Don’t rush into buying a new router: first, test your internet connection using a wired connection, then check the Wi-Fi where you watch. If the connection isn’t good enough there, moving your router to a better position or adding one wired access point may be all you need. If several areas have a weak signal, a mesh system could be a good fit, as long as you consider how the units connect to each other.
Who is this relevant to?
Anyone with a weak Wi-Fi signal upstairs
Does your film keep buffering on another floor, even though the internet works well near the router? The Consumentenbond points out that walls and ceilings can interfere with the Wi-Fi signal, so check where you need extra coverage.
Households with network cables between floors
If you can connect your access points using cables, you can compare whether Ethernet backhaul is right for your home and where you plan to put the units. TP-Link describes Ethernet backhaul as an option for the Deco X50.
Anyone who wants to identify the cause first
Want to avoid buying a different router or a faster broadband package unnecessarily? Compare the connection near the router with the one where you watch before deciding whether the problem lies with your internet connection or your home Wi-Fi.
What should you consider when choosing?
Move your existing router
Choose this if: your wired connection is good enough and moving the router to a more central or higher position improves Wi-Fi where you watch.
Bear in mind: moving the router may not be enough if floors continue to block the signal.
Add a wired access point
Choose this if: Wi-Fi is weak mainly on one floor and you can connect a network cable there.
Bear in mind: you’ll need to run a cable and may need extra equipment.
A mesh system with multiple units
Choose this if: several viewing areas on different floors lack coverage.
Bear in mind: you’ll need to find space and power for several units. With a wireless setup, also compare how the units connect to each other.
Start by checking the connection where you watch. Then work out how many extra units you need and how they’ll connect to each other.
| What to consider |
What should you check? |
Who is this important to? |
| Coverage where you watch |
Test Wi-Fi where you watch. Check whether you can move the router and how many extra units you might need. Manufacturers’ coverage claims in square metres don’t predict how the signal will travel through the floors in your home. |
If films keep buffering upstairs while Wi-Fi works downstairs, I want to know where I need extra coverage. Around 33% of consumers say coverage where they watch is their main concern. |
| Connection between access points |
Check whether you can run Ethernet between floors. If you can’t use a cable, consider the model’s wireless backhaul setup. |
If I place units on different floors, I want to know how they connect to each other. Around 27% of consumers prioritise this connection. |
| Reliable streaming |
Test the connection near the router and on your playback device. Netflix recommends a stable connection of at least 15 Mbps for 4K streaming. This is a service-specific recommendation, not a router specification. |
If a film keeps stopping, I want to check first whether the connection where I’m watching is the problem. Around 20% of consumers prioritise reliable playback. |
| Compatibility with your existing network |
Check what network equipment you already use, how many units you need and whether the router or access point mode you want is available. |
If my existing equipment is still usable, I only want to add what I need. Around 13% of consumers want to avoid unnecessary purchases. |
| Product safety and updates |
Check that the exact version has the correct CE marking; the Dutch Authority for Digital Infrastructure lists Wi-Fi routers as equipment for which this marking is important. Also check how firmware updates are provided. |
If I’m choosing a router to use for a long time, I want to consider its security and support. Around 7% of consumers say this is their main buying concern. |
Common buying mistakes
-
Assuming a faster broadband package will improve Wi-Fi upstairs
A good connection near the router can still mean weak Wi-Fi behind walls and ceilings.
Compare a wired test near the router with one where you watch before changing your package.
-
Taking the stated coverage or combined Mbps as your film-streaming speed
Manufacturers’ coverage figures and combined Wi-Fi capacity aren’t measurements of the speed you’ll get through the floors in your home.
Consider where you place the units and how they connect to each other, then test the connection on your playback device.
-
Buying a PoE access point without a compatible power source
According to TP-Link, the Deco X50-PoE supports PoE via IEEE 802.3at and 802.3bt, but not 802.3af.
Check the standard and available power of your PoE power supply, or use the supplied DC adapter where appropriate.
Brands to compare
TP-Link
The Deco models offer expandable mesh setups, with options varying by model.
- TP-Link lists Ethernet backhaul as an option for the Deco X50. The Deco X50-PoE supports power via compatible Ethernet equipment.
- The standard X50 and the X50-PoE are different models. Stated speeds and coverage aren’t measurements of performance in your home, and PoE requires a compatible power source.
ASUS
The ZenWiFi AX (XT8) is a tri-band mesh system where the second 5GHz band can be set up for wireless backhaul. Ethernet backhaul is also possible.
- ASUS describes a choice between wireless backhaul and an Ethernet connection between the units.
- According to ASUS, some features require compatible devices. A stated total Wi-Fi speed isn’t the speed you’ll get on a single television.
NETGEAR
The Orbi 370 series includes the RBE373 set, with a router and two satellites.
- For the European RBE373 specification, NETGEAR lists dual-band Wi-Fi 7 and 2.5Gb Ethernet ports. The manufacturer states a combined speed of up to 3.6 Gbps.
- That combined speed isn’t a measured speed on a single playback device. A newer generation of Wi-Fi doesn’t, by itself, mean films will play better.
Joybuy products
These Joybuy products are mesh systems designed to extend Wi-Fi coverage to several areas of your home. Compare how the units connect to each other, their ports and the power they need for each model. Also check that the exact version has the correct CE marking.
No image available
TP-Link Deco PX10
A mesh system with Powerline backhaul may be a good fit if you want to put units in areas where walls or floors weaken the Wi-Fi signal.
Dual-band Wi-Fi 6; Powerline backhaul; three Gigabit Ethernet ports per unit; router or access point mode. Check that the Powerline connection is compatible with your home’s electrical wiring.
Joybuy
No image available
TP-Link Deco X50 (3-pack)
This set of three mesh units is an option if you want to extend Wi-Fi to several areas of your home.
Dual-band Wi-Fi 6; three Gigabit Ethernet ports per unit.
Joybuy
No image available
TP-Link Deco XE75 Pro (3-pack)
This tri-band mesh set with three units may be a good fit if you need several network points and want to compare the wired connections too.
Tri-band Wi-Fi 6E; two Gigabit Ethernet ports and one 2.5-Gigabit Ethernet port per unit.
Joybuy
No image available
TP-Link Deco XE75
This tri-band mesh system is an option for extending Wi-Fi to different areas of your home using multiple units.
Tri-band Wi-Fi 6E; three Gigabit Ethernet ports per unit. The product description lists a set of three units.
Joybuy
No image available
TP-Link Deco X50-PoE (3-pack)
This mesh set with three units may suit you if you want to install several access points and are considering power over Ethernet.
Dual-band Wi-Fi 6; two Ethernet ports per unit. According to TP-Link, this model supports PoE via IEEE 802.3at and 802.3bt, but not 802.3af. Check that your power equipment is compatible.
Joybuy
Frequently asked questions
Do I need to buy a new router straight away to watch a film on another floor?
No. First, test your internet connection using a wired connection, then check the Wi-Fi where you watch. Try moving your existing router to a better position too. You can then decide whether you need an extra access point.
How do I position and power a Deco X50-PoE access point?
According to TP-Link, you can power the Deco X50-PoE using the supplied DC adapter or compatible PoE equipment. For PoE, this model supports IEEE 802.3at and 802.3bt, but not 802.3af. So check the standard and available power of any PoE switch you plan to use.
Can I use my own router in the Netherlands instead of my provider’s?
Yes. ACM ConsuWijzer confirms that you’re free to use your own router. Ask your provider which connection settings you need, and keep your router up to date.
Does the stated manufacturer’s warranty cover everything?
Not necessarily. ACM ConsuWijzer distinguishes between a manufacturer’s or seller’s warranty and your statutory rights. With normal use, a product must meet what you could reasonably expect from it, and the seller is responsible for this.
Which marking should I check on a Wi-Fi router?
Check that the exact version has the correct CE marking. The Dutch Authority for Digital Infrastructure specifically lists Wi-Fi routers as equipment for which this marking is important.