Who is this for?

Student on a floor with weak Wi-Fi

You want your video and audio to stay connected in the room where you usually study. The Consumers’ Association recommends placing Wi-Fi points where you want to boost the signal, so first check the connection in that room.

Household with weak Wi-Fi on several floors

You want coverage in more than one area and are weighing up running cables to Wi-Fi points against carefully positioned wireless mesh points. TP-Link and ASUS describe Ethernet backhaul as an option when suitable cabling is available.

User of an existing broadband provider router

You want to keep your current connection and extend your Wi-Fi where needed. ACM ConsuWijzer recommends checking with your provider about the settings you’ll need when replacing a modem.

What should you consider when choosing?

First, check the connection where you study. Then decide whether your current router is up to the job, whether you can run a cable to that floor or whether you need extra wireless points.

What to consider What to look for Who is this important for?
Coverage where you study Check the connection in the room where you study and work out which floor needs extra coverage. A stated coverage area is no guarantee it will work in your home. If I study on a floor where the Wi-Fi drops out, I want to know whether that particular room will get coverage. Around 36% of consumers prioritise coverage where they study.
Connection stability during lessons With Ethernet backhaul, the connection between Wi-Fi points runs over a cable. Without a cable, placement and the connection between the points are important. TP-Link and ASUS describe wired backhaul for suitable setups. If I don’t want to keep reconnecting during a live lesson, I’ll focus on the connection between the points. Around 29% of consumers prioritise a stable connection during lessons.
Compatibility with your existing setup Decide whether you want to extend your Wi-Fi or replace your modem. If you’re replacing your modem, ask your provider which settings and connection type you’ll need. If I want to keep using my provider’s router, I want to know whether the extra device will connect to it. Around 21% of consumers prioritise a compatible connection.
Use and maintenance Compare how many points you need and check whether firmware updates are available. The Safe Internetting website recommends enabling automatic updates where possible. If I don’t want to leave unnecessary equipment switched on, I’ll weigh up the number of points I need against the maintenance involved. Around 14% of consumers prioritise running costs and secure maintenance.

Common mistakes

  • Buying a more powerful standalone router as the only solution for a room several floors away

    The distance and construction of your home will still affect the connection between the router and the room where you study. Simply changing routers won’t necessarily solve the problem.

    First, check the connection where you study and see whether moving or adjusting your router helps. Then compare a wired Wi-Fi point with mesh.

    You may still need an extra Wi-Fi point or a cable.

  • Assuming a stated mesh coverage area guarantees coverage in your loft room

    A manufacturer’s coverage claim isn’t a measurement of your home; floors and the connection between points can affect the result.

    Check where the points can still connect reliably to each other, then test the connection in the room where you actually study once everything is installed.

    Multiple points need space and power, and running cables may also involve extra work.

  • Assuming different model variants or pack sizes are identical

    A different model name or a different number of points may mean the connections or setup won’t match what you need.

    Before buying, check the full model name, pack size and connections of the specific product.

Brands to consider

TP-Link

The Deco X50 is a mesh range available in packs of one, two or three points, for extending Wi-Fi to multiple areas.

  • TP-Link lists optional Ethernet backhaul and three gigabit ports per point for the Deco X50.
  • A pack’s stated coverage is a manufacturer claim, not a measurement in your home. Also check the difference between the Deco X50 and X50-PoE.

ASUS

The ZenWiFi XD4 Plus is a mesh option for a setup with existing Ethernet cabling.

  • ASUS lists Ethernet backhaul for the XD4 Plus when suitable cabling is available.
  • Wired backhaul on its own doesn’t tell you how much coverage your home will get. Check the exact model name and number of points.

FRITZ!

The FRITZ!Repeater 3000 AX is an option for extending coverage if you already use a compatible FRITZ!Box.

  • FRITZ! lists mesh compatibility with FRITZ!Box and two gigabit LAN ports for the repeater.
  • This device extends your network; it doesn’t replace a modem and router on its own. Check your existing equipment first.

NETGEAR

Orbi is a mesh range to consider if you want to place points some distance apart.

  • NETGEAR describes Ethernet backhaul between an Orbi router and satellites.
  • Documentation about wired connections doesn’t confirm that a specific set will suit your home; distance and construction still matter.

Products for this situation

This Joybuy selection includes mesh systems for Wi-Fi in multiple areas and one wired access point. Choose the access point only if you can run Ethernet to where it will be installed. The right number of points depends on your home and where you study.

ASUS ZenWiFi BT8 mesh system with two points

ASUS ZenWiFi BT8 (2-pack) Tri-Band Wi-Fi 7

A mesh system with two points for Wi-Fi in multiple areas. Check whether two points will suit the distance between your modem and the room where you study.

The product information lists tri-band Wi-Fi 7 on 2.4 GHz, 5 GHz and 6 GHz, plus AiMesh.

View at Joybuy
TP-Link Deco X50 mesh system with three points

TP-Link Deco X50 (3-pack) Dual-Band Wi-Fi 6

A mesh system with three points for coverage in multiple areas. Check where the points can still connect reliably to each other.

The product information lists dual-band Wi-Fi 6 on 2.4 GHz and 5 GHz, with optional Ethernet backhaul. TP-Link lists three gigabit ports per Deco X50 point.

View at Joybuy
TP-Link Omada EAP653 wireless access point

TP-Link Omada EAP653 access point

A wired access point for Wi-Fi in a fixed location, if you can run Ethernet to that spot. This is a single access point, not a mesh system with multiple points.

The product information lists Wi-Fi 6, Ethernet and PoE, with ceiling or wall mounting. Check how the required PoE power will be supplied in your setup.

View at Joybuy
ASUS ZenWiFi BT10 mesh system with two points

ASUS ZenWiFi BT10 (2-pack) Tri-Band Wi-Fi 7

A mesh system with two points for Wi-Fi in multiple areas. Consider whether the connection between them will suit the distance to the room where you study.

The product information lists tri-band Wi-Fi 7 on 2.4 GHz, 5 GHz and 6 GHz, and AiMesh.

View at Joybuy
TP-Link Deco XE75 Pro mesh system with three points

TP-Link Deco XE75 Pro (3-pack) Tri-Band Wi-Fi 6E

A mesh system with three points for Wi-Fi in multiple areas. Check the placement of the points and how well they connect in your home.

The product information lists tri-band Wi-Fi 6E on 2.4 GHz, 5 GHz and 6 GHz, and three Ethernet ports per point.

View at Joybuy

Frequently asked questions

Do I need to buy a new router straight away for online lessons?

No. First check the coverage where you study and see whether moving or adjusting your current router helps. The Consumers’ Association suggests improving your existing Wi-Fi as a possible first step. If there’s still a weak spot, you could consider an access point or mesh point.

Where should I place a wireless mesh point?

Place it somewhere it can still connect reliably to the rest of the network and reach the room where you study. Once it’s installed, check the connection in that room; a stated coverage area doesn’t determine the range you’ll get in your home.

Is wired backhaul useful for mesh?

Wired backhaul can connect the points to each other over Ethernet if you have suitable cabling. TP-Link and ASUS describe this option for the systems mentioned here. Check whether you have a cable route and spare connections at the locations you want to use.

Can I use my own router or modem in the Netherlands?

According to ACM ConsuWijzer, you’re free to choose your router, and using your own modem is usually possible too. A provider may refuse a device that’s unsafe or technically unsuitable under the stated conditions. If you’re replacing your modem, ask which settings and connection type are required.

What should I do about security updates after installation?

Check how to install firmware updates through the app or from the manufacturer, and enable automatic updates if possible. The Safe Internetting website recommends turning on automatic updates whenever that option is available.