First measure your upload speed using a wired connection, then near the router and at the end of the hallway: a different router won’t fix a limitation with your internet connection. If the hallway is the only problem, try moving the router first. If you have a cable available, choose a wired access point or mesh point; if not, place a wireless mesh point somewhere it can still get a usable connection to the router. The Consumentenbond recommends testing your internet connection using a cable. As Tweakers explains, the link between wireless mesh points can affect speed and response times.
Who is this guide for?
Uploading without a network cable
You upload photos at the end of a long hallway and can’t run a cable there. The position of a wireless intermediate point and its connection back to the router are important considerations. The Consumentenbond offers advice on where to place Wi-Fi extenders.
Uploading with the option of a cable
You can run a network cable to the room at the far end, or already have one there. You’re looking for a Wi-Fi point with a wired backhaul; TP-Link explains Ethernet backhaul for Deco systems.
Looking for the cause of slow uploads
You’re not yet sure whether Wi-Fi or your internet connection is slowing down photo uploads. The Consumentenbond recommends connecting a computer to your home network with a network cable when running a speed test.
What should you look for when choosing?
Move your existing router
Suitable when: your wired upload speed is good, but Wi-Fi becomes weak at the end of the hallway. The Rijksinspectie Digitale Infrastructuur lists moving the router as one possible way to improve Wi-Fi.
Consider: you may need a longer cable to move the router, and relocating it won’t fix a limitation with your internet connection.
Wired access point or mesh point
Suitable when: you can run a network cable to the hallway or the room at the far end. An Ethernet connection can provide a wired backhaul between mesh points.
Consider: running a cable takes work. Also check that the system works with your existing router and supports the access point mode you need.
Wireless mesh system
Suitable when: running cables isn’t practical, but there is a spot in between where an extra point can still connect to the router.
Consider: some systems share wireless capacity between mesh points and devices. Obstacles and extra wireless hops can affect the connection, according to Tweakers.
An extra point from your internet provider
Suitable when: you already use equipment from your provider and want to extend that setup.
Consider: check the terms for buying or hiring the equipment, and make sure the point works with your provider. KPN says a hired SuperWifi point only works on the KPN network.
The Consumentenbond recommends a wired speed test to assess your internet connection. Compare the result with tests near the router and at the end of the hallway. Then test a new access point or mesh point where you upload your photo album.
| What to consider |
What should you check? |
Who is this important for? |
| Coverage without a cable |
Try an intermediate position where the point still has a usable connection to the router, then test your upload speed at the end of the hallway. |
If I can’t run a cable, I want to know whether an intermediate point will reach the far end. Around 40% of consumers prioritise coverage without installing new cabling. |
| Wired backhaul |
Check whether you can run a cable, whether the points support Ethernet and whether the access point mode you need is available. |
If I can run a cable, I want a Wi-Fi point with a wired connection back to the network. Around 30% of consumers prioritise a stable wired connection. |
| Cause of the slow upload |
Compare your upload speed using a wired connection, near the router and where you upload, under similar conditions. |
If I don’t yet know the cause, I want to find out whether Wi-Fi or my internet connection is limiting the upload. Around 20% of consumers prioritise finding the cause. |
| Management and ongoing terms |
Check the firmware and security settings, as well as the terms for hiring equipment or paying for extra features. |
If management and ongoing terms matter most to me, I want to know what’s involved in using the system I choose. Around 10% of consumers prioritise these considerations. |
Common pitfalls
-
Buying a faster router without measuring your upload speed
A Wi-Fi solution won’t fix a limitation with your internet connection.
First compare a wired speed test with tests near the router and at the end of the hallway, as the Consumentenbond recommends.
-
Putting a wireless mesh point right at the end of the hallway
In the spot with the weakest signal, the point itself may not be able to maintain a usable connection to the network. Extra wireless hops can also use up capacity.
Try an intermediate position, then test the upload at the far end.
-
Comparing only the advertised Wi-Fi speed
A radio specification won’t tell you exactly how your upload will perform through walls and across multiple points.
Also compare the backhaul, placement options and ports on the exact model you’re considering.
-
Assuming a provider’s point or an app feature will work everywhere
A provider’s point may be tied to that provider’s network. Some mesh app features are only available with certain settings.
Check the provider and feature terms before buying, especially if you might switch providers later.
Hiring equipment and paid app features can involve ongoing costs; check the terms of the service you choose.
Relevant brands
TP-Link
The Deco range includes Wi-Fi 6 mesh kits. The Deco X50 is worth considering if you want to extend Wi-Fi to several points along a hallway.
- Tweakers described the Deco X50 as easy to set up.
- Tweakers found that wireless points placed further away could have limitations in speed and response times. TP-Link describes Ethernet backhaul and access point mode; check the model and available features.
ASUS
The ZenWiFi XD5 is a Wi-Fi 6 mesh kit for anyone considering multiple points and, potentially, Ethernet backhaul.
- ASUS says the XD5 can use Ethernet backhaul when cabling is available.
- That specification alone doesn’t tell you what upload speed you’ll get at the end of your hallway; Tweakers included the XD5 in its comparison.
FRITZ!
The FRITZ!Repeater 1200 AX is a potential way to extend your network if you already use a FRITZ!Box.
- FRITZ! says the repeater can connect over Wi-Fi or via its gigabit LAN port, and can also be used with other routers.
- Check which mesh and setup features are available with your router.
Netgear
Tweakers included the Orbi RBK762 in a comparison of mesh kits with multiple radio bands.
- The comparison discusses a different radio configuration from that used in dual-band kits.
- The results of that comparison don’t necessarily apply to a long hallway or to other Orbi models.
KPN
SuperWifi is an option from your provider if you already have KPN internet and compatible equipment.
- KPN recommends placing a wireless point between the modem and the area with the Wi-Fi problem.
- KPN says a hired SuperWifi point won’t work on another provider’s network; check the terms before hiring one.
Joybuy products for extending Wi-Fi
These are Deco mesh kits with multiple Wi-Fi points for extending coverage around your home. Before buying, check that the version on offer carries the required CE marking.
No image available
TP-Link Deco X50 (3-pack)
A three-unit mesh kit may be useful if you want to extend Wi-Fi to several areas; test the connection where you plan to upload.
Dual-band Wi-Fi 6; gigabit Ethernet ports on each unit; Ethernet backhaul option.
View at Joybuy
No image available
TP-Link Deco X50-PoE (2-pack)
This mesh kit is worth considering if you want multiple Wi-Fi points and are thinking about a wired setup; check the connection and where you plan to place it.
Dual-band Wi-Fi 6; PoE; two Ethernet ports on each unit.
View at Joybuy
No image available
TP-Link Deco XE75 Pro (3-pack)
A three-unit kit is one option for extending Wi-Fi to several areas; your actual upload speed also depends on the placement and connection between the points.
Tri-band Wi-Fi 6E; Ethernet ports on each unit.
View at Joybuy
No image available
TP-Link Deco XE75 (3 units)
This three-unit kit may suit a home where you need Wi-Fi in several areas; test the connection where you upload.
Tri-band Wi-Fi 6E; three gigabit Ethernet ports on each unit.
View at Joybuy
No image available
No image available
TP-Link Deco X50-PoE (3-pack)
This three-unit mesh kit is worth considering if you want multiple Wi-Fi points and are looking at wired placement with PoE.
Dual-band Wi-Fi 6; PoE; two Ethernet ports on each unit.
View at Joybuy
Frequently asked questions
Where should you place a wireless point in a long hallway?
Start somewhere in between where the point can still get a usable connection to the router. Then check whether your upload speed improves at the far end.
How can you check whether Wi-Fi is slowing down your photo upload?
Compare your upload speed using a wired connection, near the router and at the end of the hallway. The Consumentenbond recommends running a speed test with your computer connected to your home network using a network cable. Compare the results under similar conditions.
When is access point mode useful?
Access point mode may suit you if you want to keep your existing router and connect a mesh kit through your current network. TP-Link says some features aren’t available in this mode; check which features are supported by the version you choose.
Do you need a licence for home Wi-Fi in the Netherlands?
According to the Rijksinspectie Digitale Infrastructuur, Wi-Fi doesn’t require a licence if you use the designated frequencies and follow the conditions of use. Radio equipment sold in the Netherlands must meet the applicable requirements and carry the CE marking; check the version on offer.
Should you get a faster internet plan to upload photos?
Not before you’ve tested your connection using a cable and compared the result with the speed of your internet plan. If Wi-Fi is slow mainly at the end of the hallway, first look at moving the router or adding an access point.