a system with Ethernet backhaul can connect the access points by cable.

Can you use your own router in the Netherlands?

Yes, ACM ConsuWijzer confirms that you can choose your own router. Do check which settings are needed to connect the device to your provider’s network.

How can you keep your own router secure?

Check for firmware updates through the manufacturer’s app or website, enable automatic updates if available, and change the default login details. This general advice doesn’t tell you how long a specific model will receive updates.

Is a higher advertised Wi-Fi speed enough for large uploads?

No, an advertised Wi-Fi speed isn’t the same as the upload speed of your broadband package. The Consumers’ Association recommends taking upload speed into account when choosing; compare it with a measurement over Ethernet and one taken where you work.