Which clubs might need to make this choice?

A club with a weak Wi-Fi signal between floors

Wants to access the archive in areas where the current router doesn’t provide enough coverage, and needs to decide how to connect Wi-Fi points across floors. TP-Link and ASUS describe both wired connection options and mesh solutions.

A club with visitor Wi-Fi and archive access

Needs to decide who requires access to the archive and whether guest access should be kept separate from the archive network. If the club processes personal data, the Dutch Data Protection Authority requires appropriate security. Ubiquiti describes assigning VLANs to Wi-Fi networks as one possible way to configure network access.

A club with existing network infrastructure

Wants to keep its existing modem, cabling or compatible mesh network and find an extension that works with it. TP-Link describes a Deco access point mode, while FRITZ! describes extending a compatible FRITZ! mesh network.

What should you look for when buying?

Wired access points

Choose this option: if network cables are already in place and the club wants to set up and manage separate Wi-Fi points.

Keep in mind: you’ll need cabling, suitable power and the right configuration for your router, switches and any network segments.

Mesh with Ethernet backhaul

Choose this option: if cables are available between floors and you want to manage multiple Wi-Fi points together.

Keep in mind: you’ll need the right router or access point mode and port connections. Cabling between mesh points doesn’t automatically guarantee coverage in every working area.

Wireless mesh or extension

Choose this option: if there are no cables and you can position the mesh points so they have a good connection with one another, or if you want to extend a compatible existing FRITZ! network.

Keep in mind: the building layout may weaken the wireless connection between points; a repeater doesn’t replace the main router.

Your priorities depend on the cabling available, the level of archive access you need and your existing network. Check the setup in the areas where members will actually use the archive.

Consideration What to look for when buying Who should prioritise this?
Coverage between floors Map the archive locations and possible positions for Wi-Fi points; test the connection in the areas where you need it. I want to be able to open the archive on the floors where the club uses it, and know how the Wi-Fi points connect to one another. Around 36% of consumers give coverage between floors their highest priority.
Archive access and guest Wi-Fi Establish who needs access and whether the router, access points and any switches support the separation you want. If visitors also use the Wi-Fi, I want to decide which club members and administrators can access the archive. Around 29% of consumers make access security their top priority.
Existing modem and cabling Check the router functions, available LAN ports, cable routes and any mesh compatibility. If we want to keep our current modem or existing cables, I want to know which extension will work with them. Around 21% of consumers give keeping existing infrastructure their highest priority.
Concurrent use and management List the users and devices, and check how the archive server is connected; test access after installation. When several members are using the network, I want to know how the access points and connection to the archive server are managed. Around 14% of consumers give concurrent use and management their highest priority.

Buying pitfalls

  • Assuming a stated total Wi-Fi coverage figure proves the signal will reach through floors

    Product information describes the equipment and possible setups, not reception in your club building. The connection can vary from floor to floor and from one location to another.

    First decide how the points will connect to one another, then check access in the areas where people work.

    Depending on the setup you choose, you may need additional Wi-Fi points or cabling.

  • Buying an access point or repeater as if it replaces the main router

    The Ubiquiti UniFi U6+ is an access point, while the FRITZ!Repeater 3000 AX is designed to extend a compatible network; neither is a main router in its own right.

    Decide in advance which device will remain the router and which equipment will only add Wi-Fi coverage.

    Some setups also require a suitable router, switch or power supply.

  • Assuming a separate Wi-Fi name keeps the archive secure

    Network separation also depends on how the gateway and network ports are configured. If the club processes personal data, security must be appropriate for that processing.

    Check access permissions and the actual separation between the guest and archive networks. The Dutch Data Protection Authority stresses that appropriate security measures need to be tailored to each situation.

    Setting up and managing separate access may require extra configuration and administration time.

Relevant brands to consider

TP-Link

Deco is worth considering for a centrally managed mesh network. The Deco X50-PoE is an option if you want PoE and flexible positioning.

  • TP-Link describes Ethernet backhaul for Deco. For the X50-PoE, the manufacturer lists PoE support and wall or ceiling mounting.
  • Check the exact variant, connection method and PoE equipment required. Stated coverage figures don’t show how the product will perform in your club building.

Ubiquiti

UniFi access points and network management are worth considering if the club wants to set up wired points and separate networks.

  • Ubiquiti describes assigning VLANs to Wi-Fi networks; the UniFi U6+ has one GbE network port.
  • The U6+ is an access point, not a standalone router. Network separation requires suitably configured network equipment.

ASUS

ZenWiFi AX (XT8) is a mesh option if you can’t connect every point by cable.

  • ASUS describes a configurable dedicated wireless backhaul band and a wired backhaul option for the XT8.
  • The product information doesn’t tell you how well the signal will travel through the floors of a particular club building.

FRITZ!

The FRITZ!Repeater 3000 AX may suit a club that wants to extend a compatible existing FRITZ! mesh network.

  • FRITZ! lists two gigabit LAN ports for this model and describes LAN bridge mode within FRITZ! Mesh.
  • The repeater is an extension, not a main router. Check compatibility and coverage at the intended location.

Joybuy products for Wi-Fi across floors

This Joybuy selection includes TP-Link Deco mesh kits for multi-point Wi-Fi. Check the pack contents and suitable connection between the points for each variant. For the X50-PoE, you’ll also need to make sure the PoE equipment is suitable for your installation.

TP-Link Deco BE68 2-Pack

TP-Link Deco BE68 2-Pack

Suitable for a club that wants to use multiple Wi-Fi points and may have a cable connection between the mesh points.

The product name specifies a 2-pack.

Joybuy
TP-Link Deco X50 3-Pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-Pack, dual-band Wi-Fi 6

Suitable for a club that wants to use multiple mesh points and check whether wired backhaul is possible with its existing setup.

The product name specifies Wi-Fi 6 (802.11ax), dual-band 2.4 GHz/5 GHz and a 3-pack.

Joybuy
TP-Link Deco XE75 Pro 3-Pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro 3-Pack, tri-band Wi-Fi 6E

Suitable for a club that needs multiple mesh points; check how you want the points to connect and the coverage at the archive locations.

The product name specifies tri-band 2.4 GHz/5 GHz/6 GHz, Wi-Fi 6E (802.11ax) and a 3-pack.

Joybuy
TP-Link Deco XE75, tri-band Wi-Fi 6E

TP-Link Deco XE75, tri-band Wi-Fi 6E

Suitable for a club considering a mesh setup across several floors; check the pack variant and where you intend to position the points.

The product name specifies tri-band 2.4 GHz/5 GHz/6 GHz and Wi-Fi 6E (802.11ax).

Joybuy
TP-Link Deco X50-PoE 3-Pack, dual-band Wi-Fi 6

TP-Link Deco X50-PoE 3-Pack, dual-band Wi-Fi 6

Suitable for a club that wants to position multiple mesh points and has, or plans to install, suitable PoE equipment.

The product name specifies PoE, Wi-Fi 6 (802.11ax), dual-band 2.4 GHz/5 GHz, two Ethernet ports and a 3-pack.

Joybuy

Frequently asked questions

Can we keep our existing internet provider’s modem?

Yes. You can keep using your existing modem as the router if the equipment and settings you choose are suitable. TP-Link describes an access point mode for Deco; check the mode and port layout of your chosen kit before connecting it.

How can you check the connection between mesh points after installation?

Check whether the archive is accessible on every floor where you need it. According to TP-Link, you can use the Deco app to check whether each satellite is connected via Ethernet backhaul.

What equipment and installation requirements should the club check in advance?

Check which switches, PoE equipment, cabling and management features your planned setup requires. What you need will depend on the equipment you choose and your existing network configuration.

Does Wi-Fi in a Dutch club building require a licence or registration?

The Dutch Authority for Digital Infrastructure (RDI) states that Wi-Fi can be used without a licence at home or in business premises if you use the designated frequencies and comply with the conditions of use. The RDI says that licence-exempt frequency use does not require notification or registration.

Is a guest network enough to secure an archive containing personal data?

Not necessarily. If the club processes personal data, the GDPR requires appropriate security based on the risks. The Dutch Data Protection Authority lists network segmentation, authorisation, updates and backups among the possible measures, and stresses that the right combination needs to be tailored to the situation.