You don’t automatically need a new router to download files across multiple floors. First, test your internet connection using an Ethernet cable and compare it with Wi-Fi in your study area. If you have an Ethernet cable between floors, a wired access point or mesh system with Ethernet backhaul could be a good fit. Without a cable, wireless mesh can work if the nodes still have a strong enough connection where you place them. Then compare how many nodes you need and how the solution will work with your existing modem.
Who is this relevant to?
Student whose Wi-Fi drops out upstairs
You download study materials on different floors and want to find out whether the floor, router location or internet connection is the limiting factor. The Dutch Consumers’ Association recommends testing your connection and taking obstacles between Wi-Fi nodes into account.
Student with an Ethernet cable between floors
You can run an Ethernet cable to your study area and want to connect a Wi-Fi access point there, without relying on wireless coverage between floors. ASUS documents Ethernet backhaul for AiMesh and ZenWiFi installations.
Student who can’t run a cable
You need coverage on more than one floor and want to weigh up whether wireless mesh nodes can connect to each other reliably enough, or whether a powerline solution is worth trying. The Dutch Consumers’ Association recommends considering obstacles and the connection between wireless nodes.
What should you look for when choosing?
Move or adjust your router
Choose this if: the connection is good by the router and moving it or changing its settings would provide enough coverage.
Bear in mind: moving it may not help enough if floors or walls significantly weaken the signal.
Wired access point or mesh
Choose this if: there is an Ethernet cable to your study area, or you can run one, and the Wi-Fi signal there is too weak.
Bear in mind: you’ll need to install a cable and set up the router, access point or bridge correctly.
Wireless mesh
Choose this if: running a cable isn’t practical and you can place the nodes where they still get a strong enough signal from each other.
Bear in mind: an extra node placed somewhere with barely any reception may also have a weak connection.
Powerline with a Wi-Fi access point
Choose this if: you can’t run an Ethernet cable and a wireless connection between floors isn’t strong enough.
Bear in mind: performance depends on your home’s electrical wiring; advertised speeds don’t tell you how fast your downloads will be.
The Dutch Consumers’ Association recommends testing your connection with an Ethernet cable and comparing it with Wi-Fi where you study. This can help you work out whether your internet connection or your home Wi-Fi needs attention.
| Consideration |
What to look for when buying |
Who is this important for? |
| Coverage on every floor |
Compare the connection by the router with Wi-Fi in your study area; check where you can actually place the nodes. |
If I study on several floors, I want to be able to download course materials wherever I am. Around 36% of consumers prioritise reliable coverage in every study area. |
| Connection between the nodes |
Check whether an Ethernet cable is available and whether the system supports Ethernet backhaul; for wireless placement, assess the reception at the chosen location. |
If I can’t run a cable, I want to know whether the nodes can connect to each other wirelessly. Around 29% of consumers prioritise the connection between the router and additional Wi-Fi nodes. |
| Compatibility with your existing modem |
Check the access point or bridge mode, the available ports and the installation instructions for the exact model. |
If I want to keep my current modem, I want to know in advance how the extra Wi-Fi node connects to it. Around 21% of consumers prioritise easy installation with their existing modem. |
| Total cost |
Compare how many nodes you need and factor in any cables or extra equipment; test your connection before considering a faster broadband plan. |
If I only need Wi-Fi in a few study areas, I don’t want to pay for unnecessary nodes or cables. Around 14% of consumers prioritise the total cost. |
Common buying mistakes
-
Assuming a higher Wi-Fi speed means faster downloads upstairs
Your internet connection, distance and obstacles can each be the limiting factor. So a higher advertised Wi-Fi speed doesn’t, by itself, tell you how well downloads will work in the attic.
First test with an Ethernet cable, then try Wi-Fi on the floors where you study. Only then decide whether you need extra equipment.
-
Placing a mesh node somewhere with no usable reception
The extra node also needs to receive a strong enough signal from the network to pass the connection on.
Place nodes where they can still communicate reliably with each other, and look into Ethernet backhaul if that isn’t possible.
-
Treating the Deco X50 and Deco X50-PoE as the same model
TP-Link lists different ports and PoE support for these models. The exact model name matters, as it determines the connections and power supply.
Before buying, check the full model name, hardware version, ports and what’s included in the pack.
Brands to compare
TP-Link
The Deco X50 is a Wi-Fi 6 mesh range available in packs of one, two or three nodes. The Deco X50-PoE is a separate model.
- According to TP-Link, the Deco X50 supports Ethernet backhaul and each node has three Gigabit ports.
- According to TP-Link Netherlands, the X50-PoE V2 has two 2.5Gbps ports and PoE. Don’t treat the models as identical, and remember that the advertised coverage isn’t a measurement of your home.
ASUS
The ZenWiFi XD5 is a Wi-Fi 6 mesh system. You can check whether router or access point mode is right for your installation.
- ASUS describes a three-node pack and documents Ethernet backhaul for AiMesh and ZenWiFi.
- According to ASUS, you’ll need a compatible device to benefit from Wi-Fi 6. Also check the exact model and any regional restrictions on 160 MHz at 5 GHz.
FRITZ!
The FRITZ!Repeater 3000 AX is an add-on for an existing network, not a standalone multi-node pack.
- FRITZ! lists two Gigabit LAN ports and a LAN bridge option for connecting to a router using an Ethernet cable.
- For FRITZ! mesh functionality, the manufacturer specifies FRITZ!OS 6.90 or later. Don’t assume you’ll get the same mesh features when using a router from another brand.
devolo
Magic 2 WiFi 6 next combines a connection over your home’s electrical wiring with Wi-Fi nodes, and is available as a starter or multi-room pack.
- According to devolo, the starter kit contains one LAN adapter and one Wi-Fi adapter; the multi-room kit contains one LAN adapter and two Wi-Fi adapters.
- The speed quoted by devolo doesn’t tell you how well your home’s electrical wiring will perform.
Mesh products on Joybuy
These products are mesh systems for getting Wi-Fi in different areas of your home. If you’re placing the nodes wirelessly, check that they’ll have a strong enough connection in their intended locations. The Dutch Authority for Digital Infrastructure requires radio equipment to carry the correct CE marking; check this for the exact model before buying.
No image available
TP-Link Deco BE68 (2-pack)
A two-unit mesh system for getting Wi-Fi in different areas of your home.
Tri-band Wi-Fi 7; supports wired and wireless backhaul. If you’re placing the nodes wirelessly, they’ll need to be within range of each other in their chosen locations.
Joybuy
No image available
TP-Link Deco E4 (3-pack)
A three-unit mesh system for getting Wi-Fi in different areas of your home.
Dual-band Wi-Fi 5 (2.4 GHz/5 GHz); two Ethernet ports per unit. If you’re placing the nodes wirelessly, they’ll need to be within range of each other in their chosen locations.
Joybuy
No image available
TP-Link Deco X50 (3-pack)
A three-unit mesh system for getting Wi-Fi in different areas; Ethernet backhaul is an option if you can connect the nodes with cables.
Dual-band Wi-Fi 6; three Ethernet ports per unit. TP-Link Netherlands lists Ethernet backhaul for the Deco X50. If you’re placing the nodes wirelessly, they’ll need to be within range of each other in their chosen locations.
Joybuy
No image available
ASUS ZenWiFi BT10 (2-pack)
A two-unit mesh system for connecting different areas of your home.
Tri-band Wi-Fi 7; the product description says you can expand the system with compatible AiMesh nodes. If you’re placing the nodes wirelessly, they’ll need to be within range of each other in their chosen locations.
Joybuy
No image available
TP-Link Deco XE75 Pro (3-pack)
A three-unit mesh system for getting Wi-Fi in different areas of your home.
Tri-band Wi-Fi 6E with 2.4, 5 and 6 GHz bands. If you’re placing the nodes wirelessly, they’ll need to be within range of each other in their chosen locations.
Joybuy
Frequently asked questions
Do I need to buy a new router straight away if downloads are slow upstairs?
No. First test the connection with an Ethernet cable and compare it with Wi-Fi in your study area. You could also try moving the router. This can help you work out whether the issue might be with your internet connection or your home Wi-Fi coverage.
Where should I put a wireless mesh node?
Don’t automatically put it somewhere with no reception at all: the node needs a usable connection of its own. The Dutch Consumers’ Association recommends keeping obstacles between nodes to a minimum; a placement light or app can help you find a suitable location.
What warranty applies to a Wi-Fi product in the Netherlands?
For a consumer purchase, you’re entitled to a product that works properly under the statutory guarantee, according to the Dutch Government. Any manufacturer’s or seller’s warranty is separate.
Do I need a licence for home Wi-Fi in the Netherlands, and what should I check on the device?
According to the Dutch Authority for Digital Infrastructure, no licence is needed for home Wi-Fi as long as you follow the rules for the designated frequencies and their use. Radio equipment must carry the correct CE marking; check this for the specific model and follow the instructions for use.