Who is this relevant for?

Uploading photos on multiple floors

You upload photos in different parts of your home and notice that the connection varies from floor to floor. Measure the connection in those places, then see where you could position Wi-Fi points. Consumentenbond recommends taking the placement of Wi-Fi equipment into account.

Slow uploads, even close to the router

If uploads are slow even close to the router, first check the upload speed of your internet connection. Extra Wi-Fi coverage won’t change the speed of your package; Consumentenbond points out that a slow connection can also be caused by your internet service.

Network cables between floors

If you can connect floors with cables, check whether the system you choose supports Ethernet backhaul, and find out which ports and connection method are required. TP-Link describes various connection options for Deco, depending on whether it’s in router or access point mode.

What should you look for when buying?

Keep your current router

Choose this option if: uploads are slow even close to the router and you want to investigate your internet connection first.

Trade-off: this could prevent an unnecessary replacement, but it won’t automatically fix weak Wi-Fi on other floors.

Wi-Fi points with Ethernet backhaul

Choose this option if: uploads are good close to the router but slower on other floors, where network cables are available.

Trade-off: the cabling and connection method need to suit the chosen system and mode of use.

Wireless mesh system

Choose this option if: running cables between floors isn’t practical and you need extra Wi-Fi in several places.

Trade-off: the connection between points still depends on their placement and obstacles in your home.

What to consider What should you check? Who is this important for?
Wi-Fi on multiple floors Measure the connection where you upload and work out where Wi-Fi points could go; don’t choose based only on the advertised range. If I upload photos on different floors, I want to know whether the connection is usable in those places. Around 36% of consumers put coverage first.
Upload speed of your internet connection Compare the upload speed next to the router and on other floors with the speed included in your package. If uploads are slow even next to the router, I want to find out first whether my internet connection is the limiting factor. Around 29% of consumers want to assess their connection’s upload speed first.
Connection between Wi-Fi points Check what cabling is available and, for each model, check its backhaul function, ports and connection method. If I can use cables between floors, I want to know which connection suits my home and chosen system. Around 21% of consumers want to decide on cabling and the connection between points first.
Purchase and ongoing management Check what’s included in the set, the power supply required, the ports and the options for updating and securing the router. When choosing equipment, I also want to know what installation and ongoing management involve. Around 14% of consumers put purchase and management first.

Common buying mistakes

  • Assuming a higher Wi-Fi speed means faster internet uploads

    Your internet connection’s upload speed and your home Wi-Fi connection can each be a limiting factor. A new router won’t increase the speed of your package.

    First, measure the speed next to the router and on the floor where uploads are slow. Consumentenbond recommends including your internet connection in your diagnosis.

  • Taking the advertised range as a guarantee for every floor

    Obstacles and the placement of Wi-Fi points affect the connection in your home. An advertised coverage area alone won’t tell you how uploads will perform in every spot.

    Work out where you could position the points and test the connection there before choosing the size of your set. Consumentenbond recommends taking placement and obstacles into account.

  • Treating the Deco X50 and Deco X50-PoE as the same model

    TP-Link lists different connection and power features for these models. According to the manufacturer, the standard Deco X50 has three gigabit ports per point, while the X50-PoE supports PoE and has two 2.5Gbps ports per point.

    Check the full model name, set size, ports and power method of the version you’re considering. PoE is only relevant if the power supply and mounting suit your installation.

Brands to consider

TP-Link

The Deco range includes the standard X50 mesh system and the separate X50-PoE. The features below are specific to these models; they aren’t measurements of upload performance in your home.

  • TP-Link lists three gigabit ports per point for the standard Deco X50, and PoE with two 2.5Gbps ports per point for the X50-PoE.
  • Check which model, power supply and connection method suit your cabling.

ASUS

According to ASUS, ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh system with AiMesh expansion.

  • ASUS lists wired backhaul and two 2.5Gbps ports per point for the 3-pack.
  • Check the set size and compatibility with your existing equipment; the stated speed and coverage are manufacturer claims.

NETGEAR

According to NETGEAR, the Orbi RBK763S is a tri-band Wi-Fi 6 set with a router and two satellites.

  • NETGEAR lists a dedicated router-to-satellite connection and seven gigabit ports for the set.
  • The stated coverage and capacity aren’t a guaranteed measure of upload performance across your floors.

Joybuy products for Wi-Fi on multiple floors

These Joybuy products are mesh systems for Wi-Fi in multiple areas, with options for wired or wireless connections between points and, for one model, powerline using your existing electrical wiring.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 2-pack

Worth comparing if you need Wi-Fi in several places and want the option of wired or wireless backhaul.

The product description lists tri-band Wi-Fi 7, mesh and Ethernet ports on each point.

View at Joybuy
TP-Link Deco PX10 mesh system with powerline

TP-Link Deco PX10 dual-band Wi-Fi 6

Consider this if you want to compare a mesh connection with a network connection that uses your existing electrical wiring.

The product information lists Wi-Fi 6, powerline and Ethernet ports on each unit.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 3-pack

Suitable for comparing mesh points for different areas of your home if you want the option of using Ethernet backhaul.

Dual-band Wi-Fi 6; TP-Link lists three gigabit ports per point for the standard Deco X50.

View at Joybuy
ASUS ZenWiFi BT10 mesh system, 2-pack

ASUS ZenWiFi BT10 2-pack

Worth comparing if you’re looking for a mesh system with AiMesh expansion to provide Wi-Fi in several places.

The product name lists tri-band Wi-Fi 7; the product description mentions AiMesh expansion.

View at Joybuy
TP-Link Deco X50-PoE mesh system, 2-pack

TP-Link Deco X50-PoE 2-pack

Worth comparing if you want to set up several mesh points and PoE suits your installation as a power option.

Dual-band Wi-Fi 6; the product information lists PoE and two Ethernet ports per point.

View at Joybuy

Frequently asked questions

Should I buy a new router if a photo album uploads slowly?

Not before you’ve measured to find the cause. If uploads are slow even close to the router, compare the measured upload speed with your package. If the problem is mainly on another floor, investigate the Wi-Fi coverage there. Consumentenbond points out that a slow internet connection can also be caused by your internet service.

Can I connect Wi-Fi points on different floors with a cable?

Yes, with systems that support Ethernet backhaul. For Deco, TP-Link describes different connection options for router and access point modes; check the instructions for your model and mode.

What maintenance does a router you own require?

Keep the firmware up to date and change the default administrator passwords. VeiligInternetten warns that outdated routers and default passwords can pose security risks.

Can I use my own router in the Netherlands, and do I need a licence for ordinary home Wi-Fi?

According to ACM ConsuWijzer, you have the freedom to choose your router, provided the device meets the applicable requirements; ask your provider for the necessary connection settings. The Dutch Authority for Digital Infrastructure gives Wi-Fi as an example of licence-exempt frequency use, subject to the applicable conditions.

What legal product requirements apply to new wireless equipment?

The Dutch Authority for Digital Infrastructure states that stricter European requirements have applied since 1 August 2025 to wireless devices placed on the EU market. This doesn’t by itself establish whether a specific product on offer meets them; check the product information for the exact model.