Who should consider these options?

People with weak Wi-Fi between floors

If you need a connection on another floor, look at where extra Wi-Fi points or cabling could be installed. Walls and ceilings can affect the signal, as the Consumentenbond explains.

People organising screen sharing

If you share the lounge screen, you’ll want authorised users to be able to find it without accidentally making it accessible to everyone. Google Cast Help and Apple Support explain the relevant network and access settings.

People managing a shared network

If you manage the network, you’ll need to decide whether mesh is easy to manage or whether separate access point and guest access settings are a better fit. NETGEAR and Ubiquiti explain wired connections and access point features.

What should you look for when choosing?

Wired mesh points

Choose this if: Ethernet is available between floors and you want to manage a single Wi-Fi setup.

Bear in mind: you’ll need to run cables and connect them correctly to the existing router. TP-Link and NETGEAR explain wired connections between mesh points.

Wireless mesh

Choose this if: running new cables isn’t practical and the connection between the points works well where they’ll be installed.

Bear in mind: walls and ceilings can affect the signal. A quoted coverage range doesn’t show how the system will perform in your building.

Separately managed access points

Choose this if: you have several user groups and someone can manage the network and access settings.

Bear in mind: you’ll need to configure and test screen access appropriately. The Ubiquiti U6+ is an access point, not a standalone internet router, and it uses PoE power.

Extend your FRITZ!Box with a repeater

Choose this if: you already have a FRITZ!Box that you want to keep using.

Bear in mind: the FRITZ!Repeater 3000 AX is an extension, not a replacement internet router. FRITZ! describes both a wireless connection and a LAN connection.

For a shared screen across multiple floors, it’s not just the connection and placement of Wi-Fi points that matter. You’ll also need to consider network access and how practical the installation will be.

What to consider What to look for Who is this important to?
Coverage between floors Check where the router and Wi-Fi points can go, and whether Ethernet backhaul is possible. I want devices to stay connected on the floors where the screen is used; the connection in those locations is the deciding factor for me. Around 33% of consumers prioritise coverage between floors.
Access to the screen Check which protocol the screen uses and test whether users on the intended network can find it. If I share the screen, I want authorised devices to be able to access it without accidentally making it available to everyone. Around 27% of consumers prioritise reliable, controlled screen sharing.
Network management Compare the available guest and isolation settings, and decide who will manage the configuration. With several user groups, I want to control which networks can access the screen. Around 20% of consumers prioritise managing users and Wi-Fi points.
Installation and power Check which Ethernet cables, power sockets and, if needed, PoE power supplies are already available, and what’s included in the box. I want to know in advance what installation work and power my building will need, so I can choose a setup that’s practical. Around 20% of consumers focus on installation effort and additional equipment.

According to Google Cast Help, an isolated guest network can block communication with a Cast device. So test screen sharing from the network that the intended users will actually use; don’t simply turn off security settings.

Pitfalls to avoid

  • Assuming a quoted coverage range guarantees coverage on every floor

    Walls, ceilings and placement all affect the connection. The Consumentenbond also describes differences between mesh systems, so a quoted range won’t necessarily tell you how a setup will perform in your building.

    Check the connection where users need the screen and Wi-Fi, and factor any available cabling into your decision.

    Your chosen setup may require extra Wi-Fi points or cabling. Check the power requirements of the equipment too.

  • Enabling guest isolation and still expecting everyone to be able to cast

    Google Cast Help states that AP or client isolation can prevent communication with a Cast device.

    Decide who can cast and test screen access from the network those users will use, without blindly turning off security.

  • Buying an access point or repeater as a router replacement

    The Ubiquiti U6+ is an access point, while the FRITZ!Repeater 3000 AX extends an existing network setup. Neither is a replacement internet router on its own for this situation.

    Make a note of the equipment you already have and check the function and power requirements of each component before buying.

    Depending on your existing setup, you may need an additional router, power supply or network equipment.

Brands to compare

TP-Link

Deco mesh systems are an option for Wi-Fi in multiple locations. TP-Link offers the Deco X50-PoE in a version with PoE and mounting options.

  • TP-Link explains Ethernet backhaul for Deco points.
  • The connection setup differs between router and access point modes. Check the installation instructions, power requirements and placement for your building.

ASUS

ZenWiFi XD5 is a mesh option for a setup where points can be connected via Ethernet.

  • ASUS describes Ethernet backhaul when Ethernet ports are available in the walls.
  • The connection in a particular building depends on the installation and placement; check it on site.

FRITZ!

The FRITZ!Repeater 3000 AX is designed to extend an existing FRITZ!Box setup.

  • FRITZ! describes both wireless extension and connection via LAN.
  • The repeater isn’t a standalone replacement for an internet router.

Ubiquiti

The UniFi U6+ is an access point for a wired, separately managed network setup.

  • Ubiquiti specifies PoE power, a gigabit uplink and guest and client isolation settings.
  • Access settings need to be configured and tested appropriately to allow authorised users to share the screen.

Joybuy products for Wi-Fi in multiple locations

This selection includes TP-Link Deco mesh systems with multiple units for Wi-Fi in different locations. Check the cabling options for each model and test whether the lounge screen is accessible from the intended networks. Also check the CE marking on the device you receive.

TP-Link Deco E4 mesh Wi-Fi system, 3-pack, Wi-Fi 5

TP-Link Deco E4, 3-pack, Wi-Fi 5

Could be a good fit if you want to place multiple Wi-Fi points; check that the connection is strong enough where you’ll use them.

3-pack; dual-band (2,4 GHz/5 GHz); Wi-Fi 5 (802.11ac).

View at Joybuy
TP-Link AX1800 mesh Wi-Fi system, 2-pack, Wi-Fi 6

TP-Link AX1800 mesh Wi-Fi system, 2-pack, Wi-Fi 6

Could be a good fit if you want to use two mesh units in different locations; test the connection on the floors where you need the screen.

2-pack; Wi-Fi 6.

View at Joybuy
TP-Link Deco X50 mesh Wi-Fi system, 3-pack, Wi-Fi 6

TP-Link Deco X50, 3-pack, Wi-Fi 6

Could be a good fit if you need multiple Wi-Fi points; decide where to place them based on the connection in the locations where you’ll use them.

3-pack; dual-band (2,4 GHz/5 GHz); Wi-Fi 6 (802.11ax).

View at Joybuy
TP-Link Deco XE75 Pro mesh Wi-Fi system, 3-pack, Wi-Fi 6E

TP-Link Deco XE75 Pro, 3-pack, Wi-Fi 6E

Could be a good fit if you want to place multiple mesh units; check the connections you’ll need and test screen access in the locations you have in mind.

3-pack; tri-band (2,4 GHz/5 GHz/6 GHz); Wi-Fi 6E (802.11ax).

View at Joybuy
TP-Link Deco X50-PoE mesh Wi-Fi system, 3-pack, Wi-Fi 6

TP-Link Deco X50-PoE, 3-pack, Wi-Fi 6

Could be a good fit if you want to place multiple Wi-Fi points and can arrange PoE power for this setup.

3-pack; dual-band (2,4 GHz/5 GHz); Wi-Fi 6 (802.11ax); PoE support. Check which PoE power supply is required and whether it’s included with the version you choose.

View at Joybuy

Frequently asked questions

Do I need a new router if the Wi-Fi is weak on another floor?

Not always. Walls and ceilings can weaken the signal, and you can use an extra Wi-Fi point alongside your existing router. First, check the connection on the floors where users need the screen.

Why can’t my phone find the lounge screen even though the Wi-Fi is working?

According to Google Cast Help, AP or client isolation can prevent devices from communicating with each other when using Google Cast. Check which protocol the screen uses and test the relevant network and receiver settings. For standard AirPlay screen mirroring, Apple Support recommends connecting devices to the same Wi-Fi network.

What should I check after installation?

Check that the Wi-Fi points are connected as intended, that screen sharing works from the permitted networks and that the network is properly secured. TP-Link explains how to check in the Deco app whether a satellite is using Ethernet backhaul.

What should I consider besides the purchase when it comes to cables and guarantees?

Check whether the setup requires cables and, if needed, a PoE power supply, and whether you have those items. For a consumer purchase in the Netherlands, the legal guarantee is separate from any commercial guarantee. According to ACM ConsuWijzer, the seller must resolve at no cost any fault that occurs sooner than can reasonably be expected under normal use.

Do I need a licence for standard Wi-Fi in the Netherlands?

According to the Rijksinspectie Digitale Infrastructuur, Wi-Fi in buildings is licence-free if you use the designated frequencies and comply with the conditions of use. Also check that the device you receive has the correct CE marking.