Photo uploader with a slow connection
You want to find out whether your internet connection or Wi-Fi is slowing down uploads before you buy any equipment. The Consumentenbond recommends testing your internet connection using a wired connection.
Start by testing upload speed over a wired connection, then compare it with Wi-Fi in the room behind the kitchen. The Consumentenbond recommends using a network cable for a speed test. If Wi-Fi is particularly weak in that spot, try moving your router. Only consider an extra Wi-Fi point if coverage remains poor. A Wi-Fi router cannot increase the limited upload speed of your internet connection.
You want to find out whether your internet connection or Wi-Fi is slowing down uploads before you buy any equipment. The Consumentenbond recommends testing your internet connection using a wired connection.
You get a weak signal mainly in the room on the other side of the kitchen, and want to know whether moving your router will be enough or whether you need multiple Wi-Fi points. The Consumentenbond recommends placing a range extender where you want to improve the signal.
You can run a network cable between the rooms and want to avoid relying on a weak wireless connection between Wi-Fi points. TP-Link and ASUS describe Ethernet backhaul as an option when the equipment and connections support it.
First, check whether the slowdown is caused by your internet connection or by Wi-Fi where you upload. Then you can decide whether moving your router, adding a Wi-Fi point or using a wired connection is right for your home.
Suitable if: your wired upload speed is good and moving the router gives you a strong enough Wi-Fi signal in the room where you upload.
Trade-off: you won't need to buy a new router, but moving it may require a longer cable or a conversation with your provider.
Suitable if: you have a suitable central connection point and tests show that one access point provides enough coverage.
Trade-off: the kitchen and other obstacles may still weaken the signal to the other room.
Suitable if: Wi-Fi remains weak in the room where you upload and there’s a spot where the extra point can still get a good connection.
Trade-off: you’ll need an extra device and power socket. Obstacles can also weaken the connection between the points.
Suitable if: you can run a network cable to or beyond the kitchen and the wireless connection between rooms is the main problem.
Trade-off: you’ll need a cable route and compatible connections. Your internet connection will still determine upload speeds to the internet.
| Concern | What to look for when buying | Who is this important to? |
|---|---|---|
| Cause of slow uploads | Compare upload speeds over a network cable with Wi-Fi where you upload. | I want to know whether my internet connection or Wi-Fi is slowing down uploads before I buy anything; around 29% of consumers prioritise finding out what’s causing the problem. |
| Wi-Fi behind the kitchen | Check the signal in the room where you upload and see whether moving the router helps. | I upload from the room behind the kitchen and want usable Wi-Fi there; around 29% of consumers say coverage in that spot is their main concern. |
| Connection between Wi-Fi points | Check whether the exact model supports Ethernet backhaul and whether you can run a cable. | If I can run a cable, I don’t want the connection between points to depend on a weak wireless signal; around 24% of consumers prioritise a wired connection between points. |
| Cost and setup | Check what your existing equipment can do and how many extra points and power sockets you’ll need. | I want to solve the upload problem without buying or managing more equipment than necessary; around 18% of consumers prioritise keeping purchases and installation to a minimum. |
Wi-Fi speed and the speed of your internet connection are two different potential bottlenecks. A quoted Wi-Fi speed doesn’t tell you how quickly your photos will upload to the internet.
First, compare an upload speed test over a wired connection with one over Wi-Fi where you upload.
An extra point needs a usable connection to the network itself. If there’s barely any reception, the wireless connection between the points may remain weak.
Check the connection where you plan to put it. If the signal isn’t strong enough, see whether you can run a cable.
A repeater extends an existing network, but it doesn’t automatically replace the modem connected to your provider.
Check what equipment you already have and whether you need an extender, a router or a compatible modem.
The range includes standalone routers, such as the Archer AX55, and Deco mesh systems, including the Deco X50. These are worth considering when comparing a single access point with a multi-point setup.
The ZenWiFi XD5 is a Wi-Fi 6 mesh range for anyone considering multiple points and, potentially, a wired connection between them.
The FRITZ!Repeater 1200 AX is an option for extending an existing router’s coverage, particularly if you have a FRITZ! home network.
The Orbi RBK352 is a Wi-Fi 6 mesh kit for anyone considering a setup with two separate points.
This selection includes standalone routers and mesh products for Wi-Fi in the room behind the kitchen. Compare your chosen setup with your test results, and check whether you can run a cable between points if the wireless connection is limited.
Image unavailable
For anyone considering a two-point mesh setup with the option of running a cable between the points.
Image unavailable
For situations where one centrally positioned router seems sufficient.
Single-band 2.4 GHz; Fast Ethernet.
Image unavailable
For anyone who wants to see whether a single router in a suitable spot will be enough.
Image unavailable
For anyone considering a mesh setup with a wired connection between points.
Dual-band Wi-Fi 7 (802.11be), with 2.4 GHz and 5 GHz bands.
Image unavailable
For anyone who wants to start with a centrally positioned router and may add compatible AiMesh routers later.
Dual-band 2.4 GHz and 5 GHz; Gigabit Ethernet.
First, test upload speed on a computer using a network cable, then test it over Wi-Fi where you upload. If the wired connection is also slow compared with the speed promised by your provider, contact them. A different Wi-Fi router won’t fix a limitation with your internet connection.
Don’t put the point only where reception is worst: it still needs a usable connection to the network itself. If you have a suitable cable route, you can wire the points together with a system that supports Ethernet backhaul. Follow the connection instructions for the mode you’ve chosen.
Yes. According to ACM ConsuWijzer, you’re free to choose your router. If you use your own modem connected directly to your provider’s network, it must also meet technical and safety requirements. Contact your provider for the correct connection settings if needed.
The Dutch Inspectorate for Digital Infrastructure states that the CE marking must be visible on the radio equipment and that the declaration of conformity must be supplied with it. Check this for the exact model you’re considering.
According to the Dutch Inspectorate for Digital Infrastructure, home Wi-Fi is licence-free when you use the frequencies designated for it and comply with the conditions of use.