Who is this choice relevant to?

Families with weak Wi-Fi upstairs

You want to watch or share videos across different floors, but some rooms are difficult to reach. Your choice will depend on where the router and Wi-Fi points can go, any obstacles, and how many points you need.

Families with a network cable between floors

You can connect an additional Wi-Fi point by cable and want to know whether your chosen equipment supports Ethernet backhaul. Check which ports the specific version has, too.

Families with an existing provider-supplied modem

You may want to keep your modem and improve coverage with a suitable access point or mesh system. First, check where you can place the equipment and, if in doubt, ask your provider what’s possible.

What should you look for when choosing?

First, see whether you can move your existing router to a better position. Then check whether you can run a network cable between floors. If that’s not practical, compare wireless mesh systems by the number of points and where you can place them.

What to consider What to look for when buying Who is this important for?
Coverage across multiple floors Identify the rooms with problems and check how many points the set includes and where they can be placed. If I watch videos in rooms on different floors, I want to know whether the points can be placed there and still get a good connection. Around 36% of consumers prioritise coverage between floors.
Connection for video streaming Check whether the model supports Ethernet backhaul and whether there’s a suitable cable route. Otherwise, consider where to place wireless points. I want the connection between the points to reach where I watch, not just to have Wi-Fi there. Around 29% of consumers give the reliability of that connection top priority.
Connecting to your existing modem Check where your modem is, what your provider allows, and whether your chosen equipment can work as a router or access point. If I want to keep my provider-supplied modem, I’m looking for a solution that works with my existing home network. Around 21% of consumers prioritise compatibility with their existing connection.
Security and use Check the available security settings, firmware support and the system’s energy consumption. I want to keep my home network secure when sharing personal videos, and I know additional points will stay switched on. Around 14% of consumers give security or running costs top priority.

Common buying mistakes

  • Choosing based only on quoted coverage or Wi-Fi generation

    Walls, floors, placement and the connection between points vary from home to home. The Wi-Fi generation alone therefore doesn’t tell you how good the signal will be where you watch.

    Check the connection on the floors where you watch videos and consider where the points can be placed.

  • Assuming products with ‘X50’ in the name are the same model

    According to TP-Link, the standard Deco X50 and Deco X50-PoE differ in their ports and power options, among other things.

    Check the full model name, the number of points and the connections on the version you’re considering.

  • Assuming you’ll always need more Wi-Fi points

    The number of points you need depends on your home’s layout and the connection between the points. The Consumentenbond suggests two points for two floors and three for three floors as a guide, not a guaranteed result.

    Test the rooms with connection problems first, then decide whether you need extra points or a cable route.

    Installing cabling and keeping extra points switched on all the time can add practical costs and effort.

Brands worth comparing

TP-Link

The Deco X50 range includes mesh systems with multiple points; the X50-PoE is a separate variant. Both may be worth considering if you need coverage across floors or a wired connection between points.

  • According to TP-Link, the standard Deco X50 has three gigabit ports per point and optional Ethernet backhaul. The X50-PoE has two 2.5Gbps ports per point and can be powered via PoE or an adapter, according to the manufacturer.
  • Check the variant and the connections on each point: quoted coverage and data speeds don’t guarantee the same results in every home.

FRITZ!

The FRITZ!Repeater 3000 AX extends an existing network and may be a good option if you want to keep your FRITZ!Box or need an extra Wi-Fi point with a wired connection.

  • According to FRITZ!, this model has two gigabit LAN ports and can connect to a FRITZ!Box via LAN. The manufacturer also describes using it as an access point with a router from another brand.
  • If you use it with a router from another brand, don’t assume you’ll get the same FRITZ! mesh features.

ASUS

ZenWiFi XD5 is a mesh range worth comparing if you’re looking for a complete set with multiple points.

  • ASUS provides documentation for XD5 sets with three points.
  • Before choosing, check the full model and its documentation for ports and backhaul.

NETGEAR

The Orbi 770 RBE773 is a tri-band Wi-Fi 7 set with a router and two satellites. It could be a useful comparison if you have more demanding technical requirements.

  • NETGEAR describes a dedicated backhaul for this range. The Consumentenbond refers to the RBE773-100EUS version.
  • NETGEAR’s product information is aimed at the US market. According to the Consumentenbond, Wi-Fi 7 isn’t automatically the right choice for typical use.

Joybuy products for multiple floors

These Joybuy products are mesh sets with two or three points to compare for Wi-Fi across multiple floors. Check that the number of points, connection options and placement suit your home.

ASUS ZenWiFi BT8 2-pack tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack)

This two-point mesh set is worth comparing if you want to extend Wi-Fi across multiple floors.

Tri-band, with 2.4GHz, 5GHz and 6GHz bands; Wi-Fi 7 (802.11be). The description mentions AiMesh integration with compatible ASUS routers.

Joybuy
TP-Link AX1800 mesh Wi-Fi system with two points

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 (2-pack)

This two-point set is designed to extend an existing home network with mesh Wi-Fi.

The description mentions Wi-Fi 6 and optional Ethernet backhaul. The installation instructions say to connect one Deco to the modem and place the other points around the home.

Joybuy
TP-Link Deco X50 mesh Wi-Fi system with three points

TP-Link Deco X50 (3-pack)

This three-point set is worth comparing if you want to extend Wi-Fi across multiple floors.

Wi-Fi 6 and dual-band (2.4GHz and 5GHz). According to the product description, each point has three gigabit ports; TP-Link describes optional Ethernet backhaul for the standard Deco X50.

Joybuy
TP-Link Deco XE75 Pro mesh Wi-Fi system with three points

TP-Link Deco XE75 Pro (3-pack)

This three-point set is worth comparing if you want to connect multiple rooms or floors with mesh Wi-Fi.

Tri-band Wi-Fi 6E, with 2.4GHz, 5GHz and 6GHz bands. The product description mentions three Ethernet ports per unit.

Joybuy
TP-Link Deco X50-PoE mesh Wi-Fi system with three points

TP-Link Deco X50-PoE (3-pack)

This three-point mesh set is worth comparing if you want to connect multiple floors and are considering PoE power.

Dual-band Wi-Fi 6 (2.4GHz and 5GHz). The product title lists two Ethernet ports; the description mentions PoE support.

Joybuy

Frequently asked questions

Do I need to replace my provider-supplied modem?

No, that’s not always necessary. First, try moving it to a better position and see whether an additional access point or Wi-Fi point will work with your existing connection. If you want to move the modem, ask your provider what’s possible.

Where should I put an additional wireless Wi-Fi point?

Don’t place the point where the incoming signal is already too weak. The Consumentenbond recommends keeping obstacles between points to a minimum. Then test the coverage on the floor where you watch videos.

How do energy use, maintenance and the warranty affect my choice?

Compare the energy consumption of the complete set and keep its firmware up to date, as additional Wi-Fi points usually stay switched on. In the Netherlands, statutory warranty applies alongside any manufacturer’s warranty: according to ACM ConsuWijzer, the seller is responsible for offering a suitable solution if a product, when used normally, doesn’t do what you could reasonably expect.

What rules apply to a Wi-Fi router sold in the Netherlands?

Radio equipment placed on the EU market must comply with the applicable Radio Equipment Directive. If it conforms, the manufacturer affixes the CE marking, according to the Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur). The applicable RED 3.3 cybersecurity requirements have also applied since 1 August 2025. The requirements that apply to a specific device depend in part on its function; these general rules don’t confirm that an individual product listing is compliant.