Who is this advice for?

Uploading photos with weak Wi-Fi upstairs

You send photos from different floors and notice that the connection gets worse the further you are from the router. First, work out where you need extra coverage. The Consumentenbond recommends checking Wi-Fi in the places where you actually use it.

Uploading photos with a slow internet connection

Uploading takes a long time even when you’re close to the router. A wired test can help you work out whether the internet connection itself is causing the delay. The Consumentenbond distinguishes between upload speed from your internet connection and Wi-Fi.

Looking to add Wi-Fi points

You want to connect floors using existing network cables, or without running cables. Check which cables, connections and power supplies are available. FRITZ! and Ubiquiti explain the different requirements for wired extensions.

What should you look for when choosing Wi-Fi for photo uploads?

Reposition your existing router

Choose this if: your wired upload speed is adequate and the Wi-Fi problem is limited to a few areas. The Consumentenbond recommends placing the router somewhere more open and higher up.

Bear in mind: repositioning alone won’t always overcome ceilings or thick walls.

Wireless mesh points

Choose this if: Wi-Fi is weak on several floors and you can’t use Ethernet cables. Check the connection between points on each floor.

Bear in mind: positioning, building materials and the wireless connection between points all affect real-world coverage. A three-pack isn’t automatically necessary or sufficient.

Wired mesh points or access points

Choose this if: you have usable Ethernet connections running to the different floors. A FRITZ!Repeater 3000 AX can work as an additional access point over LAN.

Bear in mind: the cables and any power supply need to suit your set-up. Integrating it into a FRITZ! mesh over LAN requires a FRITZ!Box running FRITZ!OS 7 or later.

Check your internet connection

Choose this if: your wired upload speed is also disappointing compared with the speed of your internet package. Discuss the test results with your provider.

Bear in mind: a different Wi-Fi system won’t increase the upload speed of your internet connection.

Point to consider What to look for when buying Who is this important for?
Coverage on each floor Test Wi-Fi and upload speed where you send photos. Then decide whether you need to reposition the router or add extra points. If I upload from different floors, I want adequate coverage in those places; around 36% of consumers in this situation would make coverage their top priority.
Upload speed from your internet connection First, test using a wired connection and compare the result with Wi-Fi. A Wi-Fi specification doesn’t tell you the upload speed of your internet connection. If photos take a long time to send even when I’m close to the router, I want to know whether my provider’s upload speed is the limiting factor; around 29% of consumers in this situation would prioritise their connection’s upload speed.
Connection between points Check whether you can use Ethernet to a floor, or whether the points need to connect wirelessly. If you’re using access points, also check what power supply they need. If I want to connect different floors, I want to know whether the cables and equipment will work in my home; around 21% of consumers in this situation would make installation and the connection between points their top priority.
Kit size and usage Choose the number of points based on tests around your home. Also check which Wi-Fi generation your devices support and bear in mind that extra equipment may be left on all the time. If the places where I upload already have adequate coverage, I don’t want to choose more points or features than I need; around 14% of consumers in this situation would make purchase and usage their top priority.

Common purchasing mistakes

  • Confusing high Wi-Fi speeds with a fast upload speed from your provider

    Your internet connection’s upload speed and your Wi-Fi connection are two different potential bottlenecks. A new Wi-Fi system won’t fix a slow upload speed from your provider.

    First, test with a computer connected using an Ethernet cable, then test over Wi-Fi on the floors where you send photos. If the wired result is disappointing, discuss it with your provider.

  • Assuming the stated coverage guarantees a signal across three floors

    Ceilings, walls, positioning and the connection between mesh points all affect coverage in your home. A stated coverage area alone can’t predict upload performance in the places where you use your devices.

    Check Wi-Fi and upload speed where you want to send your album, then decide where to place the points and how many you need.

    Depending on the set-up you choose, you may need extra cabling or another point.

  • Treating a wired access point like a fully wireless router

    An access point such as the UniFi U6+ needs a network connection and a power supply. A FRITZ!Repeater operating as a LAN bridge also needs a cable connection.

    Before choosing, check the cable route, the role of your existing router and the power supply required for the access point.

Brands to consider

TP-Link

Deco mesh kits are worth considering if you want to set up several points. Check the exact model and kit size.

  • TP-Link says the Deco XE75 is a tri-band Wi-Fi 6E system, available in one-, two- and three-packs.
  • The stated coverage and combined radio speed don’t guarantee a particular upload performance in a three-storey home.

ASUS

ZenWiFi BD4 is a dual-band mesh option with router and access point modes. It’s suited to anyone who wants to keep or change the role of their existing provider-supplied device.

  • According to ASUS, each BD4 unit has two auto-detecting 2.5Gbit/s ports and is available in one-, two- and three-packs.
  • According to the specifications, the BD4 has no 6GHz radio. A Wi-Fi 7 label alone doesn’t predict how well the connection will perform between floors.

FRITZ!

The FRITZ!Repeater 3000 AX is designed to extend an existing router and can be used as an access point over LAN.

  • FRITZ! lists two gigabit LAN ports.
  • To integrate it into the FRITZ! mesh set-up described here over LAN, you need a FRITZ!Box running FRITZ!OS 7 or later. A standalone repeater isn’t a complete multi-point kit.

Ubiquiti

The UniFi U6+ is a wired access point for a set-up with Ethernet running to the floor.

  • Ubiquiti specifies one gigabit Ethernet port and PoE power, with a supported voltage range of 44–57 V DC.
  • This isn’t a standalone replacement for a complete router-and-mesh kit. Check that the power supply and network management suit your set-up.

Joybuy products for Wi-Fi across multiple floors

These products are multi-point mesh kits for Wi-Fi across different floors. First, check where the connection is weak. Before buying, check the CE marking and applicable RED 3.3 requirements for the exact version; the listed product information doesn’t confirm that these checks have been carried out for every version.

TP-Link Deco BE68 (2-pack)

TP-Link Deco BE68 (2-pack)

A two-point mesh kit for anyone looking to extend Wi-Fi across more than one floor. Check where the points can connect to each other.

View at Joybuy
ASUS ZenWiFi BT8 (2-pack)

ASUS ZenWiFi BT8 (2-pack)

A two-point mesh kit for anyone looking to extend Wi-Fi across several floors. Check the connection in the places where you upload.

View at Joybuy
TP-Link Deco X50 (3-pack)

TP-Link Deco X50 (3-pack)

A three-point mesh kit for anyone looking to set up Wi-Fi across several floors. Use test results to decide whether three points are right for your home.

View at Joybuy
ASUS ZenWiFi BT10 (2-pack)

ASUS ZenWiFi BT10 (2-pack)

A two-point mesh kit for anyone looking to extend Wi-Fi across different floors. First, check where you need extra coverage.

View at Joybuy
TP-Link Deco XE75 Pro (3-pack)

TP-Link Deco XE75 Pro (3-pack)

A three-point mesh kit for Wi-Fi across several floors. Position the points according to the connection you measure around your home.

View at Joybuy

Frequently asked questions

How can I tell whether my router or internet package is slowing down my uploads?

First, test using an Ethernet cable, then test over Wi-Fi where you upload. If Wi-Fi is the main problem, look at coverage and positioning. If the wired test is also disappointing compared with your internet package, discuss it with your provider. The Consumentenbond recommends a wired test to assess your internet connection.

Do I need exactly one mesh point on every floor?

No. Decide how many points you need based on tests in the places where you use Wi-Fi. Building materials and obstacles affect real-world coverage, and a stated coverage area doesn’t guarantee that a kit will perform the same way in your home.

Can I use my own router instead of the one supplied by my provider?

According to ACM ConsuWijzer, you’re free to choose your router in the Netherlands. Before replacing your provider’s device directly, check that your device meets the connection settings and security requirements. Adding an access point behind your existing device is different from replacing the modem.

Do I need a permit or registration to use Wi-Fi at home in the Netherlands?

The Rijksinspectie Digitale Infrastructuur describes Wi-Fi as licence-exempt, with no notification or registration requirement, provided you follow the allocated frequencies and terms of use.

What should I consider when maintaining and using extra Wi-Fi points?

Keep your router and Wi-Fi points up to date, and check the power consumption when using several points. A wired access point also needs a PoE power supply that suits your set-up. ACM ConsuWijzer highlights the importance of updates for network security.