Who is this setup for?

Presenters working across multiple floors

You move between workspaces or meeting rooms and want to connect to the presentation screen wherever you are. For Cast, Google recommends that your device and receiver are on a Wi-Fi network where they can reach each other.

Users with network cabling on each floor

You can connect Wi-Fi points by cable and want to weigh up whether standalone access points or a mesh system with Ethernet backhaul will work with your existing network.

People managing an existing network

You may want to keep your current router and find out how an extension, guest access or isolation setting could affect wireless presentations.

What should you look for when buying?

First, map out your presentation spaces and available cabling. Then choose a setup and check that the presenter and receiver can reach each other on the network.

What to consider What should you check? Who should pay extra attention?
Coverage in presentation spaces Map out the rooms you use and test the connection on each floor. Don’t treat stated coverage as a guarantee for your building. I want to present in every workspace or meeting room without guessing whether the signal will reach through a floor. Around 31% of consumers prioritise coverage in presentation spaces.
Connection between Wi-Fi points Check whether cables and ports are available and whether the system you choose supports Ethernet backhaul. If there’s no cabling, test the connection where you plan to place each point. If I’m extending Wi-Fi across multiple floors, I want to know whether the points can be wired or will rely on a wireless connection. Around 25% of consumers prioritise the connection between points.
Access to the presentation screen Check the presentation protocol and whether AP or client isolation will block communication between the presenter and receiver. I want to find the screen from my laptop or phone without turning off network security for all visitors. Around 25% of consumers prioritise communication with the receiver.
Compatibility with existing equipment Check what your current router will continue to do, what’s included in the system and whether the version you choose comes with the required cables and power supply. Also check the documentation and CE marking for the exact product version. If I want to keep my router, I want to know in advance what extra equipment and setup I’ll need. Around 19% of consumers focus mainly on compatibility with existing equipment and setup.

Common mistakes

  • Assuming stated coverage guarantees a signal on every floor

    Coverage figures depend on the system and don’t tell you whether the connection will remain usable through the floors and walls in your building.

    Make a note of your presentation spaces and test the connection on each floor before deciding how many Wi-Fi points you need.

    If a space turns out to have poor coverage, you may need an extra Wi-Fi point or cabling.

  • Using an isolated guest network for Google Cast

    Client or AP isolation can stop the presenter from reaching the receiver on the local network.

    Test the protocol you plan to use and give only the devices that need to work together the necessary network access.

  • Mistaking a standalone repeater or access point for a complete router system

    A repeater extends a compatible existing mesh network, while an access point is a standalone Wi-Fi point. Neither automatically replaces all the components of a router system.

    Check which equipment you’re keeping, what’s included with the product and what power supply and installation are required.

    With a standalone access point, you may need to buy a router, extra Wi-Fi points or PoE power supply, or arrange installation separately.

Brands to consider

TP-Link

The Deco X50 is worth considering if you’re looking at a mesh setup with points spread across multiple floors.

  • TP-Link lists three gigabit ports on each Deco X50 point, with versions available in packs of one, two or three.
  • The stated coverage is a manufacturer specification, not a guarantee of coverage in a specific building. Check the exact version.

ASUS

ZenWiFi XD5 is a mesh option if you might want to connect the points using existing Ethernet cabling.

  • ASUS documents Ethernet backhaul and the option to use one network name or separate names for each frequency band.
  • Some Wi-Fi 6 features require compatible devices; 160 MHz on 5 GHz isn’t available everywhere.

FRITZ!

The FRITZ!Repeater 3000 AX is designed to extend a compatible existing FRITZ! mesh network.

  • FRITZ! lists three radio bands and two gigabit LAN ports for this model.
  • It’s a standalone repeater, not a complete system with multiple mesh points and a router.

Ubiquiti

UniFi U6+ is a standalone access point for a wired Wi-Fi location, with network management that you configure yourself.

  • The official specifications list one gigabit Ethernet interface, PoE power and guest isolation options.
  • The U6+ isn’t a complete router system, so factor in the required installation and power supply.

Google

Nest Wifi Pro is an option for a mesh setup where the points can be connected to each other by cable.

  • Google documents Ethernet backhaul for Nest Wifi Pro.
  • Nest Wifi Pro can’t be combined with Nest Wifi or Google Wifi in the same mesh network. Older Nest Wifi points don’t have an Ethernet port, so check which generation you have.

Joybuy product picks

These product picks focus on mesh routers and mesh systems for extending Wi-Fi wirelessly across multiple rooms. Check the connection requirements, what’s included in the system and the documentation for the exact product version.

TP-Link Deco E4 mesh system, 3-pack, dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack) Wi-Fi 5

Suited to anyone looking to place multiple mesh points across different rooms.

3-pack; dual-band (2.4 GHz and 5 GHz); Wi-Fi 5 (802.11ac).

Joybuy
ASUS RT-AX52 AX1800 AiMesh router, dual-band

ASUS RT-AX52 AX1800 AiMesh router

Suited to anyone looking for an AiMesh-compatible router to extend their network with other compatible routers.

Dual-band (2.4 GHz and 5 GHz); Gigabit Ethernet.

Joybuy
TP-Link Deco X50 mesh system, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack) Wi-Fi 6

Suited to anyone looking for multiple mesh points to spread Wi-Fi across different areas.

3-pack; dual-band (2.4 GHz and 5 GHz); Wi-Fi 6 (802.11ax).

Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600 Wi-Fi 7 Mesh Router

Suited to anyone looking for a dual-band mesh router for a network that can be extended with mesh units.

Dual-band; Wi-Fi 7.

Joybuy
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

Huawei eKit OptiX FG630 AX3000 Wi-Fi 6 Mesh Router

Suited to anyone looking for a mesh router for a network with multiple Wi-Fi points.

AX3000; dual-band; Wi-Fi 6.

Joybuy

Frequently asked questions

Is a higher stated Wi-Fi speed enough to get coverage on every floor?

No. A stated speed doesn’t prove that Wi-Fi will work in every presentation space. First choose the locations and how the Wi-Fi points will connect, then test the spaces you actually use.

Why doesn’t my Google Cast screen appear on my laptop or phone?

Check that the presenter and receiver are on the intended local network and that AP or client isolation isn’t blocking communication between them. Don’t simply turn off isolation for all guests; set up access for the devices that need to reach each other.

Can I connect existing Nest Wifi points by cable or combine them with Nest Wifi Pro?

According to Google, Nest Wifi points don’t have an Ethernet port and can’t be connected by cable. Nest Wifi Pro also can’t be combined with Nest Wifi or Google Wifi in the same mesh network. Check which type of point you already have.

Do I need a permit or registration for ordinary Wi-Fi in the Netherlands?

The Dutch Authority for Digital Infrastructure lists Wi-Fi as an example of frequency use that doesn’t require a permit, notification or registration. When buying, also check the documentation and CE marking for the exact product version. Your Europe explains that the CE marking represents the manufacturer’s declaration that the product complies with the applicable EU rules.

Do my rights end when the manufacturer’s warranty expires?

No. According to the Dutch government, the Netherlands has no fixed statutory warranty period. A manufacturer’s warranty is additional; if a product is faulty, you can contact the seller. The right solution depends on the circumstances of the purchase and the fault.