Who is this buying guide for?

Students with a weak signal where they study

You take part in lessons with video and audio in a spot where the router signal is limited. The placement and connection at that spot matter more than the advertised top speed alone. Research commissioned by Ziggo and published by VodafoneZiggo has highlighted connection problems during video calls.

Users with a workspace that can be wired

You may be able to run a network cable to your shared workspace and want to compare a wired access point with a wireless repeater.

Households with several study spots

You need coverage in more than one room, so you’re comparing a solution for multiple locations with extending coverage in a single weak spot.

What should you look for when choosing?

Wireless repeater

A good fit if: you want to get a signal to one study spot and can’t or don’t want to run a cable there.

Bear in mind: the repeater itself still needs to receive a usable signal from the router; it can’t fix a weak connection before the signal reaches the device.

Wired access point

A good fit if: you can run a network cable to your study spot or somewhere nearby.

Bear in mind: you’ll need to arrange a cable route and a suitable connection.

Mesh system with multiple nodes

A good fit if: you need coverage in several rooms or across multiple floors.

Bear in mind: check that the mesh feature on the additional nodes works with your existing equipment; sharing a Wi-Fi name doesn’t prove that it does.

What to consider What should you check? Who is this important for?
Connection during lessons Check that the repeater’s location still has a usable router signal, then test the connection where you study. If I study in one regular spot, I want to be able to use video and audio there without the connection dropping. Around 36% of consumers considering this choice give a stable connection in that spot their top priority.
Wired workspace Check whether there’s a cable route and a suitable connection; see whether the device offers access point mode. If I can run a cable to my shared workspace, I want to know whether an access point is a better fit than extending Wi-Fi wirelessly. Around 29% of consumers give a wired connection at their workspace their top priority.
Coverage in several locations Work out how many rooms need coverage and check which devices can work together as one mesh system. For lessons in different parts of the house, I want to consider coverage in more than one room. Around 21% of consumers give coverage in several study spots their top priority.
Choosing the right product Check your router, the features you need and the installation options; don’t choose based solely on a Wi-Fi label. If I only need a simple extension, I don’t want to choose features my situation doesn’t call for. Around 14% of consumers give a suitable, straightforward purchase their top priority.

Common buying mistakes

  • Placing the repeater where the signal is already too weak

    A wireless repeater needs to stay within range of the router to extend its signal.

    Choose a midway spot and test the connection where you study. If there’s no usable signal at that midway point, compare a wired access point instead.

  • Assuming every repeater creates one mesh with every router

    Mesh features may depend on specific equipment. For example, TP-Link lists OneMesh compatibility with a suitable TP-Link router, while FRITZ! describes mesh networking with FRITZ! devices.

    Check the full model names of your router and additional node, and distinguish between ordinary Wi-Fi extension and the specific mesh feature mentioned.

    Extending a mesh system may mean adding or replacing equipment with compatible devices.

  • Treating the advertised top speed as a guaranteed lesson speed

    A speed rating alone doesn’t tell you how the connection will perform where you study.

    Assess the connection at your workspace using the devices and applications you use there.

Brands worth comparing

TP-Link

The RE605X is a Wi-Fi 6 repeater with gigabit Ethernet and access point mode, suitable for a single study spot or a potential wired setup.

  • TP-Link lists OneMesh compatibility with a suitable TP-Link router.
  • The standard repeater function isn’t the same as OneMesh. Advertised wireless speeds aren’t measured lesson speeds.

FRITZ!

The FRITZ!Repeater 1200 AX is a Wi-Fi 6 extender to consider if you already use FRITZ! equipment.

  • FRITZ! lists a gigabit LAN port and mesh compatibility with FRITZ! devices.
  • Check the exact version and make sure it works with the equipment you already use.

devolo

The WiFi 6 Repeater 3000 is worth comparing if you want to weigh up wireless extension alongside using the device as an access point.

  • devolo lists a gigabit LAN port, access point mode and mesh compatibility with other devolo Wi-Fi products.
  • The stated transfer speed is a manufacturer specification, not a guaranteed lesson speed.

ASUS

The RP-AX58 is a Wi-Fi 6 repeater to consider if you’re assessing existing ASUS equipment and AiMesh.

  • ASUS lists AiMesh for this model; check whether your router is compatible.
  • ASUS warns that 160 MHz on 5 GHz may not be available in some countries or regions.

Joybuy products for this Wi-Fi setup

These products are suited to extending coverage across several study spots, improving a weak Wi-Fi zone or setting up a workspace that can be wired. Before buying, check that the device and setup you choose are compatible with your router.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 2-pack

Suitable for consumers looking to extend coverage to several study spots; the product name lists two Deco units.

Joybuy
TP-Link Deco XE75 tri-band mesh Wi-Fi 6E

TP-Link Deco XE75 tri-band mesh Wi-Fi 6E

Suitable for consumers looking for mesh coverage across several study spots.

The product name lists tri-band on 2.4, 5 and 6 GHz, and Wi-Fi 6E.

Joybuy
TP-Link Deco X50 2-pack dual-band mesh Wi-Fi 6

TP-Link Deco X50 2-pack dual-band Wi-Fi 6

Suitable for consumers looking to extend mesh coverage across several locations.

The product name lists two bands: 2.4 and 5 GHz, with Wi-Fi 6.

Joybuy
WiFi Repeater Pro Black

WiFi Repeater Pro Black

Suitable for consumers looking to extend a weak but still usable router signal to a study spot.

The product information lists the 2.4 GHz band only.

Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N access point and Wi-Fi extender

Suitable for consumers who want to compare a workspace that can be wired with a wireless extension setup.

The product name lists WPS, Passive PoE, two aerials and N up to 300 Mbps. The product information lists the 2.4 GHz band only.

Joybuy

Frequently asked questions

Where should you place a wireless repeater for your study spot?

Place the repeater between the router and your study spot, somewhere it can still receive a usable signal from the router. A signal indicator can help you choose a socket; then test the connection where you take your lessons.

Does connecting your laptop to a repeater with an Ethernet cable make the whole connection wired?

No, not if the repeater itself connects to the router wirelessly. To have a wired connection all the way to the Wi-Fi access point, you’ll need a cable from your existing network and a suitable access point or a device with access point mode.

Where can you check the CE mark on a Wi-Fi booster?

Check that the correct CE mark is on the device you receive. The Dutch Authority for Digital Infrastructure says that equipment must carry the required CE mark; a model name alone doesn’t confirm what’s on the actual device.

Do you need a licence for ordinary home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, you don’t need a licence for home Wi-Fi if you use the frequencies intended for it and comply with the terms of use. This is separate from the mandatory CE mark on the equipment.

Should you consider power consumption or updates?

Yes. A Wi-Fi access point may stay on for long periods; the Dutch Consumers’ Association points out that routers and Wi-Fi boosters can use a significant amount of power while in use. Also check whether firmware updates are available for the model you choose.