Who is this advice for?

Listener with poor Wi-Fi upstairs

Your internet works downstairs, but downloads struggle on another floor. First, test your broadband connection, then check the Wi-Fi where you listen. The Consumers’ Association advises connecting a computer to your home network by cable when running a speed test.

Resident with weak Wi-Fi on several floors

You want Wi-Fi in several parts of your home and need to decide how the extra access points will connect to each other: using an existing network cable or wirelessly. Ziggo points out that the number of access points you need depends partly on their placement and your home’s layout.

User who wants to keep their provider’s router

You want to improve coverage without replacing your existing router and connection unnecessarily. Check how an extender will connect to your equipment. ACM ConsuWijzer says providers cannot require you to use a particular router brand or model.

What should you consider when choosing?

First, work out whether the limitation is your broadband connection or just the Wi-Fi. Then choose between moving your router, adding a suitable access point or investing in a mesh system, depending on which areas need coverage.

What to consider What to look for when buying Who is this important for?
Wi-Fi where you listen Test your connection by cable next to the router, then check the Wi-Fi where you download. See whether moving the router could improve coverage. If I mainly listen upstairs, I want to know whether the Wi-Fi is good enough there. Around 36% of consumers say coverage where they download is their main concern.
Connection between access points Check whether network cables are available. Without a cable, a wireless access point needs to be placed where it can still receive a usable signal; powerline performance depends on your home’s electrical wiring. If Wi-Fi is weak on several floors, I want to know how the access points can connect to each other. Around 29% of consumers prioritise this connection.
Compatibility with existing equipment Decide which device will continue to act as your router, and check how the specific system connects and which operating mode it uses. If I want to keep my provider’s router, I need an extender that suits my existing setup. Around 21% of consumers prioritise compatibility with their current equipment.
Overall cost and management First compare the cost of adjusting your current setup with adding extra access points. Factor in any cabling work, and check how your router receives updates. If downloading an audiobook is my main concern, I don’t want to buy a bigger system than I need. Around 14% of consumers say cost and management are their main concerns.

Common pitfalls

  • Upgrading to a faster package before testing your Wi-Fi

    A slow broadband connection and weak Wi-Fi coverage on one floor are two different possible causes. A faster connection won’t automatically fix poor coverage around your home.

    First, test your connection by cable next to the router, then check the Wi-Fi where you download.

  • Putting a wireless access point in the worst Wi-Fi spot

    The extra access point still needs a usable connection to your network. Ziggo recommends placing its wireless pods where the Wi-Fi signal is still good.

    Test the connection in the spot you have in mind and, if necessary, try a position closer to the router.

  • Assuming the advertised mesh coverage guarantees a signal on every floor

    Floors, walls and the layout of your home all affect coverage. General coverage figures can’t tell you what results you’ll get at home.

    Test the spots where you actually download, then decide how many access points you need. Ziggo lists the size, shape, materials and layout of your home as factors.

  • Assuming a rented provider access point will work with any service

    KPN states that its rented SuperWifi access point can only be used with KPN Internet.

    Before renting or buying, check the terms for the specific access point on offer.

Brands to consider

TP-Link

The Deco X50 is an expandable Wi-Fi 6 mesh system; the Deco PX50 adds a powerline connection between access points.

  • TP-Link says the Deco X50 supports optional Ethernet backhaul between Deco units.
  • How well the Deco PX50’s powerline connection works depends on your home’s electrical wiring.

ASUS

ASUS describes the ZenWiFi XD5 as a Wi-Fi 6 mesh system, also available as a three-piece set.

  • The three-piece set gives you several placement options.
  • You need a compatible Wi-Fi 6 device to benefit from Wi-Fi 6. ASUS also states that 160 MHz on 5 GHz is not available in every region.

FRITZ!

The FRITZ!Repeater 3000 AX is a Wi-Fi 6 extender for a compatible existing network.

  • FRITZ! lists three radio bands and two Gigabit LAN ports. The manufacturer says it works with a FRITZ!Box as part of its mesh network.
  • The repeater extends your network; it is not a complete replacement for your internet router.

KPN

SuperWifi access points are a provider-specific option worth considering if you already have a KPN connection.

  • A provider-supplied access point could be an option if you want to extend your existing KPN setup.
  • KPN says rented SuperWifi access points can only be used with KPN Internet. This restriction does not automatically apply to purchased access points or other models.

Ziggo

For its equipment, Ziggo describes both wired and wireless ways to extend your network, including pods and a Deco setup.

  • A wired connection is worth considering if you have cables and suitable ports available.
  • According to Ziggo, the number of access points you need depends partly on your home’s materials and layout.

Joybuy products

This selection focuses on mesh systems with multiple units for Wi-Fi across different floors. For each model, check that the connection between access points suits the cabling and equipment in your home.

TP-Link Deco X50 (3-pack)

TP-Link Deco X50 (3-pack)

A mesh system with three units, giving you several placement options. TP-Link says optional Ethernet backhaul is available between Deco units; check whether you have cables between the places where you want to use them.

Dual-band (2.4 GHz/5 GHz), Wi-Fi 6 (802.11ax).

Joybuy
TP-Link Deco XE75 Pro (3-pack)

TP-Link Deco XE75 Pro (3-pack)

A three-piece mesh system for setting up multiple Wi-Fi access points around your home. Check the connection type you need and how the units will connect between floors before buying.

Tri-band (2.4 GHz/5 GHz/6 GHz), Wi-Fi 6E (802.11ax).

Joybuy
TP-Link Deco XE75 (3-pack)

TP-Link Deco XE75 (3-pack)

This three-unit mesh system gives you several placement options. Check which setup and connection type will work on your floors.

Tri-band (2.4 GHz/5 GHz/6 GHz), Wi-Fi 6E (802.11ax).

Joybuy
TP-Link Deco X50-PoE (3-pack)

TP-Link Deco X50-PoE (3-pack)

A three-piece set for placing several access points using a wired connection. Check that your home has the necessary cables and ports.

Dual-band (2.4 GHz/5 GHz), Wi-Fi 6 (802.11ax), PoE and two Ethernet ports.

Joybuy
TP-Link Deco X50 (2-pack)

TP-Link Deco X50 (2-pack)

A mesh system with two units for adding extra Wi-Fi access points. TP-Link says optional Ethernet backhaul is available between Deco units; check whether you have cables between the places where you want to use them.

Dual-band (2.4 GHz/5 GHz), Wi-Fi 6 (802.11ax).

Joybuy

Frequently asked questions

Should I get a faster internet connection if an audiobook downloads slowly upstairs?

Not until you’ve checked where the problem lies. Test the connection using a computer plugged in with a network cable, then compare it with the Wi-Fi where you download. If the problem mainly happens upstairs, also look at your Wi-Fi coverage and router placement.

Where should I put an extra wireless Wi-Fi access point?

Place it somewhere it can still get a good connection to your existing network. Ziggo recommends this for wirelessly connected pods. Then test the Wi-Fi where you download your audiobook. A suitable cable offers another way to connect the access point.

Can I use my own router in the Netherlands instead of a model from my provider?

Yes. ACM ConsuWijzer says providers cannot require you to use a particular router brand or model. However, check how the device works with your connection and which settings you need.

How do I keep my router up to date after installation?

Check how firmware updates are installed for your model, and switch on automatic updates if that option is available. VeiligInternetten recommends keeping your router secure with the latest updates.