A Wi-Fi extender is most useful when the wired upload speed at your router is good, but the Wi-Fi connection is poor where you send your photos. Compare the connections first, as the Dutch Consumers' Association advises. For one problem area within wireless range, choose a repeater; for a spot with a network cable, choose an access point; or consider multiple mesh nodes if you have problems in several rooms. None of these options will increase the upload speed of your internet connection.
Who is this choice relevant to?
Uploading from a room with weak Wi-Fi
You send photos from one spot where the Wi-Fi is noticeably weaker than it is by the router. A wireless repeater is only a possible solution if it can still get a usable connection to the router itself. The Dutch Consumers' Association highlights range and compatibility as factors to consider with Wi-Fi extenders.
A household uploading at the same time
Several people are sending files at once, and you want to know whether the bottleneck is the shared internet upload or the wireless connection. The Dutch Consumers' Association explains that upload speed matters when sending photos, and tests Wi-Fi extenders with multiple connected devices.
Uploading from a spot where you may be able to run a network cable
You may be able to run a cable to the spot where you upload, then provide Wi-Fi there without a wireless connection between the router and extender. If so, check that your chosen device has access point mode and the LAN connection you need; TP-Link and FRITZ! describe these options for specific models.
What should you look for when choosing?
| Factor to consider |
What should you look for when buying? |
Who is this more important to? |
| Coverage where you upload |
Compare the Wi-Fi by your router with the Wi-Fi where you upload. Place a repeater where it can still receive a usable signal from the router. |
If I send photos from one room, I want a usable connection there without having to keep moving; around 28% of consumers say coverage where they upload is their main concern. |
| Simultaneous Wi-Fi use |
Consider whether dual-band or tri-band is right for your setup and devices. Assess the connection while several people are using it, rather than relying only on the stated maximum Wi-Fi speed. |
When several people upload photos at the same time, I want to know whether the wireless connection can handle it; around 22% of consumers prioritise simultaneous use. |
| Wired connection |
Check whether you can run a network cable to the spot where you upload, and whether the model has access point mode and the LAN connection you need. |
If I can run a cable to the spot where I upload, I want to provide Wi-Fi there without a wireless connection to the router; around 17% of consumers prioritise this wired option. |
| Upload speed of your internet connection |
Measure the upload speed using a wired connection at the router, then compare it with the Wi-Fi connection where you upload. A stated Wi-Fi data rate does not guarantee a particular speed when uploading to an online album. |
Before I buy a device, I want to know whether the internet connection itself is the bottleneck; around 22% of consumers check their internet upload speed first. |
| Compatibility and management |
Check the exact router model, the mesh features you want and support for the specific device version. |
If I want to keep using my existing network, I want to know whether it will work with the features I need; around 11% of consumers prioritise compatibility and management. |
Pitfalls to avoid when buying
-
Mistaking a high AX or Mbps rating for upload speed
Your internet connection speed and your local Wi-Fi speed are two different things. A Wi-Fi specification does not tell you how quickly photos will be sent to an online album.
First, compare a wired measurement at the router with the connection where you upload, as the Dutch Consumers' Association advises.
-
Placing a wireless repeater where the router signal is already weak
The repeater needs to be able to connect to the router itself in order to extend the connection.
Use the signal indicator if available, and try a spot closer to the router. An access point connected by network cable could be an alternative if you can run a cable.
-
Assuming mesh works the same way with every router
The mesh features TP-Link describes for OneMesh and ASUS describes for AiMesh are tied to compatible routers. Standard repeater functionality does not automatically mean that all brands share the same mesh features.
Check your exact router model and the features you want before choosing a device.
You may need additional equipment for certain brand-specific mesh features.
-
Judging a product solely by its model name
The model name alone does not show whether the exact version meets the requirements for radio equipment sold in the Netherlands.
Check the CE marking and declaration of conformity for the exact version. Since 1 August 2025, applicable RED 3.3 cybersecurity requirements have also applied to internet-connected radio equipment; which requirements apply depends on the device's features.
Relevant brands to consider
TP-Link
The RE705X is a standalone dual-band Wi-Fi 6 extender for a local coverage problem. TP-Link also describes access point mode via gigabit Ethernet for this model.
- TP-Link lists OneMesh support when used with a compatible OneMesh router.
- The stated Wi-Fi link speeds are not independently measured photo upload speeds.
FRITZ!
The FRITZ!Repeater 1200 AX may suit a FRITZ!Box setup, or anyone looking for a repeater that FRITZ! says can also connect to other routers via Wi-Fi or LAN.
- FRITZ! lists a gigabit LAN connection and integration with its own mesh system.
- Using it with another router does not automatically give you access to the same FRITZ! mesh features.
ASUS
For the RP-AX58, ASUS describes repeater, access point and media bridge modes. AiMesh is relevant when used with a compatible ASUS router.
- ASUS specifies dual-band Wi-Fi 6 and one gigabit port.
- ASUS performance comparisons apply under the test and device conditions stated by the brand; they are not measurements of upload performance in a home.
devolo
The WiFi 6 Repeater 5400 is worth considering if you're looking for a standalone Wi-Fi point with a signal indicator.
- devolo describes WPS setup, a signal indicator and mesh functionality with other devolo Wi-Fi products.
- A stated maximum data rate does not guarantee internet speed for uploads; check the connections and features of the exact version.
Product options at Joybuy
This selection includes TP-Link Deco mesh systems with multiple Wi-Fi points and TP-Link Omada access points for a wired Wi-Fi setup. Before buying, check the applicable product documentation and requirements for use in the Netherlands for the exact version.
Image unavailable
TP-Link Deco BE68 2-Pack
A two-point mesh system for setups with coverage problems in several areas; the listed features are not measured upload performance.
The product description lists tri-band Wi-Fi 7, support for 200+ devices, and 10, 2.5 and 1 Gbps ports per point.
View at Joybuy
Image unavailable
TP-Link Deco X50 3-Pack Dual-Band Wi-Fi 6
A three-point mesh system for setups where you want Wi-Fi in several areas; the listed network features do not guarantee upload speeds.
The product description lists dual-band Wi-Fi 6, MU-MIMO, OFDMA and three gigabit Ethernet ports per point.
View at Joybuy
Image unavailable
TP-Link Omada EAP653
An access point for a wired setup; check that the cable and installation are suitable for the area where you want to provide Wi-Fi.
The product information lists dual-band Wi-Fi 6, a gigabit port, PoE and MU-MIMO. The stated maximum of 250 simultaneous users is not an independent performance measurement.
View at Joybuy
Image unavailable
TP-Link EAP725-Wall Wi-Fi 7 PoE
An access point for a wired Wi-Fi setup; bear in mind that you'll need a cable and will have to install it where you want to use it.
The product information lists dual-band Wi-Fi 7, PoE and up to 250 simultaneous users. The title lists 5012 Mbit/s; this is not a measured photo upload speed. The device has three Ethernet ports, including a 2.5 Gbps connection.
View at Joybuy
Image unavailable
TP-Link Deco XE75 Tri-band Wi-Fi 6E 3-Pack
A three-point mesh system for setups with coverage problems in several areas; check that your devices' Wi-Fi versions support the features you want to use.
The product information lists tri-band Wi-Fi 6E and three gigabit Ethernet ports per point. The listed features do not guarantee internet speed for photo uploads.
View at Joybuy
Frequently asked questions
Why doesn't a Wi-Fi extender always help with slow photo uploads?
Uploads use the upload speed of your internet connection. First, measure it using a computer connected to your home network with a network cable. If the upload is still slow, a Wi-Fi extender won't fix the problem on its own.
Where should you place a wireless repeater?
Place a wireless repeater where it can still connect to the router, not at the point where the signal has already dropped out. According to the TP-Link manual, the RE705X's signal light turns red when the signal it receives is weak.
What should you look for in a Wi-Fi extender sold in the Netherlands?
Check the CE marking and declaration of conformity for the exact version. According to the Dutch Authority for Digital Infrastructure, applicable RED 3.3 cybersecurity requirements for internet-connected radio equipment have been in force since 1 August 2025; which requirements apply depends on the device's features.
How can you check whether your Wi-Fi setup works for uploads?
Compare the upload speed over a wired connection at the router with the Wi-Fi connection where you send photos. Then check the connection while several people are using it at once, and see whether the manufacturer provides firmware for the exact model and hardware version.