Who is this choice relevant to?

Listening across multiple floors

If you want to play music on more than one floor, it’s particularly useful to plan where to place your Wi-Fi access points and whether you may need to add more. The Consumers’ Association (Consumentenbond) lists access points on multiple floors as one possible way to improve coverage.

Using a local music library

If you play music from a shared computer or NAS, you’ll need to make sure the shared folder is accessible over your home network, as well as check your Wi-Fi coverage. Sonos explains how to play music from a computer or NAS on a local network.

Dealing with a tricky connection between floors

If your wireless connection between floors is unreliable, check whether ethernet backhaul or powerline is practical. The right choice depends on the cabling available and the connection at the intended locations.

What should you consider when choosing?

First, work out whether the issue is Wi-Fi coverage, the connection between access points or access to your shared music library. Each one needs different checks.

What to consider What should you check? Who is this most important to?
Coverage where you listen Check where the access points can go and test the connection on the floors where you listen. If I want to play music on multiple floors, I prioritise a usable signal in every listening spot. Around 29% of consumers put coverage first.
Access to your music library Check that your computer or NAS is sharing the folder and that your players can access it over the local network. If you use music stored on a shared computer or NAS, you’ll want to make sure your players can actually access the files. Around 24% of consumers say access to the library is their main concern.
Connection between Wi-Fi access points Check whether ethernet backhaul is possible. If you can’t run a cable, assess a wireless setup or powerline in your home. If a floor gets in the way of the wireless connection or you have a network cable available, the connection between the router and access point is especially important. Around 29% of consumers give this connection top priority.
Setup and expansion Check how many access points are included, whether you can add more and which features are available in the network mode you choose. If you want to keep setup simple and compare buying with the option to rent, consider the management involved and any ongoing costs. Around 18% of consumers put these factors first.

When buying in the Netherlands, wireless networking equipment must meet the applicable European requirements. The Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) states that the CE mark must appear on the equipment. Check the mark on the specific model you’re buying.

Common buying mistakes

  • Focusing only on maximum Wi-Fi speed or a coverage figure

    A stated speed or range won’t tell you how the connection will perform through the floors and in the listening spots in your home.

    Choose the number of access points based on where you listen, then test the connection once they’re in place. The Consumers’ Association describes testing at different locations and distances.

    If coverage is inadequate, you may need an extra access point or a different connection between floors.

  • Confusing wider Wi-Fi coverage with access to your music folder

    An extra access point won’t automatically make a folder on your computer or NAS shared or accessible.

    Test access to the folder first. Sonos says that the app and players need to be on the same Wi-Fi network and that guest networks aren’t compatible.

  • Choosing a multi-point setup without checking the connection between points

    Each access point needs a connection to the rest of your network. A usable signal where you place it can therefore make all the difference.

    Check whether ethernet is available. If not, assess a wireless setup or test powerline in your home.

    Running a network cable or choosing a different way to connect may involve extra work.

  • Renting an access point from your provider without factoring in the ongoing cost

    Renting and buying are different ways to use Wi-Fi access points. The terms for provider equipment may depend on your subscription.

    KPN offers SuperWifi rental to existing customers. Compare renting and buying over the same period of use, and check the latest subscription terms.

    If you rent, the costs may continue for as long as you use the access point.

Brands to consider

TP-Link

Deco X10 is an expandable Wi-Fi 6 mesh option for listening in multiple places. According to the Consumers’ Association, the two-unit version they tested has two ethernet ports per unit.

  • TP-Link describes setup through the Deco app. Ethernet backhaul may still be available in access point mode.
  • According to TP-Link, in access point mode the main router manages the clients, and some advanced features aren’t available in the Deco app. The stated coverage doesn’t guarantee a signal in every home.

FRITZ!

According to the manufacturer, the FRITZ!Repeater 1200 AX is a standalone Wi-Fi 6 extender that can connect wirelessly or through its gigabit LAN port.

  • The manufacturer describes using it with a FRITZ!Box in mesh mode, or with other routers as a standard extender.
  • Check which features are available with your router. The stated maximum Wi-Fi speed isn’t a measure of how music streaming will perform.

devolo

According to devolo, Magic 2 WiFi 6 next combines Wi-Fi with network transmission over your mains wiring.

  • The manufacturer offers a starter set and a multi-room set with several adapters.
  • Test the connection in your own home. According to devolo, older dLAN adapters aren’t compatible with the Magic range mentioned here.

KPN

SuperWifi is a provider option for anyone who wants to use KPN equipment and its associated support.

  • KPN offers rental as an option for existing customers.
  • Availability and terms depend on your subscription. This doesn’t say anything about the performance of other brands.

Joybuy products for listening in multiple places

These Joybuy products are mesh systems designed to provide Wi-Fi in multiple listening spots. For the Dutch market, check the CE mark on the specific model being offered. The Dutch Authority for Digital Infrastructure states that it must appear on the equipment.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 (2-pack)

A two-unit mesh system for extending Wi-Fi to multiple listening spots.

The set name indicates that it includes two mesh units.

View at Joybuy
TP-Link Deco E4 3-pack, dual-band, Wi-Fi 5

TP-Link Deco E4 (3-pack), dual-band, Wi-Fi 5 (2.4 GHz/5 GHz)

A three-unit mesh system for Wi-Fi in multiple areas of your home.

The product name specifies dual-band Wi-Fi 5 (2.4 GHz/5 GHz). The network ports are rated at up to 100 Mbps, so bear this in mind if you’re connecting devices by cable.

View at Joybuy
TP-Link Deco X50 3-pack, dual-band, Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band, Wi-Fi 6 (2.4 GHz/5 GHz)

A three-unit mesh system for listening in different areas of your home.

The product name specifies dual-band Wi-Fi 6 (2.4 GHz/5 GHz).

View at Joybuy
TP-Link Deco X50-POE 2-pack, dual-band, Wi-Fi 6

TP-Link Deco X50-POE (2-pack), dual-band, Wi-Fi 6 (2.4 GHz/5 GHz)

A two-unit mesh system for anyone considering a wired setup.

The product name specifies PoE and dual-band Wi-Fi 6 (2.4 GHz/5 GHz). Check that PoE is suitable for your planned setup.

View at Joybuy
TP-Link Deco XE75 Pro 3-pack, tri-band, Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), tri-band, Wi-Fi 6E (2.4 GHz/5 GHz/6 GHz)

A three-unit mesh system for multiple Wi-Fi access points around your home.

The product name specifies tri-band Wi-Fi 6E (2.4 GHz/5 GHz/6 GHz).

View at Joybuy

Frequently asked questions

Will a Wi-Fi extender automatically give me access to my music library?

No. A Wi-Fi extender won’t automatically share a music folder. Sonos explains how to play music from a computer or NAS on a local network; for a NAS used with the Sonos app, Sonos specifies SMBv2 or SMBv3. If you don’t use Sonos, check the requirements of your own music system.

Can I put my Sonos players and control app on a guest network?

According to Sonos, no. The device running the Sonos app needs to be connected to the same Wi-Fi network as your Sonos system, and guest networks aren’t compatible. This requirement applies to Sonos and isn’t a general networking requirement for all music players.

Where should I place a wireless extender?

Place it somewhere the router’s signal is still usable. KPN recommends positioning it halfway between the router and the area that needs better coverage. Once it’s installed, check the connection where you listen.

What changes when I set Deco to access point mode?

According to TP-Link, the main router then manages the clients, while some advanced Deco features aren’t available. TP-Link also says that ethernet backhaul remains possible and that you should set up Deco in the app before switching to access point mode.

What compliance check should I make when buying in the Netherlands?

Check for the CE mark on the specific model being offered. The Dutch Authority for Digital Infrastructure states that radio equipment must meet the applicable European requirements and that the CE mark must appear on the equipment. A product name or online shop listing alone doesn’t confirm that the mark is present.