Who is this buying guide for?

Viewers on multiple floors

You want to watch the same recording on different floors and need coverage in more than one place. Consumentenbond lists multiple Wi-Fi points as an option for coverage across several floors.

Viewers who can run a cable

You may be able to run an Ethernet cable to your viewing spot and want to rely less on a wireless signal travelling through floors. The Rijksinspectie Digitale Infrastructuur and FRITZ! describe wired connection options for network equipment.

Viewers with one weak spot

Your Wi-Fi works elsewhere, but keeps dropping out where you want to watch the recording. In that case, the repeater’s position and compatibility with your router both matter; Consumentenbond recommends taking care when positioning Wi-Fi points.

What should you look for when buying?

One wireless repeater

Suitable when: Wi-Fi is poor in one viewing spot and there’s an intermediate position with a usable signal.

Bear in mind: the repeater itself needs to maintain a wireless connection to the router; compatibility with a mesh system isn’t guaranteed.

Several mesh points

Suitable when: you need Wi-Fi on several floors or in different rooms.

Bear in mind: you’ll need to position several points; the number required and the connection depend on your home.

An Ethernet cable

Suitable when: you can run a cable to an access point or directly to your playback equipment.

Bear in mind: running the cable and connecting the device correctly involve extra work; check that the model supports the wired mode you need.

What to consider What should you look for? Who is this important for?
Coverage across floors Decide where you’ll be watching and whether an intermediate point will still receive a good signal. If you want to watch the recording on different floors, you’ll need coverage in more than one place. Around 36% of consumers prioritise coverage across multiple floors.
Connection to your viewing spot Check whether you can run a cable and whether the device supports the access point or wired mode you need. If you want the connection to your viewing spot to rely less on Wi-Fi travelling through floors, a cable is an important option. Around 29% of consumers prioritise a reliable wired connection.
Router compatibility Make a note of your router model and check which mesh technology and firmware it supports. If you want to keep your current router and use specific mesh features, check that the two devices work together. Around 21% of consumers prioritise compatibility with their router.
Buying and using the equipment Check how many points you’ll need, how to install them, and which updates and warranty terms apply. If your main priority is limiting the number of devices and keeping management simple, an easy set-up matters. Around 14% of consumers prioritise ease of purchase and use.

Common buying mistakes

  • Putting a repeater where reception is already poor

    A wireless repeater relies on the signal at its own location to connect to the router. If reception is weak there, the connection to your viewing spot may still be disappointing.

    First find an intermediate position with a usable signal, then check reception at your viewing spot.

  • Assuming every mesh system works with every router

    OneMesh, AiMesh and the mesh features described by D-Link all require compatible equipment. An extender may work as a standard repeater without supporting all the features of the mesh system mentioned.

    Check the exact router model, the mesh technology it supports and the required firmware.

  • Assuming the stated Wi-Fi speed is the speed you’ll get in the loft

    The connection at your viewing spot also depends on distance, obstacles and interference. The speed quoted for a product doesn’t, by itself, tell you what speed you’ll get there.

    Assess the connection where you plan to watch, rather than relying only on a speed rating.

Brands to compare

TP-Link

TP-Link offers both standalone Wi-Fi extenders and expandable Deco mesh systems. Check which version is included in the package.

  • TP-Link lists a signal indicator, gigabit port and access point mode for the RE605X.
  • OneMesh requires a compatible OneMesh router. The Dutch product information for the Deco X50-PoE describes version V2; check which version is included in the package you choose.

FRITZ!

The FRITZ!Repeater 1200 AX is worth considering if you want to extend an existing FRITZ! network; the manufacturer also says it can be used with other routers.

  • FRITZ! lists a gigabit LAN port and the option to connect the repeater to a FRITZ!Box via LAN.
  • Don’t assume the FRITZ! mesh integration described will work with a router from another brand without checking first.

NETGEAR

The EAX15 is a Wi-Fi 6 extender for extending an existing router’s coverage.

  • NETGEAR lists a gigabit port and a shared Wi-Fi name.
  • The stated speed of up to 1.8 Gbit/s is a product specification, not a measurement of the connection between floors in your home.

ASUS

According to ASUS, the RP-AX58 can work with compatible AiMesh equipment and also has an operating mode for other routers.

  • ASUS lists an access point mode and compatibility with a wide range of other Wi-Fi routers.
  • AiMesh features require compatible equipment; claims about speed and coverage aren’t independent measurements for your viewing spot.

D-Link

The E15 extends existing Wi-Fi; D-Link describes additional mesh features when used with compatible D-Link products.

  • D-Link says the E15 can be used as an extender with existing routers.
  • The mesh and AI features described require compatible D-Link equipment; coverage in your home depends on its layout and where the device is placed.

Joybuy products

This selection includes mesh systems with multiple points to extend coverage to different viewing spots. The Rijksinspectie Digitale Infrastructuur says that CE marking is mandatory. Check the mark on the actual device, as a product listing doesn’t confirm that the item supplied complies.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 (2-pack)

A set with two mesh points may suit you if you want to extend Wi-Fi to more than one viewing spot. Check that you can position them appropriately in your home and that they work with your router.

View at Joybuy
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

This set with three mesh points is designed to provide coverage in several places. Check where you can position the points in your home.

View at Joybuy
TP-Link Deco X50-PoE (2-pack), dual-band Wi-Fi 6

TP-Link Deco X50-PoE (2-pack), dual-band Wi-Fi 6

A mesh set with two points may suit you if you need coverage in more than one place. Check that a wired PoE set-up works for your needs.

View at Joybuy
TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

This set with three mesh points is an option if you want to extend coverage to several viewing spots. Check the connection where you plan to watch.

View at Joybuy
TP-Link Deco X50-PoE (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50-PoE (3-pack), dual-band Wi-Fi 6

A set with three mesh points may suit you if you have several viewing spots. Check whether a wired PoE set-up is practical in your home.

View at Joybuy

Frequently asked questions

How many Wi-Fi points do I need for multiple floors?

Consumentenbond’s buying guide suggests two points for a two-storey home and three for a three-storey home. Use this as a starting point: decide where you’ll be watching, then check the connection on each floor.

Where should I put a wireless repeater?

Don’t put it somewhere the router’s signal is already weak. Consumentenbond recommends keeping obstacles to a minimum and, ideally, having no more than two rooms between Wi-Fi points. A signal indicator or app can help you position it.

Does an Ethernet port on a repeater make the whole connection wired?

No. If the repeater is connected wirelessly, its Ethernet port can provide a wired connection to a playback device, while the connection back to the router remains wireless. If you want to use a cable for that part too, check specifically for an access point or wired connection mode.

What can I do if my Wi-Fi device develops a fault?

If a product is faulty, the seller is responsible for the Dutch statutory guarantee. According to ACM ConsuWijzer, depending on the circumstances, the seller must repair or replace the product free of charge, or refund the purchase price. A manufacturer’s warranty doesn’t replace this right.

Do I need a licence for ordinary Wi-Fi in the Netherlands?

The Rijksinspectie Digitale Infrastructuur says Wi-Fi can be used without a licence, notification or registration, provided the relevant conditions are met. Check the CE marking on the device and follow the installation instructions. The rules for mobile repeaters aren’t the same as those for Wi-Fi equipment.