Presenter using several floors
You use a laptop or screen on different floors and want to know where the Wi-Fi falls short during presentations.
Start by checking the connection in the places where you present. A wireless repeater needs a usable signal from your router, while an access point can use an existing network cable. If you need extra Wi-Fi points on several floors, mesh could be an option, but check that it’s compatible with your router. A stated Wi-Fi speed doesn’t guarantee coverage through floors, and with Google Cast, the sending device and the screen must be able to reach each other over the network.
You use a laptop or screen on different floors and want to know where the Wi-Fi falls short during presentations.
You have a network connection on another floor and want to know whether you can connect a Wi-Fi access point there.
You share your screen wirelessly and need to check that the sending device and the receiving screen can reach each other on the local network.
First, map out your presentation areas and the network connections available. Then choose between wireless repeating, a wired access point or several mesh points.
| What to consider | What should you check? | Who is this most relevant for? |
|---|---|---|
| Coverage in presentation areas | Make a note of your work areas and possible locations for extra Wi-Fi points; check the connection in each place. | If I present on several floors, I want to know whether there’s usable Wi-Fi in every work area. Around 36% of consumers put coverage in all presentation areas first. |
| Connection to the router | Check whether Ethernet is available. If you’re going wireless, see whether the repeater can receive a signal from the router in the planned location. | If I place a Wi-Fi point on another floor, I want it to have a usable connection to the router. Around 29% of consumers give this connection top priority. |
| Presenting to a screen | For Google Cast, check the network connection of both devices and the AP or client isolation setting. | If I cast to a screen, I want my sending device and the screen to be able to communicate. Around 21% of consumers put this connection first. |
| Purchase, installation and aftercare | Check how many Wi-Fi points and cables you’ll need, the features of the exact model and the CE marking on the version you’re considering. | If I buy an extension, I want to know in advance which parts and connections I’ll need, and what to check after purchase. Around 14% of consumers focus on purchase, installation and aftercare. |
A wireless repeater needs to receive the router’s signal itself. Simply moving it closer to the presentation area won’t necessarily fix a weak connection back to the router.
Check the signal both where you plan to put the repeater and in the presentation area. If a network cable is available, see whether a wired access point would work.
A nominal Wi-Fi speed doesn’t tell you whether the signal will be usable on every floor.
Assess the connection in the places where you present, and compare an extra Wi-Fi point with a wired connection if needed.
With Google Cast, AP or client isolation can prevent the sending device and the receiving screen from communicating.
For Google Cast, check the network connection of both devices and the relevant isolation settings. Other presentation methods may have different network requirements.
The RE605X and RE705X are Wi-Fi 6 repeaters with access point mode. Check that the exact model supports the feature you want.
The FRITZ!Repeater 3000 AX is a tri-band Wi-Fi 6 option with two gigabit LAN ports, for anyone looking into a compatible FRITZ! mesh setup or a wired connection.
According to devolo, the WiFi 6 Repeater 5400 can also be used as a wired access point.
According to NETGEAR, the EAX15 is a Wi-Fi 6 mesh extender with a gigabit Ethernet port for extending an existing network.
These product options range from a Wi-Fi booster and an access point to mesh systems with multiple units. Consider which solution suits the network cables you have available and the number of presentation areas you need to cover. Model specifications don’t guarantee coverage on every floor.
Image unavailable
A mesh system to consider if you want to cover several presentation areas and can use a suitable wired backhaul.
Wi-Fi 7; dual-band on 2.4 GHz and 5 GHz. Wired backhaul requires a suitable Ethernet connection.
Image unavailable
A wireless Wi-Fi booster to consider if you want to extend an existing Wi-Fi zone and the repeater can receive a signal from the router where you place it.
According to the product description, it supports 802.11b/g and Wi-Fi 4 (802.11n), up to 300 Mbit/s, with an Ethernet port.
Image unavailable
A mesh system with multiple units to consider if you want to add Wi-Fi points in several presentation areas.
Wi-Fi 6; three gigabit Ethernet ports per unit.
Image unavailable
An access point to consider if you have a suitable Ethernet connection; the product description also mentions range extender mode.
2.4 GHz; up to 300 Mbit/s; 10/100-Mbit/s Ethernet. Lists WPS and Passive PoE. Use as a wired access point requires a suitable Ethernet connection.
Image unavailable
A mesh system with three units to consider if you want to add Wi-Fi points in several presentation areas.
Tri-band Wi-Fi 6E on 2.4 GHz, 5 GHz and 6 GHz; three gigabit Ethernet ports per unit.
Place the booster where it can still receive a usable signal from the router, then check the connection on the floor where you present. TP-Link describes a signal indicator on the RE605X to help you position it.
Check that the sending device and the screen are connected to the intended Wi-Fi network, and that AP or client isolation isn’t preventing them from communicating. Google lists these requirements for Cast; they don’t automatically apply to every presentation method.
Check the support page for the exact model to see whether firmware updates are available, and follow the manufacturer’s installation instructions. Don’t change the setup just before an important presentation without testing it in every work area.
No. When you buy as a consumer, your statutory guarantee applies alongside any manufacturer’s or seller’s warranty. According to the Dutch government, the Netherlands has no fixed statutory guarantee period; if a product is faulty, contact the seller.
Radio equipment placed on the European market must meet the applicable European requirements and carry the correct CE marking for that specific version. The Dutch Authority for Digital Infrastructure advises against using equipment without the correct CE marking; check the marking on the version you intend to buy.