If you can run a network cable to or near the study area, a wired access point or a suitable mesh node is a sensible option: the connection between the router and that point won’t have to pass wirelessly through thick walls. Without a cable, a repeater will only work if it can still receive a strong enough signal from the router in an intermediate location. If that isn’t possible, consider powerline and test the connection in the study area. The right choice comes down to how well it works during a trial call, not just its advertised maximum speed.
Who is this relevant to?
A pupil studying behind thick walls
Has a regular study spot with a weak router signal and may be able to run a network cable to it. The Consumentenbond recommends placing a repeater somewhere the signal is still usable, while TP-Link describes an access point mode for the RE705X.
A pupil with no option to run a cable
Has a study spot outside the router’s effective range and needs a suitable intermediate location for a repeater or a powerline connection. The Consumentenbond discusses where to place a repeater, while devolo notes that powerline performance depends, among other things, on the electrical installation.
A household with several study areas
Needs Wi-Fi in more than one area and must consider the connection between Wi-Fi points. The Consumentenbond describes Wi-Fi boosters, and FRITZ! provides information about extending coverage with FRITZ! Mesh.
What should you look for?
Choose the type of connection according to what’s practical in the study area; the Wi-Fi generation or maximum speed alone shouldn’t determine your choice.
| What to consider |
What to look for |
Who is this important for? |
| A reliable connection in one study area |
Check whether you can run a cable and whether the device has an Ethernet port and access point mode. Then test a lesson call in the intended location. |
If I mainly study in one regular spot, I want to avoid the picture or sound cutting out. Around 36% of consumers prioritise a reliable connection in that location when making this choice. |
| Installation without a network cable |
Find a socket in an intermediate location where the repeater can still receive the router’s signal. Check the signal indicator or app, then test a call in the study area. |
If I can’t run a cable, I need a suitable spot between the router and the room where I study. Around 29% of consumers prioritise installation without a cable when making this choice. |
| Coverage in several areas |
Decide which rooms need Wi-Fi and check whether each Wi-Fi point connects to the router wirelessly or via a cable. |
If lessons take place in different areas, I want to know where each Wi-Fi point is needed. Around 21% of consumers prioritise coverage in several areas. |
| An alternative when Wi-Fi can’t get through |
Check which adapters and sockets are needed, then test a real lesson connection in the intended location. |
If there’s no suitable intermediate location for a repeater, I need another way to connect to the study room. Around 14% of consumers prioritise an alternative to a wireless connection when making this choice. |
Common buying mistakes
-
Putting a repeater right behind the thick wall
The repeater needs a strong enough signal from the router to extend it. In the area with the weakest coverage, its own connection may already be too weak.
First, check for an intermediate location where the router’s signal is still available. If that doesn’t work, consider a wired access point or try powerline at home.
-
Assuming the Wi-Fi version or maximum speed guarantees a good lesson
The Wi-Fi version alone doesn’t tell you how the connection will perform in your home. A high advertised speed doesn’t, by itself, mean that the picture and sound will remain stable in the study area.
Consider the connection type and test the picture and sound during a call from the actual study area.
-
Assuming every mesh feature works with your existing router
Brand-specific mesh features may require a compatible router. Standard repeater or access point operation is a different mode.
Check your exact router model and the mode you want before choosing a device.
-
Assuming powerline works the same way in every home
According to devolo, transmission over your mains wiring depends, among other things, on the electrical installation and electrical interference.
Check which adapters you need and test the connection using the socket you plan to use in the study area.
Brands to compare
TP-Link
The RE705X is an option for wireless coverage extension or use as a wired access point.
- TP-Link lists a gigabit Ethernet port and access point mode for the RE705X.
- Don’t assume OneMesh will work with every router; check your existing router separately.
ASUS
The RP-AX58 is a suitable repeater option and, according to ASUS, can also be used with a wired connection in certain modes.
- ASUS lists Ethernet backhaul in AiMesh node or access point mode.
- AiMesh requires an AiMesh-compatible router; if you have a different router, check which modes it supports.
devolo
The WiFi 6 Repeater 5400 and the Magic 2 WiFi 6 next Starter Kit offer different options: repeater/access point and powerline respectively.
- devolo lists access point use with a network cable for the repeater, and network transmission over mains wiring for Magic.
- According to devolo, actual powerline performance depends, among other things, on the electrical installation and interference; the two products aren’t interchangeable.
FRITZ!
The FRITZ!Repeater 1200 AX is a good option for extending a FRITZ!Box network or adding another wired access point.
- FRITZ! describes Mesh with a FRITZ!Box and provides instructions for connecting the repeater via LAN.
- Don’t assume this brand-specific Mesh compatibility will work with a router from another brand without checking first.
Joybuy products
This selection includes mesh Wi-Fi points, wireless repeaters and wired access points for a study area behind thick internal walls.
Image unavailable
TP-Link Deco X50 (3-pack), Wi-Fi 6
Suitable for a household looking to place mesh Wi-Fi points in several areas.
Three units; dual-band (2.4 GHz/5 GHz) and Wi-Fi 6.
Three gigabit Ethernet ports per unit.
View at Joybuy
Image unavailable
Wifi Repeater Pro Black
Could suit a wireless setup if there’s an intermediate location with a strong enough router signal.
2.4 GHz; stated speed of up to 300 Mbps.
The product description lists a signal indicator.
View at Joybuy
Image unavailable
TP-Link Omada EAP653
A wired access point for a regular study area where a network connection is available.
Wi-Fi 6, dual-band and a gigabit Ethernet port.
The product information lists PoE+ power and ceiling or wall mounting.
View at Joybuy
Image unavailable
TP-Link TL-WA801N
The product description lists both access point use with Ethernet and wireless extender operation; choose the mode that suits your available connection.
2.4 GHz; up to 300 Mbps and two antennas.
The product information lists WPS and passive PoE.
View at Joybuy
Image unavailable
TP-Link Omada EAP613
A wired access point for Wi-Fi in a regular location where a network connection is available.
Wi-Fi 6 and an Ethernet port.
The product information lists PoE, passive PoE and DC power options, as well as ceiling or wall mounting.
View at Joybuy
Frequently asked questions
Where should I place a wireless repeater for lessons behind thick walls?
Put the repeater somewhere in between where it can still receive a strong enough signal from the router, rather than automatically placing it in the room with the weakest coverage. Check the placement guidance, then test a call in the study area.
Can I use a repeater connected by cable as an access point?
That depends on the exact model and mode you choose. TP-Link lists this option for the RE705X, ASUS for the RP-AX58 and devolo for the WiFi 6 Repeater 5400. Check the installation instructions for the version you’re considering.
What practical points should I consider beyond the purchase?
A Wi-Fi point uses electricity even when no lessons are taking place. Also check which firmware updates and support are available for the model you choose.
Which Dutch product regulations are relevant?
Radio equipment sold in the Netherlands must meet the applicable European requirements and carry the correct CE marking. The Dutch Authority for Digital Infrastructure advises checking the marking on the actual device; a product title alone doesn’t prove that the item meets the requirements.