Seminar attendee at the end of the corridor
Your video-calling space is outside the existing router’s good coverage. Your choice depends on where to place an extra Wi-Fi point and whether you can run a cable.
First check whether the internet connection itself is unreliable or whether the Wi-Fi is simply weak in your seminar space: a new router won’t automatically fix a problem elsewhere in your home. If you can run a cable to your workspace, a wired access point there could be a targeted solution. Wireless mesh is an option if the points along the corridor can still receive a strong enough signal from one another. Also check that the device is compatible with your provider’s equipment, how updates are delivered and whether the specific model meets the applicable requirements.
Your video-calling space is outside the existing router’s good coverage. Your choice depends on where to place an extra Wi-Fi point and whether you can run a cable.
You use several connected devices during sessions and want to check whether Wi-Fi coverage, network capacity and your internet connection are each up to the task.
You want better Wi-Fi without immediately replacing your provider’s modem or router. In that case, an extra compatible Wi-Fi point and how updates are managed are important considerations.
First work out whether the internet connection or the Wi-Fi in your seminar space is the limiting factor. Then check whether you can run a cable before choosing between a wired access point and wireless mesh.
When: if a wired test shows a good connection and the router is in a poor position, such as inside a utility cupboard.
Trade-off: moving it may require a longer cable, and it may not be enough if there are obstacles between the router and the corridor.
When: if you can run an Ethernet cable to or near your seminar space and Wi-Fi coverage there is poor.
Trade-off: running the cable and installation take some work, but the connection between the points won’t need to travel wirelessly through the corridor.
When: if running cables isn’t practical and there are spots along the corridor where the mesh points can still receive a strong enough signal from one another.
Trade-off: an extra point placed where the incoming signal is already weak may not help enough.
When: if tests indicate that the existing router itself is the problem, rather than your provider’s connection or simply the coverage at the end of the corridor.
Trade-off: a newer Wi-Fi version or a higher advertised speed doesn’t guarantee better coverage around obstacles.
| What to consider | What should you check? | Who should give this more weight? |
|---|---|---|
| Coverage in your seminar space | Test the connection in your workspace and at potential points in between. Also check for obstacles and available power sockets. | If my seminar space is at the end of the corridor, I want to know whether the Wi-Fi is strong enough there before choosing equipment. Around 36% of consumers say coverage in their seminar space is their top priority. |
| Whether you can use a cable | Check the cable route, available Ethernet ports and whether the model you choose supports a wired connection between points. | If I can run a cable to my workspace, I want to know which wired connection will work with my network. Around 29% of consumers say the option to use a wired connection is their top priority. |
| Video calls dropping out | Compare a wired test by the router with the connection in your seminar space, and test during your usual calls. | If my video calls keep dropping out, I want to find out first whether Wi-Fi or the internet connection is to blame. For around 21% of consumers, diagnosing the problem comes first. |
| Management and number of units needed | Check how updates are delivered, how many units you need and whether the device works with your provider’s connection. | If I want to keep my provider’s router or need multiple points, I look at how they’re managed and which model I actually need. Around 14% of consumers prioritise these considerations over coverage, wired connections and diagnosing call issues. |
Distance and obstacles can affect your connection. The Consumentenbond points out that the Wi-Fi version alone doesn’t tell you how well it will perform where you need it.
First check where your router is positioned and test the connection in your seminar space before choosing based on an advertised speed.
You may still need an extra Wi-Fi point or a cable route.
A wireless mesh point needs to receive a strong enough signal from another point to pass the connection on.
Test the spot you have in mind along the corridor. The Consumentenbond recommends keeping obstacles between Wi-Fi points to a minimum. If running a cable is practical, check whether your chosen model supports a wired connection between points.
You may need to try a different position, add another point or run a cable.
The pack size determines how many units you can actually place around your home; the same model name doesn’t mean the box contains the same number of points.
Check the full model specification and what’s included in the box before comparing products.
If the box contains fewer units than you need, you may have to buy an extra one.
The Deco X50 is a Wi-Fi 6 mesh system for anyone looking to position multiple Wi-Fi points.
The ZenWiFi XD5 is a Wi-Fi 6 mesh option for homes with several suitable places to position the units.
The FRITZ!Repeater 1200 AX is designed to extend an existing network, not replace a modem.
These product options are mesh kits with multiple Wi-Fi points. Compare the number of units and connection options with where you plan to place them. For the specific model, also check the relevant product documentation.
No image available
A mesh kit with multiple points to consider if you want to extend Wi-Fi coverage along the corridor.
Model: 2-pack. Wi-Fi 7, tri-band and 10, 2.5 and 1 Gbps WAN/LAN ports per unit, according to the product name.
No image available
A mesh kit with three units to consider if you need several places to position them.
Wi-Fi 6, dual-band (2.4 GHz/5 GHz).
No image available
A mesh kit with two units to consider if you’re planning a wired installation.
Wi-Fi 6, dual-band (2.4 GHz/5 GHz) and PoE, according to the product name; the product name lists two Ethernet ports per unit.
No image available
A mesh kit with three units to consider if you want to position Wi-Fi points in several places.
Tri-band (2.4 GHz/5 GHz/6 GHz), Wi-Fi 6E.
No image available
A mesh kit with two points to consider if you want to spread Wi-Fi coverage across several areas.
Wi-Fi 6, dual-band (2.4 GHz/5 GHz).
First, test with a computer connected to your home network using a network cable, then compare the result with the connection in your seminar space. Testing over Wi-Fi alone makes it harder to tell weak Wi-Fi apart from a problem with your internet connection.
Don’t automatically put it where reception is worst: the point still needs to receive a strong enough signal. The Consumentenbond recommends keeping obstacles between Wi-Fi points to a minimum and suggests trying a midway position if coverage further along is weak.
Check how firmware updates are provided for the specific device and install any available security updates. When choosing a device, also consider whether its update management suits the way you want to maintain it.
According to ACM ConsuWijzer, you’re free to choose your router, but your own device must be compatible with your provider’s connection. Check the connection requirements and settings you’ll need before replacing or adding a router.
The Rijksinspectie Digitale Infrastructuur outlines the applicable European requirements for radio equipment. Manufacturers apply a CE mark when a device meets them. Applicable RED 3.3 cybersecurity requirements have also been in force since 1 August 2025. Check the documentation for the specific model: a product listing alone doesn’t show that it meets the requirements.