Video caller in the loft
You have meetings on a floor where walls or floors can weaken the Wi-Fi signal from downstairs. TP-Link Netherlands describes a wired connection between Deco units as an option when floors or walls limit the signal.
A new router downstairs won’t automatically solve weak Wi-Fi coverage on an upper floor. For a single, fixed workspace, running an Ethernet cable directly to it could help; for Wi-Fi across several floors, an extra access point or mesh system is a better fit. A cable between the access points means the connection doesn’t rely on Wi-Fi passing through the floor; without a cable, placement and the wireless connection between them are important.
You have meetings on a floor where walls or floors can weaken the Wi-Fi signal from downstairs. TP-Link Netherlands describes a wired connection between Deco units as an option when floors or walls limit the signal.
You mainly want a reliable connection in one place during calls and may be able to use an Ethernet cable. Ziggo suggests running a cable upstairs with a switch as a possible solution.
You need Wi-Fi on several floors, but need to consider the wireless connection between the mesh points. ASUS and NETGEAR describe wireless connections between the units; placement and building materials still matter.
Best suited when: you mainly need a connection for one fixed meeting spot and can run an Ethernet cable to it.
Consider: a cable to that spot won’t automatically extend Wi-Fi coverage for mobile devices on other floors.
Best suited when: you want Wi-Fi on several floors and can run an Ethernet cable between the units. TP-Link Netherlands describes this option for Deco systems.
Consider: check the connection and whether the system you choose can work with your existing router; some Deco features aren’t available in access point mode.
Best suited when: you want to reach several floors and don’t have a cable between the units.
Consider: the mesh points need a usable wireless connection of their own; floors and other building materials can affect this connection.
Best suited when: you already use a FRITZ!Box and want to extend your existing network. FRITZ! describes connecting via LAN or wirelessly.
Consider: the FRITZ!Repeater 3000 AX is an extension, not a complete router and mesh kit; check that it’s compatible with your equipment.
First, consider whether the main issue is one workspace or Wi-Fi across several floors. Then decide whether you can run a cable between the network points.
| What to consider | What should you look for? | Who is this important for? |
|---|---|---|
| Coverage on the floor where you have meetings | Check how many units are included, where they can be placed and whether you can use Ethernet backhaul if you have a cable. | If I have meetings in the loft or on another floor, I want coverage there rather than relying solely on the coverage area printed on the box. Around 36% of consumers say coverage on other floors is their main concern when buying. |
| Connection during calls | Assess both the connection from your computer to the access point and the connection between the units; Ethernet can be an alternative for a fixed workspace. | If I need meetings to run smoothly, I look at the connection in my workspace, not just the Wi-Fi speed on paper. Around 29% of consumers say reliability during calls is their main concern when buying. |
| Compatibility with your existing router | Check whether the system can work in access point mode and which features remain available in that mode. If you’re connecting directly to your internet provider’s network, check which settings you need. | If I want to keep my current router, I want to know in advance how the new points will connect to it. Around 21% of consumers give compatibility with their existing network setup top priority. |
| Expansion and support | Check how many units are included, whether you can add more, and the warranty and support for the exact model. | If I want coverage across several floors, I consider whether the kit is complete for my home and what it would take to expand it. Around 14% of consumers put expansion costs and support at the top of their list. |
A floor can still weaken the signal to your meeting spot, even with a different router.
First, work out where the connection is falling short. Then decide where to place an access point and how to connect it to the network.
The mesh point also needs a usable connection to the network. A dedicated wireless backhaul band won’t remove obstacles between the units.
Test the connection between the units and, if possible, consider using an Ethernet cable if floors are causing problems.
Extending an existing network is different from buying a kit with a router and several mesh points.
Before buying, check the exact model, how many components are included and whether your current router will remain part of the setup.
The Deco X50 is a Wi-Fi 6 mesh system; TP-Link Netherlands lists Ethernet backhaul as an option for this model.
According to ASUS, the ZenWiFi AX (XT8) is a Wi-Fi 6 mesh kit comprising two routers.
According to NETGEAR, the Orbi RBK763S consists of a router and two satellites.
The FRITZ!Repeater 3000 AX is worth considering to extend an existing network, not as a complete replacement for a router kit.
These mesh products are designed for Wi-Fi across multiple floors, with options for wireless connections between the units or Ethernet backhaul where this is specifically mentioned.
No image available
This kit of three Deco E4 units is a mesh option for Wi-Fi across multiple floors.
Dual-band Wi-Fi 5 (2,4 GHz and 5 GHz); two Ethernet ports per unit, with a maximum speed of 100 Mbps.
No image available
This kit of two mesh units is an option for a wireless mesh network across multiple floors.
Tri-band on 2,4, 5 and 6 GHz; Wi-Fi 7 (802.11be) and AiMesh integration.
No image available
A mesh option for anyone who wants to connect network points using a wired connection.
Dual-band Wi-Fi 7 (802.11be); wired backhaul listed as an option.
No image available
This kit of three mesh points is an option for Wi-Fi across multiple floors; Ethernet backhaul is listed as a possibility.
Wi-Fi 6 (802.11ax); three gigabit ports per unit.
No image available
A mesh option for Wi-Fi in multiple areas; the product description says you can expand it with extra Velop Pro 7 nodes or compatible Linksys mesh devices.
Tri-band Wi-Fi 7 (802.11be).
No, not necessarily: you can keep your existing router and add an extra access point or use a system in access point mode. If you want to connect your own device directly to your provider’s network, you’ll need the right settings; ACM ConsuWijzer explains the requirements for connecting and using your own router.
Choose a spot where the access point still has a usable connection to the network and can reach your meeting space. Concrete and other materials can weaken the signal; running an Ethernet cable upstairs is an alternative if the wireless connection between the units isn’t good enough.
According to TP-Link, Ethernet backhaul remains available, while the main router manages the connected devices. Some advanced Deco features aren’t available in this mode; check the instructions for your model and firmware.
Check how many access points are included in the box and whether you’ll need a cable or an extra unit. Also check the warranty and support for the exact model; the terms listed by FRITZ! for the FRITZ!Repeater 3000 AX don’t automatically apply to other models.
The Netherlands Authority for Digital Infrastructure states that radio equipment sold in Europe must meet the applicable requirements and carry a CE marking. Check the marking on the specific device; a product listing alone doesn’t confirm that every individual item complies.