Start by finding out where the Wi-Fi signal drops out. For one study spot, a well-placed extra access point may be enough, while lessons on several floors are more likely to need multiple points. If there’s Ethernet cabling between floors, it’s worth considering a wired connection between the points. A higher Wi-Fi version number alone doesn’t guarantee a better connection in your home.
Who should consider this choice?
Student with a weak signal upstairs
You take lessons on a floor where the Wi-Fi is weak and want to find out whether one extra point, placed where it can still get a good signal, will be enough. The Consumers' Association advises keeping obstacles between wirelessly connected Wi-Fi points to a minimum.
Student moving around the house
You stream lessons on different floors and need coverage in several study spots, not just a high advertised router speed. The Consumers' Association considers factors including speed and ease of use in its tests, and notes that mesh systems vary from one another.
Householder with a network cable between floors
You can connect the points by cable and want to know whether this suits the set-up you’ve chosen. TP-Link describes Ethernet backhaul as a way to connect Deco points over Ethernet.
What should you look for?
One extra wireless Wi-Fi point
A good fit if: just one study spot has poor coverage and you can find an intermediate position with a strong enough signal.
Bear in mind: a point placed somewhere it can barely receive a signal itself won’t reliably solve the problem.
Mesh with multiple points
A good fit if: you take lessons on different floors or move around the house with your device.
Bear in mind: extra points add to the purchase cost and power consumption, and performance varies by model.
Wired connection between points
A good fit if: there’s Ethernet cabling between floors that you can use to connect the Wi-Fi points.
Bear in mind: you’ll need suitable cabling and connection options; features can vary by operating mode.
A new standalone router
A good fit if: you want to replace your existing router, or a strategically placed router can already reach your study spots.
Bear in mind: a new router in the same unsuitable spot won’t guarantee better coverage on other floors.
| What to consider |
What should you check? |
Who is this most important for? |
| Coverage at your study spot |
Where does the signal drop out, where can you place a point, and how many points are included in the set? |
If I take lessons upstairs and the Wi-Fi is weak there, I want to know whether a point in a suitable intermediate position will be enough. Around 40% of consumers prioritise coverage at their study spot. |
| Stability while streaming |
Is Ethernet backhaul possible, and can you connect lesson devices by cable? |
When I’m streaming a lesson, I want the connection to stay stable. Around 30% of consumers give stability their top priority. |
| Connection to your provider’s router |
Does the system support your preferred connection method, and will the features you need remain available? |
If I want to keep my provider’s router, I want to know in advance how the extra system connects to it. Around 20% of consumers prioritise this connection. |
| Total cost and performance you need |
Compare the number of points you need, power consumption and the performance of the specific model. |
If my study spots have enough coverage, I don’t want to pay for more points or a higher Wi-Fi version than I need. Around 10% of consumers prioritise total cost. |
Common buying mistakes
-
Putting a Wi-Fi point upstairs where it can’t get a signal
A wireless point needs to be able to make a usable connection to the network. If you place it somewhere the signal is barely reaching, the problem may remain.
First, try an intermediate position where the signal is still strong. If the connection between floors remains weak, check whether Ethernet backhaul is an option.
You may still need an extra point or an Ethernet cable.
-
Treating Wi-Fi 7 or advertised coverage as a guarantee
The Wi-Fi version alone doesn’t tell you how well a device will perform in your home, and mesh models also differ from one another.
First, map out your study spots and possible locations, then compare the performance of the specific model.
-
Assuming access point mode keeps all features
According to TP-Link, some Deco features, including parental controls and port forwarding, aren’t available in access point mode.
Before buying, check which features are available in the operating mode you want to use.
Brands to compare
TP-Link
The Deco range includes mesh sets for anyone looking to use Wi-Fi points in several locations.
- TP-Link says the Deco X50 has Wi-Fi 6 and three gigabit ports per unit.
- The Deco X50-PoE is a different model from the Deco X50. Check the exact variant, and don’t assume that advertised coverage will predict performance across multiple floors in your home.
FRITZ!
The FRITZ!Mesh Set 4200 includes three FRITZ!Repeaters 3000 AX for a larger home network.
- FRITZ! lists Wi-Fi 6 and compatibility with a FRITZ!Box or a suitable fibre-optic modem/ONT connected directly.
- The right connection method depends on the provider equipment you already use, so check this before choosing a set.
ASUS
ZenWiFi BD4 is a dual-band mesh system with Wi-Fi 7 and an option for wired backhaul.
- ASUS lists Ethernet backhaul and two 2.5GbE ports for the BD4.
- Wi-Fi 7 isn’t automatically necessary for streaming a language lesson. Also check how many units are included in the package and which regional version it is.
NETGEAR
The Orbi 770 RBE773 is a tri-band mesh set with a router and two Wi-Fi points.
- The Consumers' Association lists Wi-Fi 7 and three mesh points for this version.
- NETGEAR’s advertised coverage and speed claims don’t predict how the system will perform in your home.
Joybuy products for Wi-Fi across multiple floors
These Joybuy products are mesh systems for Wi-Fi in several areas of your home. They vary in the number of points, Wi-Fi specification and wired connection options.
No image available
TP-Link Deco BE68 (2-pack)
Worth comparing if you’re considering two mesh points with wired or wireless backhaul.
Tri-band Wi-Fi 7; two points; supports wired and wireless backhaul.
View at Joybuy
No image available
TP-Link Deco PX10 Dual-band Wi-Fi 6
Worth comparing if you want to combine mesh Wi-Fi with Powerline using your existing electrical wiring.
Wi-Fi 6; Powerline; three gigabit Ethernet ports per unit.
View at Joybuy
No image available
TP-Link Deco X50 (3-pack) Dual-band Wi-Fi 6
A three-point mesh set to compare if you want Wi-Fi in several areas of your home.
Wi-Fi 6; three units; three gigabit ports per unit.
View at Joybuy
No image available
TP-Link Deco XE75 Pro (3-pack) Tri-band Wi-Fi 6E
Worth comparing if you’re looking for a three-point mesh set with tri-band Wi-Fi 6E for several areas of your home.
Tri-band Wi-Fi 6E; three units; three Ethernet ports per unit.
View at Joybuy
No image available
TP-Link Deco X50-PoE (3-pack) Dual-band Wi-Fi 6
Worth comparing if you’re considering three mesh points powered over Ethernet.
Wi-Fi 6; three units; PoE support; two Ethernet ports per unit.
View at Joybuy
Frequently asked questions
Do I need to replace my provider’s router to use mesh?
Not necessarily: a mesh system with access point mode can extend your existing network. According to TP-Link, some Deco features, including parental controls and port forwarding, aren’t available in this mode. Check which features your chosen model supports.
Where should I put an extra Wi-Fi point?
Don’t put a wirelessly connected point somewhere it can barely get a signal itself. The Consumers' Association advises keeping obstacles between points to a minimum, so try an intermediate position where the signal is still strong.
What running costs and ongoing maintenance should I consider?
Compare the combined power consumption of all the points and keep the firmware up to date. The Consumers' Association includes energy use in its tests, while ACM ConsuWijzer highlights the importance of updates for your own network equipment.
Can I connect my own router in the Netherlands?
ACM ConsuWijzer explains the freedom to use your own router, but a provider can refuse an unsafe device. Also check that the connection method and settings are compatible with your provider’s network. Radio equipment placed on the market in the Netherlands must meet the applicable European requirements and carry the correct CE marking, as explained by the Dutch Authority for Digital Infrastructure.