Start by checking the existing connection where you’ll be taking the workshop. A new router won’t fix a problem with your internet connection, and moving your router or using a wired connection may be enough. Choose a standalone router if one central Wi-Fi point reaches that spot. Consider mesh if several rooms have poor coverage, but bear in mind that placement matters and multiple wireless hops can add latency. Check compatibility with your devices and your provider’s equipment too: the Consumentenbond recommends assessing your home Wi-Fi, while Tweakers found that response times increased across multiple wireless hops when testing the three-unit Deco X50 set.
Who is this guide for?
Workshop participant with an unreliable connection
You want to use video, voice and screen sharing in one fixed location, and first find out whether Wi-Fi or your internet connection is the limiting factor. VodafoneZiggo and the Consumentenbond outline things to consider for video calls and Wi-Fi reception.
Participant in an area with weak Wi-Fi
You take the workshop a distance from your router and want to know whether you need to move it, use a cable or add Wi-Fi points. The Consumentenbond discusses Wi-Fi reception, while TP-Link describes mesh as a system with multiple points.
Household with older and newer Wi-Fi devices
You want to keep laptops, phones and other devices connected without assuming that every device supports the benefits of Wi-Fi 6. The Consumentenbond and manufacturers explain how this depends on the devices you use.
What should you look for when choosing?
Improve your existing set-up
When: If the problem mainly affects one workshop location, test the connection there first and try moving your router.
Trade-off: A cable limits your freedom to move around, and won’t help if the internet connection itself is the problem.
Standalone dual-band Wi-Fi 6 router
When: If one central Wi-Fi point reaches your workshop location and you also want to keep older Wi-Fi devices connected.
Trade-off: Older devices won’t benefit from Wi-Fi 6 improvements, and one router won’t necessarily fix weak coverage behind walls or on other floors.
Mesh with multiple Wi-Fi points
When: If one point doesn’t provide enough coverage at your workshop location or in other rooms you use.
Trade-off: You’ll need to position the extra points carefully. With the three-unit Deco X50 set tested by Tweakers, response times increased across multiple wireless hops.
The Consumentenbond recommends assessing Wi-Fi reception at home, while VodafoneZiggo describes connection problems during video calls. So, look beyond the router and consider your internet connection, workshop location and the devices that are online at the same time.
| Concern |
What to look for when buying |
Who is this important for? |
| Stable connection at your workshop location |
Test the connection there and check whether Wi-Fi or your internet connection is the limiting factor; see whether a cable is an option. |
If video, sound or screen sharing keeps cutting out at my usual workshop location, I want to know why. Around 32% of consumers put stability during the workshop first. |
| Coverage between rooms or floors |
Work out where the signal is weak, where extra points could go and whether a wired connection between them is possible. |
If I work in a room with poor router coverage, I want to know whether I need to move the router, use cables or add Wi-Fi points. Around 25% of consumers prioritise coverage at their workshop location. |
| Several devices online at once |
Check which Wi-Fi standards your devices support and whether any can be connected by cable. |
If my laptop, phone and other devices are online at the same time, I want to know which standards they support. Around 25% of consumers consider simultaneous use their main priority. |
| Connection and management |
Check whether the new equipment works as a router or an access point. Also check your provider’s settings and whether security updates are available. |
I want the new equipment to work with my existing modem and devices, and to be able to keep managing my network. Around 18% of consumers prioritise connection and management. |
Common pitfalls
-
Assuming a high Mbps figure means a great workshop experience
The advertised Wi-Fi speed alone won’t tell you whether the connection is stable where you’ll be taking the workshop. Your internet connection, router placement and the capabilities of the devices you use all play a part too.
Test the connection where you’ll be taking part before replacing any equipment.
-
Assuming extra wireless mesh points will always reduce latency
With the three-unit Deco X50 set tested by Tweakers, response times increased when the connection went through multiple wireless hops. The same result won’t necessarily apply to other mesh sets.
Plan where to place the points and see whether you can connect them by cable.
-
Buying a standalone router to replace any provider modem
A Wi-Fi router won’t automatically replace a modem that needs to connect directly to your internet service. You may need to configure your provider’s settings to get the right set-up.
Before buying, work out whether you need a router connected to your existing modem, an access point or a compatible replacement modem.
Brands to compare
TP-Link
Offers both standalone routers, such as the Archer AX55, and mesh options, such as the Deco X50.
- TP-Link lists OFDMA and gigabit ports for the Archer AX55, and optional Ethernet backhaul for the Deco X50.
- In its test of the three-unit Deco X50 set, Tweakers found weaker performance for clients connected to more distant wireless points. This doesn’t necessarily say anything about other TP-Link models.
ASUS
The RT-AX53U is a standalone dual-band Wi-Fi 6 router with access point mode and support for older Wi-Fi standards.
- ASUS lists three gigabit LAN ports and an access point mode for this model.
- The stated radio speeds are specifications, not a measurement of the connection during your workshop. Check the exact version too.
FRITZ!
A mesh set is worth comparing if coverage in multiple locations is your main concern.
- In a Dutch comparison from 2024, Tweakers included a set with two access points and three radio bands.
- The test applies to the set-up tested, so check which components are included in the set on offer.
Netgear
The Orbi RBK762 is a mesh option to compare if you’re considering multiple Wi-Fi points.
- In a Dutch comparison from 2024, Tweakers described the Orbi RBK762 set it tested as a system with three radio bands.
- The findings relate to the configuration tested, so check whether the set on offer contains the same components.
Joybuy product picks
This selection includes mesh options for coverage in multiple locations and a standalone router for a central Wi-Fi point. The Dutch Authority for Digital Infrastructure states that radio equipment placed on the EU market must meet European requirements. Check the CE marking on the version on offer.
No image available
TP-Link Deco BE68 2-pack
A mesh set with two units for anyone who needs Wi-Fi in several areas of their home.
Product details list tri-band Wi-Fi 7, Multi-Link Operation and wired ports on each unit.
View at Joybuy
No image available
TP-Link Deco PX10 dual-band Wi-Fi 6
A mesh option for a workshop location that’s hard to reach with a single Wi-Fi point.
Product details list dual-band Wi-Fi 6, gigabit Ethernet ports and Powerline networking via your home’s electrical wiring.
View at Joybuy
No image available
ASUS RT-AX52 AX1800 dual-band router
A standalone router for a central Wi-Fi point that reaches your workshop location.
Product details list Wi-Fi 6, OFDMA, MU-MIMO and three gigabit Ethernet ports.
View at Joybuy
No image available
TP-Link Deco X50 3-pack dual-band Wi-Fi 6
A mesh set with three units for anyone who needs coverage in several areas.
Product details list Wi-Fi 6, two Wi-Fi bands, OFDMA, MU-MIMO and three gigabit ports per unit.
View at Joybuy
No image available
TP-Link Deco XE75 tri-band Wi-Fi 6E
A mesh option with three units for situations where you need Wi-Fi in several areas of your home.
Product details list tri-band Wi-Fi 6E with support for older Wi-Fi standards.
View at Joybuy
Frequently asked questions
Do I automatically need a Wi-Fi 7 router for an online workshop?
No, not necessarily. The Consumentenbond says Wi-Fi 6 is still a suitable choice for most people; older devices won’t benefit from Wi-Fi 6 improvements. Also consider coverage and the connection where you’ll be taking the workshop.
Can I connect a mesh set to my existing provider router?
Yes, if the mesh set has a suitable access point mode. TP-Link describes a mode for Deco in which the existing main router continues to assign IP addresses; some Deco features aren’t available in this mode. Check the instructions for the specific set.
Am I required to use my internet provider’s router in the Netherlands?
No. ACM ConsuWijzer confirms that you can choose your own router in the Netherlands. A modem you supply yourself must meet additional technical and safety requirements. If necessary, ask your provider for the settings and check whether you need a router or a modem.
How can I keep my own router’s software up to date securely?
Check regularly whether the manufacturer has released security updates and install them according to the instructions. VeiligInternetten offers practical information on updating routers.
What should I look for in a router sold in the Netherlands?
The Dutch Authority for Digital Infrastructure states that radio equipment placed on the EU market must meet the applicable European product requirements and carry a CE marking. Check the CE marking on the version on offer, not on a different model.